INSTOCK Labs
-
Heavy Duty Steel Tables provide a sturdy and stable platform for your most critical lab work while offering the flexibility to move your process to another area or to another lab. This adjustable height table comes with vibration isolation casters and a phenolic or epoxy work surface. The…
-
Stainless Steel and Phenolic Pegboard
INSTOCK LabsThis pegboard is made of type 304 stainless steel with 1/2" diameter, 6" long white polypropylene pegs. Pegboard is 30" tall and is furnished with a 4" wide stainless steel drip trough and clear plastic drain tube.
-
Wall Standards
INSTOCK LabsDouble slotted wall standards are to be used for wall shelving. They vary lengths depending on how many shelves are needed. These are to be used with shelving brackets and shelves. They are of 11 gauge steel construction and 1/2" deep.
-
These durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required.
-
Faucet and Aerator
INSTOCK LabsFoot Operated faucet is deck mounted with a vacuum breaker. Faucet is chrome plated with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats. Faucet has a floor mounted foot operated valve. DI/RO faucet is deck mounted for distilled, deionized or…
-
Vinyl Stool, Medium Height
INSTOCK LabsDesigned for use at desks that are 32"-36" tall. 20.5"-28" adjustable height, measured from the top of the seat to the floor. Backless Stool. Highly durable molded polyurethane foam cushioning covered with easily cleaned antibacterial/antimicrobial vinyl. Black, non-marring casters suitable for…
-
Electrical Wire Raceways
INSTOCK LabsThese electrical raceways are pre-wired single channel aluminum raceways with 120 V, 20 amp GFCI or standard outlets. Includes 8' black power cord with straight blade or twist-to-lock plug.
-
Notched Phenolic Shelving
INSTOCK LabsNotched shelving is 1" thick black phenolic resin with a finished front edge. These shelves are notched to create a pass-thru shelf. They are suited for use with island stanchions. Other sizes and configurations are available upon request.
-
Overhead Service Panels
INSTOCK LabsThese steel overhead service panels are designed to fit into a 24" x 24" ceiling grid. They are made to order based upon services required. Components are sold separately and are shipped loosed to be installed on site.
-
Manufactured Black Work Surface
INSTOCK LabsWe offer laboratory work surfaces in 1" thick black epoxy. These quick ship work surfaces are designed and engineered to suit your specific needs.
-
Laboratory Needle Valve
INSTOCK LabsLaboratory Needle Valves are deck mounted turret base. They are straight pattern forged brass. They have a floating stainless steel needle and replaceable stainless steel seat. The handle is a four-arm handle with a color coded index button/cap.
-
Envision Complete Plumbing Assemblies
INSTOCK LabsEnvision plumbing assemblies are furnished complete and include a fine control needle valve service turret with shank, a service hose as well as a male quick disconnect fitting. These complete assemblies are designed specifically for use in a laboratory environment. All quick connects have 316…
-
Eyewash and Drench Shower
INSTOCK LabsEyewash mounts on counter next to a sink, it swivels 90°. Water flow is activated by flag handle. Each head has a flip open dust cover. The eyewash is chrome plated brass. Eyewash mounts on counter next to a sink, it swivels 90°. Water flow is activated by swinging the spray head over…
-
Cross Members
INSTOCK LabsIsland cross members are used with island stanchions for stability. They are 2" x 3" and include caps and all installation hardware. They are of a 11 gauge steel construction.
-
Fixed Height Heavy Duty Steel Table
INSTOCK LabsHeavy Duty Steel Tables provide a sturdy and stable platform for your most critical lab work while offering the flexibility to move your process to another area or to another lab. This fixed height table comes with leveling glides and an epoxy work surface. The table frame is painted…
-
Adjustable Height Patriot Tables with Uprights
INSTOCK LabsPatriot Tables are a value driven, adjustable height, standard duty table suitable for many basic lab applications. They will normally be placed along the perimeter of the lab providing a flexible lab space. Options include leveling glides, or locking swivel casters These patriot tables…
-
Phenolic Work Surfaces
INSTOCK LabsChemical resistant phenolic or epoxy resin. Front edge is finished and all other edges are square. Work surface curb to be applied to work surface top.
-
Stationary Wire Shelving, Epoxy Coated
INSTOCK LabsStationary wire epoxy coated shelving is furnished in metroseal 3 epoxy. Corrosion resistant finish for wet or high humidity environments. Each unit includes 4 posts, 4 shelves and split-sleeves to attached shelves to posts. Open wire design minimizes dust accumulation and allows circulation for…
-
32 3/8" Tall Mobile Cabinets, Right Hinged
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Stationary and Mobile Security Units
INSTOCK LabsStationary Security Units have a durable chrome finish that will not chip or flake. Double doors each open 270° and can be secured along the sides of the unit. Units come with both top and bottom shelves and two internal wire shelves. Mobile Security Units have a durable chrome finish that will…
-
Envision Workstations with Phenolic Work Surfaces
INSTOCK LabsEnvision workstations are designed for back to back use for optimal lab layout flexibility. They have a heavy duty powder coated steel construction. Painted Pearl White. The work surface is phenolic and the frame is adjustable from 30"-36". Each table includes three tiers for…
-
Standing Height, Acid Storage Cabinets, Left Hinged
INSTOCK LabsAcid Storage Standing Height Cabinet are used to store acids and are lined with a chemically resistant polyethylene liner. Full height doors are lined with 1/8" thick polyethylene. Chemical resistant 3/16" thick molder polyethylene lining with coved corners and 2" lip at front…
-
-
Bench Mounted Reagent Poles
INSTOCK LabsReagent poles are 1" diameter painted steel poles that are threaded at both ends. Poles bolt through the work surface for secure mounting. Reagent poles can stack to create tiered phenolic resin shelves in the center of the bench. Hardware is included for each installation. …
-
Sinks
INSTOCK LabsThese durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. …
-
Rear Wall Cabinet
INSTOCK LabsRear Wall Cabinet Fillers are used to close the space between the rear of the wall cabinet and wall created by the hanging rail. The filled is only needed when the end of the cabinet is exposed.
-
Bookend Brackets
INSTOCK LabsBookend brackets can be sued with island stanchions or wall standards to support shelves. Brackets are of a 14 gauge steel construction.
-
Rear Retaining Lips
INSTOCK LabsRear retaining lips provide a 1" rear lip for island or peninsula shelving when used with 1" thick phenolic resin shelves. They attach to the bottom of the shelf. Rear retaining lips are of a painted steel 16 gauge steel construction. Other sizes are available upon request.
-
Sitting Height Base Cabinets with 3 Drawers
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Vinyl Chair, Medium Height
INSTOCK LabsDesigned for use at desks that are 32"-36" tall. 22"-29" adjustable height, measured from the top of the seat to the floor. Standard back of 11.5". Highly durable molded polyurethane foam cushioning covered with easily cleaned antibacterial/antimicrobial vinyl. Black, non-marring casters suitable…
-
Sitting Height Base Cabinet, Left Hinged
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Standard Electrical Outlet Strip and Bin Rails
INSTOCK LabsThis electrical outlet strip and bin rail are furnished with all hardware for attachment to Patriot tables with uprights. All electrical outlet strips are 24" long and include 20 amp wiring, 8 each 20 amp outlets and a 20 amp circuit breaker. They include 6' cord with a 20 amp NEMA…