Scintillation vials are 20mL made from Wheaton 180 low potassium borosilicate glass Available with caps attached, caps packaged separately or without caps Packaged in corrugated trays of 100 Glass Vials are manufactured from Wheaton 180 low potassium borosilicate glass that conforms…

In Lab File® Carton Of “300” borosilicate glass With attached “Biogrip” screw caps with butadiene-styrene rubber liners Packaged in Wheaton Lab File carton containing two pull-out cardboard drawers.

Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make…

Limited Volume Inserts

Fitted with rubber liners Borosilicate glass, Wheaton “200” glass Consists of screw neck vials and attached 2386Q20 series cap fitted with rubber liners Packaged in Wheaton Lab File® carton containing two pull-out cardboard drawers. Listings show height x diameter.

Vials with caps attached packaged in partitioned trays Made from borosilicate glass Case of 72

Flint glass, with slight shoulder Tight-fitting polyethylene cap, with thumb tab, can be removed and applied easily with same hand in which vial is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays that can be pulled out as drawers.

Capacity 20 mL (9718J15, J20)     Precapped     Vials are of higher density polyethylene with lightweight walls for increased counting efficiency Total height: 61 mm; o.d.; 27 mm. Sold in cases of 500 containing 5 trays of 100 vials. 9718J15…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

Amber non-graduated glass vials with solid top black phenolic caps Teflon® faced 14B rubber liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and…

Mouth OD 28.5mm Use with WHEATON tamper evident safety cap Large labeling surface for easy product identification Manufactured from WHEATON 900 soda-lime amber glass that conforms to USP Type III requirements Use the 0913V96 Crimper to secure the tamper-evident safety caps (1220Q54 or…

Disposable, with press-fit cap Of high-density polypropylene with friction-fit cap Can be incinerated 9718E60 has a capacity of 4 mL ; O.D. x height: 13 x 57 mm. 9718E66 has a capacity of 6 mL ; O.D. x height: 15 x 57 mm. Sold in cases of 1,000 with vials and caps packed…

Tear-Off, Tear-Out, or Flip Cap

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

Sample Vials in Lab File are packaged in corrugated trays with partitions. Clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements, and amber vials are manufactured from Wheaton 320 glass that conforms to USP…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. Amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements…

Economically priced Clear and amber vials made from borosilicate glass Vials and screw caps packaged separately Choice of screw cap liners for aqueous samples

Manufactured from clear and amber Type I borosilicate glass Designed primarily for use in the Waters WISP 48-position and other autosamplers Packaged in shrink-wrapped trays of 100 for convenience and cleanliness

Attached screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely…

Clear, non-graduated glass vials with solid top black phenolic screw caps Teflon® faced 14B rubber liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with…

Manufactured from polypropylene 300 µL conical interior reduces sample size Available with snap/crimp or screw top finish 100 vials per shelf pack/1000 vials per case ABC screw top requires 9mm closure Screw top requires 8-425 closure Snap/Crimp top requires 11mm closure

Clear or amber Range of sizes Teflon-lined caps The organic series consists of clear and amber glass vials with solid or open top closures. The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone…

11 mm crimp finish 12 x 32 mm With or without patch Color coded PE caps E-Z Vials and Snap Caps are available assembled together in convenience packs of 100. The clear vials are made of Type 1 borosilicate glass. The Snap Caps are available in five colors: Natural, Red,…

General purpose vials can be used for liquid scintillation counting, sample collection and storage applications. HDPE is a robust material providing a high degree of resistance to many organic solvents. The convenient 6ml volume is compatible with standard liquid scintillation counter systems and…

Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Screw caps available separately

Use with E-Z Vials® and ABC Vials® Ideal for limited sample volume applications

11 mm crimp finish 12 x 32 mm With or without patch Color coded aluminum seals E-Z Vials and 11 mm Aluminum Seals are available assembled together in convenience packs of 100. These amber vials are made of Type 1 borosilicate glass. The aluminum seals are available in four colors:…

Amber non-graduated glass vials with screw thread finish Screw caps not included Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and open top screw cap or serum finish …

11 mm crimp finish 12 x 32 mm With or without patch Color coded aluminum seals E-Z Vials and 11 mm Aluminum Seals are available assembled together in convenience packs of 100. The clear vials are made of Type 1 borosilicate glass. The aluminum seals are available in four colors:…

Autoclavable Attached screw caps Rubber lined caps Clear sample vials have solid top black phenolic caps that are Teflon faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely…

Clear, non-graduated glass vials with open top black phenolic caps Teflon® faced silicone liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass …

Clear and amber vials made from borosilicate glass Screw caps available separately