Corning, 250 mL
-
Utilizes PVC-coated borosilicate glass, which helps contain glass and contents should breakage occur Chemically and thermally resistant Excellent optical clarity Mechanically durable Autoclavable or microwaveable at 121°C (250°F)
-
Tall Form PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and…
-
Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings. Glass beads indicate full capacity line. Permanent white enamel…
-
Calibrated to contain at 20°C Red stripe, through which calibration mark is etched into transparent glass underneath Supplied with plastic snap cap
-
These PYREX® wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking…
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
Chemical and thermal resistant Graduated Screw cap Bottles are made from PYREX® borosilicate glass for enhanced chemical and thermal resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and…
-
Suitable for shaker culture applications Optically clear polycarbonate Sterilized by gamma irradiation Certified nonpyrogenic Certified RNase- and DNase-free Corning Baffled Erlenlenmeyer Flasks are for use in shaker culture applications. Models are available with vent caps…
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line…
-
Transluscent polypropylene beakers printed with blue graduations.
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
PYREX Heavy Duty Beakers
CorningExtra-heavy walls and rim minimize breakage These heavy duty beakers are specifically designed to offer the best mechanical strength under harsh conditions, such as mechanized washing operations. For convenience, the 250 through 4000mL beakers have a double graduated metric scale to indicate…
-
Glass Stoppered Bottles
CorningNarrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…
-
These beakers are transluscent with a raised graduation scale. They feature high temperature and chemical resistance.
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
These PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy…
-
Safety Coated Aspirator Bottles
CorningChemically and thermally resistant PYREXplus® borosilicate glass bottles offer good optical clarity and durability PVC coating helps contain glass and contents should breakage occur Autoclavable or microwaveable to 121°C (250°F) Resistant to thermal shock Bottle…
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
PYREX® VISTA™ Filtering Flasks
CorningMicro Filtering Flasks These PYREX® VISTA™ micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the…
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
These flasks are for use in determining phosphoric acid in mixed fertilizer. Flasks feature a wide neck and heavy construction throughout.
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
These 250mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material: Borosilicate Glass…
-
PYREX Brand Hydrometer Cylinders
CorningBreakage is minimized by the heavy wall construction The large hexagonal base, sealed to the cylinder body, increases stability and prevents the cylinder from rolling off lab bench tops
-
Transluscent polypropylene graduated cylinders are manufactured with raised graduations at the primary scale points. Cylinders have a hexagonal base and are calibrated "to contain" (TC). Tolerances according to ISO 6706. Exposure to temperatures above 60°C may affect accuracy.
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Iodine Flasks
CorningFor the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions