The LabStrong LMP01 is an economical and reliable replacement ultraviolet (UV) lamp comparable to the Thermo Scientific Barnstead* LMX13 UV Lamp. The lamp is effective at germicidal and total organic carbon (TOC) reduction in water through the use of 185 and 254 nanometer (nm) UV wavelengths. The…

The preformed nylon pipe, S/V to “T” piece is a replacement part for the four liter and eight liter per hour bi-distilled Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 857X28LS is the direct replacement of the Thermo Fisher…

The Helix™ 250 is an easy-to-use ultra-sturdy open air orbital shaker used for various laboratory shaking applications. The Helix 250 utilizes active feedback PID control and has a long lasting brushless DC motor. Numerous settings available for sound, display, ramp rate, power interruptions…

The stainless steel EZ-Clamp Test Tube Rack Clamp (part number HR0005-6) is a universal test tube rack clamp. All of the LabStrong Test Tube Half Racks can be placed in the EZ-Clamp Test Tube Rack Clamp. The test tube rack clamp features finger-tightening knobs on each end of the clamp that allow…

0163B43 (06276LS): The LabStrong Fi-Streem part number 06276LS is the direct replacement of the Thermo Scientific Barnstead* Fi-Streem part number 06276. The condenser is a replacement part for Fi-Streem Water Purification Stills. Prior to installation of the condenser, salt must be emptied from…

The LabStrong cartridge kit is comparable to the Thermo Scientific Barnstead cartridge kit. Side-by-side testing shows fantastic results for purity and longevity. The cartridge kit is used with the Thermo Scientific Barnstead NANOpure* Quad Style water purification systems. The cartridge kit is an…

Flow restrictor for LabStrong™ Fi-Streem™ III still.

The LabStrong B00122 20 Liter HDPE water storage carboy allows for fully automatic operation when connected to Fi-Streem III Stills (A56210-857LS, A56218-857LS, A56220-857LS, A56228-857LS, A56230-857LS and A56238-857LS). The LabStrong B00123 20 Liter HDPE water storage carboy allows for fully…

LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure…

The black “T” piece of John Guest fitting (PM-012) is a replacement part for the Fi-Streem™ Water Purification Stills.

T’ piece, plastic pretreat feed for LabStrong™ Fi-Streem™ III still.

The LabStrong 40 Liter Storage Tank allows for fully automatic operation when connected to Fi-Streem III Stills (A56210-857LS, A56218-857LS, A56220-857LS, A56228-857LS, A56230-857LS and A56238-857LS). The high density polyethylene tank employs a space saving design that can be wall or bench…

1221Z27 Weight: 5 lb. Dimensions: 18.5in x 3.5in. x 3.15in The Disposable Deionizer cartridges contain high quality ion exchange resin. Water purity is indicated by resin color change at two 'windows' in the cartridges casing. Will produce water quality as high as 1 uS…

The LabStrong 740883LS replacement heating element is comparable to the Thermo Scientific Barnstead 740883 and 740895 replacement heating elements. The LabStrong 740883LS is an economical and reliable replacement heating element for Thermo Scientific Barnstead Mega-Pure Glass Stills. The 240V 2500w…

The LabStrong FL0016-1 Final Filter is comparable to the Thermo Scientific Barnstead* D3750 Final Filter. The LabStrong 0.2 micron (µm) Final Filter is designed for use in ultrapure water purification systems. The final filter can be used with all Thermo Scientific Barnstead B-Pure*, E-Pure*…

Space saving design Fully automatic microprocessor controls Automatic drain reduces frequency of cleaning Fully automatic operation in a compact still Dual-fed capability provides for tap or pretreated water Low water protection prevents heater damage Unique vapor trap eliminates…

The LabStrong D00172 High Capacity Two-Bed Hose Straight Nipple Cartridge is an economical way to purify water volumes up to 1.9 liters per minute. The water purification cartridge is suitable for small volume applications such as deionization. The hose straight nipple cartridge is an economical…

Drain valve assembly for LabStrong™ Fi-Streem™ II and III stills. Parts are typically available to ship immediately to limit down time.  

Small silicone sleeve, for LabStrong™ Fi-Streem™ II and III stills

LabStrong EZ-Clamps were designed with the researcher in mind. If you are a researcher who is tired of wasting time with the same old screw down, hard to load flask clamps with over stretched springs and stripped screws, then you need EZ-Clamps! EZ-Clamps do not screw down or over stretch. Instead,…

Silicone rubber tube, internal, 6ft, for LabStrong™ Fi-Streem™ stills.

Angled hose connector for LabStrong™ Fi-Streem™ II and III stills. Parts are typically available to ship immediately to limit down time in the lab.The glass condenser is a replacement part for the Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 562X1LS is the direct…

The LabStrong D00171 Ultrapure/Organic Removal Cartridge Straight Nipple Cartridge is an economical way to purify water volumes up to 1.9 liters per minute. The water purification cartridge is suitable for small volume applications such as deionization, chlorine, and organic removal. The hose…

PVC Tube, blue, 6ft, for LabStrong™ Fi-Streem™ stills. Parts are typically available to ship immediately to limit down time in the lab.

The LabStrong 25001LS Ventguard Filter is comparable to the Thermo Scientific Barnstead* 25001 and 25001-DB Ventgard* Filter. The product is suitable for operation in Thermo Scientific Barnstead water purification system storage reservoirs. The LabStrong Ventguard Filter protects pure water during…

The Sanyo Gallenkamp Oven has been redesigned by Fi-Streem; the result is the Fi-Streem Digital Vacuum Oven. The oven has been upgraded to incorporate a user friendly and easy to operate digital electronic PID controller. The easier and faster control settings improve performance accuracy of the…

AY0017-1 This kit accommodates varying inlet water contaminants. When used, the kit reduces the frequency of cleaning LabStrong Fi-Streem Water Stills and other distillation systems. The kit also provides extended cartridge service life for point of use deionization (DI) water systems, which…

FI-Streem III for general lab uses Four and eight liter/hour Glass components assure virtually no leaching of impurities into the distilled water Microprocessor controlled Easy to operate membrane-type touch pad control panel Patented vapor trap eliminates carry-over of vapor-borne water…

The LabStrong Fi-Streem part number 857X11LS is the direct replacement of the Thermo Scientific Barnstead Fi-Streem part number 857X11. The printed circuit board is a replacement part for Fi-Streem Water Purification Stills.

The LabStrong cartridge kit is comparable to the Thermo Scientific Barnstead cartridge kit. Side-by-side testing shows fantastic results for purity and longevity. The cartridge kit is used with the Thermo Scientific Barnstead E-Pure* ultrapure water purification systems. The water purification…

Reservoir float switch, 2 posn. 4 pin, for LabStrong™ Fi-Streem™ III still. Parts are typically available to ship immediately to limit down time.

The LabStrong LMP01 is an economical and reliable replacement ultraviolet (UV) lamp comparable to the Thermo Scientific Barnstead* LMX13 UV Lamp. The lamp is effective at germicidal and total organic carbon (TOC) reduction in water through the use of 185 and 254 nanometer (nm) UV wavelengths. The…