MBP
-
Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…
-
Graduated Safelock cap Sterile or non-sterile Three capacities Graduated microcentrifuge tubes employ the Safelock cap, an advanced locking system for safe centrifuging, boiling, freezing, incubation or storage of samples. The cap snaps close and the lock slides into place in…
-
Perform applications accurately and consistently without compromising protection with the Thermo Scientific™ ART™ Barrier Reload System, which provides an environmentally-responsible solution without compromising sterility. With offset wells that allow the tips to stack, this advanced system…
-
Clear versions of Tecan tips are designed for researchers not using the conductive features of their platforms or requiring visual confirmation of their pipetting. These crystal clear tips are available in four sizes, sterile or non-sterile and with or without the ART barrier. Tips fit Tecan…
-
Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…
-
Tip ART 200ul St
MBPTips ensure 100% protection against aerosol and liquid contamination. The SoftFit* tip design and sturdy rack are ideal for multichannel pipettors. Tips also fit most 200µL single-channel pipettors. The ART barrier traps contaminants, keeping them out of pipettors and samples. This also…
-
The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…
-
Racked Pre-sterilized Certified Pure
-
Frosted or non-frosted Graduated or non-graduated Three capacities: 0.6, 1.5 and 2.0 mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available…
-
ART self-sealing barriers trap contaminants, such as aerosols and liquids, keeping them out of pipettors and samples. This allows the user to conduct PCR† procedures and pipet radioactive or infectious samples. ART tips are presterilized and certified RNase-, DNase-, DNA-, and pyrogen-free. All…
-
HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Graduated versions are marked at 10, 50, 100 and 200 µL.
-
Reload Inserts for ART™ Pipet Tip Hinged Racks Self-sealing barrier tips block contamination Prevent contamination even under the most demanding conditions 96 tips/tray MBP's Aerosol Resistant Tip (ART®) is a self-sealing filter tip that protects pipettors from…
-
Self-sealing filter tip protects pipettors from crossover contamination by not allowing liquids or aerosols to touch pipettors. Free of pyrogens, DNA, RNA, Rnase, and DNase. Presterilized. Individually wrapped.
-
Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…
-
Extended length prevents contamination Ergonomic design reduces hand fatigue Available with ART® barrier Fits most 1 mL pipettors 1000 Reach pipet tips have extended lengths to prevent contamination by keeping the pipettor shaft from entering the sample vessel. SoftFit design reduces hand…
-
Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid
-
Reduce waste and save bench top and storage space with the advanced Thermo Scientific™ ART™ Nonfiltered Reload System. This system provides an environmentally-responsible option without compromising sterility. Features: Stackable barrier tip packaging allows for tips to pass through offset…
-
Advanced mold designs ensure a secure and airtight fit Dye and metal-free 100% premium grade virgin polypropylene Fine point design provides superior accuracy in drawing and dispensing samples. Bulk packaging is high quality and economical. Sturdy autoclavable rack can be used with…
-
Reversible With lids Designed to hold 0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy…
-
Pre-sterilized Racked Loading acrylamide or agarose gels with standard pipet tips can be time consuming. Specialty ARTS (Aerosol Resistant Tips) tips are self-sealing for gel loading and protect against carryover and cross-contamination.
-
Fits Beckman Biomek FX/NX With a Span-8 Head Liquid Sensing Span 8 for the Biomek FX Make the most of the FX’s liquid sensing capabilities with 20 and 250 µL tips
-
The ART 1000 with SoftFit shoulder provides a secure, universal fit. The ART 1000 is pre-sterilized and individually wrapped.
-
Self-sealing barrier tips block contamination Prevent contamination even under the most demanding conditions Hinged racks 96 tips/tray MBP's Aerosol Resistant Tip (ART®) is a self-sealing filter tip that protects pipettors from crossover contamination by not allowing…
-
Increase pipetting performance with Thermo Scientific™ Automation Tips for the Eppendorf® epMotion® Automated Pipetting System, available in non-sterile, sterile and sterile filtered. Each pipet tip undergoes a rigorous 15-point quality control program to ensure consistency, thus…