Chemglass, Bottles
-
Septum Stoppers, Sleeve Type
ChemglassSleeve type stoppers with a hollow plugs and sleeve extensions that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after the needle is withdrawn. Available in either RED or WHITE rubber.
-
Preassembled GPI 13-425 Septa Caps
ChemglassPre-assembled closure and septa minimize contamination from handling.
-
DROPPER BOTTLE, NATURAL, 10mL,/0.33oz LDPE plastic bottle Purchase components separately
-
Septa PTFE/Sil Bonded Closure Vials
ChemglassThese convenience packs come with 100 bonded closures and vials packed seperately. Closures with bonded septa are not attached.
-
Bottles, Solution, Pyrex®, Carboy, Glass
ChemglassThese bottles are designed for storage of solutions and are ideal for media preparation. The 9.5L (2.5 gallon) and 13.25L (3.5 gallon) sizes are in a conventional bottle shape. The 19L (5 gallon) and 45.5L (12 gallon) sizes are similar in design to a carboy. The 19L size is weight controlled to 15…
-
Stopper, Flask Length, Pennyhead
ChemglassAll sizes are solid with the exception of the #38 (CG-3018-08) which is hollow.
-
Solid Cap, PTFE Seal, GL-14 Thread
ChemglassCap is made from PBT (thermoplastic polyester) and will withstand temperatures from -45 to 200°C. PTFE seal is also available separately.
-
Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap® valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging…
-
Similar to the AF-0450 5-port line, except that the line is constructed using 0-4mm Chem-Vac™; Chem-Cap®; valves (A) instead of the CG-468-02 greased glass stopcocks on all of the 4-ports. The end cap on the vacuum line is a #30 o-ring joint while the inert gas line has a #9 o-ring joint…
-
Flexible and compact, this 4-port line is constructed using CG-474-02, 4mm double oblique hollow high vacuum greased stopcocks on all four ports. Ports are fitted with two 14/20 inner joints and two 24/40 inner joints and are spaced 5" center to center. This configuration permits use directly…
-
Foam Plug
ChemglassFOAM PLUGS FOR TEST TUBES AND LABORATORY FLASKS, INDENTI-PLUGS, Economical Open-cell, 1.45 lb. uniform-density foam Breathable and non-absorbent Use over a wide temperature range Autoclavable Chemical resistant Proven safe for algae culturing Identi-Plugs® are…
-
Vacuum Traps, O-Rings, Airfree®, Schlenk
ChemglassTwo-piece vacuum trap with #15 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation when used with either the AF-0060 or AF-0061 manifolds. Trap body is 57mm OD x 300mm in length to be…
-
Strain relief molded into stopper at tubing exit areas to prevent kinking Manufactured, assembled and packaged in Class 7 cleanroom USP Class VI approved materials Animal Derived Component Free (ADCF) Gamma irradiated at 25kGY-40kGY Our single-use bottle…
-
Stoppers/Adapters, Extraction Nut, NPT
ChemglassPTFE stopper is similar to CG-3002-L but with the addition of one female NPT port in the center for connection of compression fittings or pressure/vacuum gauges. PTFE stopper has an extraction nut permitting easy removal of the stopper from the glass outer joint.
-
Dispenser packs of non-sterile syringes make sense. They're more economical and easier on the environment. Available in both luer slip and luer lock styles. Convenient dispenser cartons Reduced waste No wrappers to remove Require less storage space These all polypropylene…
-
Color Coded Chem Snap Caps
ChemglassChem Snap Caps™ may be snapped on and off by hand which eliminates the need for metal crimping and decapping tools, thus reducing potential hazards due to sharp aluminum edges. Large opening provides greater target area for needle penetration. These liner-less Chem Snap Caps™ are…
-
These round, wide mouth amber glass bottles are used for storage of light sensitive chemicals. The 50mL and 120mL bottles have a black phenolic cap with a polyethylene cone shaped liner. All other sizes have a white polypropylene cap with a polyethylene faced foam liner. Sold with cap attached to…
-
Solvent reservoir for use in HPLC mobile phase delivery. The 1000 mL size HPLC solvent bottles are a replacement for use with the Hewlett-Packard model HP-1090 HPLC (HP part number 9301-0656). Outer joint at the top on all sizes is polished, thereby making an excellent seal between the PTFE cap and…
-
Preassembled GPI 10-425 Septa Caps
ChemglassPre-assembled closure and septa minimize contamination from handling.
-
-
Funnels, Powder, Offset
ChemglassFunnel has a lower stem made with an offset to permit use with multi-neck flasks.
-
GL Caps with Aperture
ChemglassOpen top cap for use with GL screw threads. The cap combined with the CG-197 sealing ring will accommodate tubing of the listed diameter. Cap is made from PBT (thermoplastic polyester) and will withstand temperatures from -45 to 200°C.
-
Bonded closures feature clear PTFE/Silicone bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout. Closures are available in both pre-slit and non-slit designs
-
Spool Rack, Mobile
ChemglassRack is on casters making it easy to move from lab to lab. It will hold up to 6 each 13"; spools. With the rack being only 17"; wide it can fit into tight spaces between lab benches and hoods. Constructed of powder coated aluminum making the unit light and resistant to most lab…
-
Bottles, Aspirator, Graduated
ChemglassAspirator bottles with permanent white graduations. Useful as a reservoir for fermentation work or as a large scale animal feeder. Bottle has a reinforced tooled top to accept the listed size of rubber stopper. Hose connection has an O.D. of 9mm at the largest serration.
-
BioReaction
ChemglassSHAKER RACK FOR 50ML BIOREACTION TUBES, Stainless Steel Construction Angle Adjustment of up to 30° Silicone Gasket Holds Tube Securely Can be used with Skirted or Standard Tubes Fits All Shakers with a top plate of at least 14” x 14” Our unique 49…
-
Vented Caps
ChemglassBlue polypropylene vented cap has a 0.22µm PTFE hydrophobic membrane to allow gas exchange while preventing contamination. They are autoclavable at 121°C. Must be used with our 70mm silicone gasket
-
Bi-Metal Blue Magnetic Seals
ChemglassThe magnetic seals are for use with any instrument that transports the vial with the use of a magnet.
-
Bottles, Hybridization
ChemglassHeavy wall bottle used in hybridization incubators or ovens with rotators. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The membrane is saturated and drained during each revolution, resulting in even exposure of the…
-
Caps and Tubes
ChemglassNorell™ Standard NMR Tube Caps are made of low density polyethylene, and available in 3mm and 10mm. Premium Automated NMR Tubes ...an integral component of your spectrometer™.The C-UNI-5000 series NMR tubes are specifically made for today’s automated sample changers, where…
-
-