Teflon ® PTFE tipped plungers Replaceable barrels, plungers and tips mL sizes For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel, achieving the seal required for…

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

1700 series, gastight syringes with cemented needles. Length: 1.71 23s-26s gauge AS Point Style

Designed for the analysis of drinking water samples according to EPA purge and trap concentration techniques Easy-to-remove syringe plunger for loading water samples into syringe barrel. Internal standard or surrogate sample can be added directly through twist valve.

The Kel-F hub is made from CTFE plastic. Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are…

Reinforced plungers Cemented or removable needles Economical Similar to 800 series syringes, except these lower-cost syringes do not have adjustable plunger friction or a plunger stop. Order 8929F64 for replacement needle for removable needle syringes.

Volume 2.5 mL Syringe Type Gastight Syringe Series 1000 Termination PTFE Luer Lock (TLL) Needle Metal (N) or Kel-F Gauge No Needle Included Point Style No Needle Included Needle Length No Needle Included …

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…

Hamilton 80550 705CA 50µl Carbon Analyzer Syringe with Cemented 24g x 2" Point Style 3 Needle incorporates a special luer tapered hub cemented over a 700 series syringe. It is used in conjunction with total organic carbon analyzers to monitor waste water and environmentally sensitive…

Volume 100 µL Syringe Type Microliter Syringe Series 700 Termination Special Needle Cemented Needle Gauge 24 gauge Point Style 3 Needle Length 2 inch (51 mm) Needle Inner Diameter 0.0122 inches…

Removable needles Length: 2.756” Point style: 3 Replacement needles available on special order.

The Hamilton 1700 series 10 uL syringe is suitable for use with cemented needles. This syringe model offers SST, borosilicate glass and PTFE fluid path. This 26s gauge syringe can be used at a pressure rating of up to 1000 psig and temperature rating of up to 10 to 50 degree C. Built-in chaney adapter

Hamilton offers a wide variety of syringes specifically designed for Shimadzu autosamplers that require 43 mm needle lengths as well as standard 51 mm lengths.

The Hamilton 1700 series 500 uL syringe features PTFE luer lock (TLL) termination. It is suitable for use metal (N) or kel-F needles. This syringe model offers borosilicate glass and PTFE fluid path. It can be used at a pressure rating of up to 200 psig and temperature rating of up to 10 to 115…

Gastight syringes for injection of Gas and Liquid Samples. Removable Needle (RN), (point style 2) Autoclavable needles are 51 mm 22s gauge

Volume 1 mL Syringe Type Gastight Syringe Series 1000 Termination Diluter PTFE Luer Lock (D) Needle No Needle Available Fluid Path Borosilicate glass, PTFE, PCTFE Plunger Style Instrument Plunger Stop (X) …

Volume 1 mL Syringe Type Gastight Syringe Series 1000 Termination PTFE Luer Lock (TLL) Needle Metal (N) or Kel-F Gauge No Needle Included Point Style No Needle Included Needle Length No Needle Included …

Volume 250 µL Syringe Type Microliter Syringe Series 700 Termination Special Needle Cemented Needle Gauge 24 gauge Point Style 3 Needle Length 2 inch (51 mm) Needle Inner Diameter 0.0122 inches…

The Hamilton 700 series 10 uL syringe is compatible with small removable needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig and temperature rating of up to 10 to 115 degree F.

The Hamilton 1000 series 50 mL syringe is suitable for use with metal (N) or kel-F needles. This syringe model offers borosilicate glass, PTFE and PCTFE fluid path. It can be used at a pressure rating of up to 100 psig and temperature rating of up to 10 to 80 degree C.

The Small Hub Removable Needle (RN) is compatible with RN syringes from 2.5 µL to 100 µL. Needles are available from 34 to 18 gauge. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the length and point style will need to be specified prior to…

The Hamilton 1000 series 1 mL syringe features luer tip (LTN) termination. It is suitable for use cemented needles. This syringe model offers SST, borosilicate glass and PTFE fluid path. It can be used at a pressure rating of up to 200 psig and temperature rating of up to 20 to 50 degree C.

Hamilton 84302 CR-700 200µL CR700-200 Constant Rate HPLC Syringe with 22g x 2" x PT3 Needle has preset volumes that can be dispensed at a constant flow rate. The volume is adjustable with a precise adjustable micrometer screw. The adjusted volume can be fixed with a locking ring.…

The Small Hub Removable Needle (RN) is compatible with RN syringes from 2.5 µL to 100 µL. Needles are available from 34 to 18 gauge. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the length and point style will need to be specified prior to…

Hat type needles are designed to be connected directly to a flat bottom valve port. Use the needle bushing part number 35056 to connect the needle directly to any 1/4-28 Hamilton valve. Hat needles are sold in three-packs. Application: Designed to Be Connected Directly to A Flat Bottom Valve Port

The most accurate manually operated syringes available Consistent plunger position LCD NIST Traceable Ergonomically designed syringes have a fine adjustment thumbwheel for easy volume control. Plunger drag adjustment optimizes the rate of plunger movement to the…

Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. Needles are 304 stainless steel (sst.) Standard needle length is 2" / 51 mm Metal hub (N) needles are available in convenient six packs Custom needle lengths and point styles are available

Volume 1 µL Termination Knurled Hub (KH) Needle Knurled Hub (KH) Gauge 25s gauge Point Style 3 Needle Length 2.75 inch (69.9 mm) Needle Inner Diameter 0.005 inches (0.13 mm) Needle Outer Diameter 0.019…

The Metal hub is made from nickel plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs…

Volume 500 µL Syringe Type Microliter Syringe Series 700 Termination Cemented Needle (N) Needle Cemented Needle Gauge 22 gauge Point Style 5 Needle Length 2 inch (51 mm) Needle Inner Diameter …