Low Power, high resolution front panel output with variable voltage and frequency HighPower rear panel output supplies line frequency and voltage Low Power Measurement (10mW to 100W) for testing power consumption of small devices or standby power at different voltages and frequencies High…

The RH200W-T is a transmitter for Extech's RH200W Hygrothermometer base station. Sync up to 8 transmitters to the base station for continuous monitoring. Transmitters can be up to 98 feet from the base station. Includes a transmitter and 2 AA batteries.

Perform OSHA and IEC Noise accumulation surveys Adjustable Criterion Level, Exchange Rate, and Threshold Applications include Personal accumulated noise exposure measurement, Workplace noise assessment, OSHA and other regulatory agency compliances Datalogs up to 4500dB readings when used as a…

Automatically stores up to 16,000 readings or manually store/recall up to 99 readings Wide range to 40,000Fc or 400,000 Lux Cosine and color corrected measurements Utilizes precision silicon photo diode and spectral response filter Peak mode (10µS) captures highest reading Relative mode…

Extech’s SD900 allows technicians to easily monitor and record DC mA values from 3 external sensors, transducers, and other sources using one meter. It also stores the time and date of when readings are taken. The logger features a large triple LCD display and records data on an SD card in an…

Insulated inductive probe prevents shorting conductors Tests wire trace, continuity test, clear/busy/ringing line test and tip/ring identification Alligator clips for non-terminated cables and modular connectors for direct connections to telephone and internet wiring Built-in speaker…

Tests voltage up to 10kV and measures Insulation Resistance to 500GOhm High test voltages up to 10kV with Insulation Resistance to 500GOhm Polarization Index (PI) measurement Dielectric Absorption Ratio (DAR) measurement EnerSave™ limits test duration to 10 seconds to save…

The MO50 is a compact pin moisture meter. MO50 displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete and mortar. This product is complete with pins (4), protective cap and 9V battery.

The PQ3450-2 is a 200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 200 Amp Current Clamps; Optional 1200 Amp Current Clamps or 3000…

Precision Current & Voltage Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 0 to 20V DC calibration source Up to five user adjustable calibration presets Palm-sized double molded housing and large dot-matrix digital backlit LCD Standard banana I/O ports Large…

The CTH10 is an attractive wall clock features an oversized 4.3" (109mm) digit time display that can be easily view from a longer distance than regular sized clocks. It receives Time Code from NIST Radio Station WWVB and it automatically adjusts year, date, day, hour, minute, second, and…

The Extech Spare Reflective Tape is designed for use with non-contact Photo Tachometers, making it easier to measure the speed of rotating objects. Includes: 10 reflective tape strips

Waterproof meter with high-accuracy multi-ranging sensor Units of measure include µS/cm, mS/cm, ppm, ppt Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value Large 3-1/2 digit (2000 count) LCD display Data Hold and low…

Dual Laser Targeting Choose from 12" or 30" distance model where two laser points converge to 1" target spot White backlit dual LCD display Fast 0.15 second response time with Max display Adjustable emissivity increases measurement accuracy for different surface Adjustable…

Programmable heat index alarm Displays temperature, humidity, and heat index Calendar mode displays day, date and time Stopwatch/chronograph mode with1/100 second resolution Fastest/Slowest/Average Lap recall 99 lap counter with 30 lap/split memory 10 hour countdown timer with audible …

Large easy to read (99,999 count) LCD display Autoranging with 0.1% basic accuracy Hold button freezes displayed reading Ergonomically designed and pocket sized housing with protective finger guard Easy to operate by simply contacting the rotating object with the sensor tip and read …

Datalogs 32,000 readings (16,000 for each parameter: humidity/temperature) Dew point indication via Windows® software (included) Selectable data sampling rate: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr User-programmable alarm thresholds for RH and temperature Status…

Measure the Light Intensity for White LED Lights Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units Built-in sensor with protective cover 4000 count LCD display Cosine and color corrected measurements Min/Max Average and Auto Power Off Complete with 2…

Highest 2% RH Accuracy Less than 30 second RH response time Dual backlit display Simultaneous display of: Humidity/Temperature, Humidity/Dew Point, Humidity/Wet Bulb Slim design with rubberized sides for better grip and for one hand operation • Data Hold and Min/Max functions Auto power…

Measures Air Velocity, Air Flow and Temperature 4" (10cm) vane allows for more precise readings on larger size ducts Air Velocity, Air Flow and Temperature Built-in thermistor for air temperature Multipoint and timed average calculations Min/Max, Data Hold, and Auto power…

The TB400 includes all the accessories needed to conveniently test the turbidity of municipal water, including food processing and beverage manufacturing, and other applications in which fluid clarity is vital. Microprocessor-based circuitry assures high accuracy and repeatable readings. Requires…

The TM55 is constructed in a compact ultrasonically welded splash-proof (IP65) housing with folding 2.4" stainless steel probe and is NSF certified for measuring temperature in liquids, pastes, and semi-solid food. It measures from -40 to 482°F (-40 to 250°C). It has fast response time…

Built-in Smart chip offers advanced functions and features to a stick style pH meter not found anywhere else RENEW feature that tells you when it's time to replace your pH electrode CAL feature that tells you when it's time to recalibrate your meter Flat Surface pH electrode that is…

12:1 Non-Contact IR Thermometer with High-Temperature Type K Input Compact non-contact InfraRed (IR) Thermometer measures up to 1112°F (600°C) with built-in laser pointer to identify target area and improve aim. Type K input allows for high temperature measurements up to 1832°F…

Oxygen level displayed as % Saturation or Concentration (mg/L [ppm]) Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments) Adjustable Salinity Compensation from 0 to 50ppt Analog bargraph indicates trrends Memory stores up to 25 data sets with DO and Temperature reading …

Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F Analog bargraph indicates trends Memory stores up to 25 labeled readings Adjustable Conductivity to TDS ratio from 0.4…

The SDL900 is an AC/DC Magnetic Meter and Datalogger with automatic temperature compensation. The SDL900 utilizes Hall effect sensor. This meter features an adjustable data sampling rate from 1 to 3600 seconds. Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, 6 AA…

Extech's RH35 monitors Humidity, Temperature, and Dew Point for the previous 24 hours and alerts users to indoor mold hazard conditions starting with a frown icon warning when humidity reaches 60%RH. When the RH exceeds 65%, a loud audible alarm and bright flashing red LED will be triggered.…

High accuracy and performance for low resistance measurements Large 0.7" (18mm) LCD 1999 count Manual zero display adjust Overrange indication Compact, durable field service housing with protective cover Complete with 4-wire cables with Kelvin clip connectors

Features: Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes) Low detection limit down to 0.01ppm Wide dynamic range of measurement up to 10ppm (use dilution method for 10 to 50ppm) Unaffected by sample color or turbidity Automatic…

Datalogs up to 18,000 readings on each channel Display [T1, T2, T3(IR)] or [T1-T2] or [T1-T3] or [T2-T3] Differential T1-T2 display for HVAC/Superheat measurements Heavy Duty rugged double molded housing MAX/MIN/AVG and Data Hold Use IR Thermometer probe to measure non-contact surface…

Datalogging Thermometer with 6 Thermocouple Types (J, K, E, T, R, S) Features: Simultaneously displays CH1 to CH8 or CH9 to CH12 Offset adjustment used for zero function or to make relative measurements Stores 99 readings manually and 20M readings via 2GB SD card Records…