ZORBAX StableBond 300 C18, 4.6 x 12.5 mm, 5 µm, guard cartridge (ZCG) 4/pk. ZORBAX 300StableBond (300SB) columns are avilable in four different bonded phases for reversed-phase selectivity optimization of peptides and proteins. Agilent Technologies products are intended for…

PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives…

One Year Maintenance Kit (2714S21) Includes Big Universal Trap for He (1/8 in.), abrasive sheets (5/pk), lint-free cloths (15/pk), cotton swabs (100/pk), SantoVac Ultra, 18.5 ml (2 each), rough pump oil (1 liter), filament assembly, and Octafluoronapthalene (OFN) MSD Tool Kit (2713M85) includes…

Supplies kit includes the following: Jet, packed standard 0.018 in. ID tip FID performance evaluation sample Ignitor glow plug assembly, 2 each Jet, 0.011 in. ID tip, capillary adaptable, 3 each FID flow measuring insert, 2 each Cleaning wires for 0.03 in. ID jet, 5/pk Cleaning wire for…

PLgel Olexis GPC columns are optimized for the analysis of high-molecular weight polymers and high-temperature GPC analysis. Olexis columns are the industry standard for analysis of polyolefin, polyethylene, polypropylene, and high-performance polymers. Even at elevated temperatures, the PL Olexis…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Bond Elut CH is a midpolarity sorbent that exhibits unique selectivities for certain analytes. When employed as a nonpolar sorbent, CH has the approximate polarity of a C2 sorbent. Bond Elut CH is often a good choice when nonpolar sorbents, such as C18, C8, or C2, do not provide the desired…

Agilent Filament,high temperature EI for GCMS AA Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

FID performance evaluation sample kit (2713Y06) is used for the HP 5880, 5890 and 6890 with a FID or TCD. Solution of 0.033% C14, C15, and C16 normal alkanes in hexane. Three 0.5 ml ampules. Agilent Technologies products are intended for sale/shipment within the US only. International…

The Agilent Technologies accessory is used with integrators, which is essential to make secure, stable and reliable connections. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Extraction salts are pre-measured and provided in anhydrous packets, so you can conveniently add them after the acetonitrile and improve results Kits available with ceramic homogenizers to facilitate sample homogenization and to break up salt agglomerates more efficiently than shaking by hand;…

Equivalent to a (5%-Phenyl)-methylpolysiloxan Non-polar Specially processed to exhibit excellent inertness for EPA Semivolatiles Methods 625, 1625, 8270 and CLP protocols* Surpasses EPA performance criteria for semivolatiles Inert for base, neutral and acidic compounds High…

Brass body, dual stainless steel diaphragms These regulators and Agilent’s broad spectrum of in-line filters, combination traps, and gas purification systems are an excellent combination to plumb your systems. Agilent Technologies products are intended for sale/shipment within the US…

Collector Assembly (2714C86) Includes the Following: PTFE chimney Collector nut Spring washer, 10/pk Ignitor castle Ignitor glow plug assembly Upper collector insulator Collector body Lower collector insulator FID and TCD Sample: This sample is…

Agilent J&W CP-SimDist UltiMetal performs extended analysis to C120, and is guaranteed to a Tmax of 450 °C, due to the virtually unbreakable inert UltiMetal tubing. The internal diameter of UltiMetal tubing is the same as for fused silica 0.53 mm id (Megabore) columns, providing trouble-free…

(14%-Cyanopropyl-phenyl)-methylpolysiloxane Low/midpolarity Bonded and cross-linked Solvent rinsable Exact replacement for HP-1701 Similar Phases: DB-1701: SPB-1701, CP-Sil 19 CB, Rtx-1701, BP-10, OV-1701, 007-1701, ZB-170 Agilent Technologies products are intended for…

PLgel Olexis GPC columns are optimized for the analysis of high-molecular weight polymers and high-temperature GPC analysis. Olexis columns are the industry standard for analysis of polyolefin, polyethylene, polypropylene, and high-performance polymers. Even at elevated temperatures, the PL Olexis…

Virtually equivalent to a (35%-Phenyl)-methylpolysiloxane Midpolarity Very low bleed characteristics Extended temperature limit of 340/360°C Exhibits inertness to active compounds Suitable for confirmational analysis Bonded and cross-linked Solvent rinsable …

Use with all 8, 11 and 20 mm crimpt top vials and crimp caps Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.