Ace Glass, Condensers, Nucleic Acid
-
Condenser, Allihn-Kronbitter, No Hold-Up
Ace GlassWith surface of bulbs on one side and the other side flat to permit its use on an angle. With standard taper 24/40 inner and outer joints at top and bottom.
-
Condenser, Coiled
Ace GlassDouble jacketed with standard taper inner and outer joint at bottom and top.
-
Spiral Reflux Condenser
Ace GlassSpiral reflux condenser with inlet and outlet hose barbs located on the same side at the top of the condenser body for easy hose connections. These condensers are available in multiple lengths which allow for greater surface area dependant on the appli
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
Condenser, Dewar Type
Ace GlassDewar type condenser for use with dry ice or other solid cooling agents. Upper tube is 12mm O.D. At bottom is standard taper 24/40 inner joint.
-
Condenser, Reflux, Spiral
Ace GlassSpiral coil, reflux condenser with angled top outer joint and two equal side arms with size C hose connections.
-
Condenser, Coiled
Ace GlassCoiled condensing tube, with 24/40 inner and outer joint at bottom and top. Available in various lengths with hose barbs or Ace-Safe connectors.
-
Condenser, Liebig, No Hold Up
Ace GlassWith standard taper 24/40 outer joint at top. Jacket length 300 mm. Hose connections are size D.
-
Condenser, Liebig, No Hold Up
Ace GlassWith standard taper or spherical joint at bottom and top. Hose connections are size D.
-
Condenser, Friedrichs
Ace GlassReflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.
-
Sublimation Adapter, Adjustable
Ace GlassMicroscale sublimation adapter with vertically adjustable condenser tube that allows use with 3 mL, 5 mL, and 10 mL microscale vessels. Two-piece adapter features a #7 Ace-Thred at top of vacuum adapter that, with Nylon bushing and O-Ring, forms a compression seal with condenser tube, bottom 14/10…
-
Condenser, Friedrichs, Modified
Ace GlassTop of condenser modified with #7 Ace-Thred so inlet tube is removable. This offers easier cleaning and greater economy if inlet tube breaks. With molded spiral condensing surface and 24/40 joint at bottom and top. Jacket length 250mm. Available with h
-
Condenser, Long Path
Ace GlassTurbulent flow created makes this condenser very desirable for use under reduced pressure. Internal and external cooling surfaces result in high efficiency per unit length. Joints are standard taper 24/40.
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Condenser, Triple Coil, High Capacity
Ace GlassHigh through-put, high capacity triple coil condenser has even higher capacity than double coil or rotary evaporator type condensers. Unit is designed with three internal coils for processing large volumes of cooling water and large volumes of material
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Bulb type, approximately one bulb per 50 mm, with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing. For replacement connectors, see 5853.
-
Condenser, West
Ace GlassWith top joint jacketed for water cooling. Jacket length measured from bottom of top joint.
-
Condenser, West
Ace GlassNo Hold Up West condenser available with hose barbs or Ace-Safe connectors.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and joint at bottom and top. Jacket length 250mm. Available in various joint sizes with hose barbs or Ace-Safe connectors.
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.
-
Condenser, Graham
Ace GlassWith standard taper 24/40 outer joint at top. Hose connections are size D, for 3/8in ID tubing.
-
Used with Pressure Reactors, listed in Reaction Section. Heavy wall condenser has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15…
-
With water cooled standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and standard taper 24/40 inner joint at bottom. Top tubulation tooled to take No. 3 stopper. Jacket length 250mm. Hose connections are size D.
-
Condenser, High Capacity, Double Coil
Ace GlassHigh through-put, double coil condensers are designed to fit larger systems and pilot plant reactors. The design is similar to a rotary evaporator type condenser, where large volumes of material are being condensed at high temperatures and where large
-
Double-jacketed, with standard taper 24/40 inner and outer joint at bottom and top. Extra cooling capacity for volatile materials. Compact design retards diffusion. With #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for
-
Condenser, Pilot Plant
Ace GlassHighly efficient. May be used either for through condensation or refluxing. Internal baffling acts as impinging surface for entrained particles and discourages diffusion loss. Available with hose barbs or Ace-Safe connectors.
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Condenser, Cold Finger
Ace GlassCold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 con
-
Condenser, Spiral
Ace GlassWith spiral condensing tube having both inlet and outlet connections at top, on same side. With joints. Length between joints is approximately 80-90 mm longer than the stated coil length. Available with PTFE clad bottom joint.