Reagent, 1 L, Solutions
-
Ricca 20% (w/v) Copper Sulfate
Ricca ChemicalThe Ricca Chemical copper sulfate with a composition of 82.22% water and 17.78% copper sulfate pentahydrate, is suitable for use in fertilizer, metal, leather, ink and paint industrial applications. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 1% (w/v) Alcoholic Phenolphthalein TS/RS
Ricca ChemicalThe Ricca Chemical phenolphthalein TS/RS with a composition of 94.05% ethyl alcohol, 4.70% methyl alcohol and 1.25% phenolphthalein, is suitable for use in medical applications. It can be used as a reductometric standard in titrations. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 20% (v/v) Hydrochloric Acid
Ricca ChemicalHydrochloric Acid is a strong acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using a pH indicator. The selection of the indicator used depends…
-
Ricca 10% (w/v) Chromic Acid
Ricca ChemicalThe Ricca Chemical chromic acid with a composition of 90.66% water and 9.34% chromium (VI) oxide, is suitable for use in cleaning laboratory glassware and anticorrosive metal treatment industries. It can be stored at a temperature of 15 to 30 degree C.
-
Total ionic strength adjustment buffer (TISAB) is a buffer solution which increases the ionic strength of a solution to a relatively high level. This is important for potentiometric measurements, including ion selective electrodes, because they measure the activity of the analyte rather than its concentration.
-
Ricca 16.7% (v/v) Electronic Grade Ammonium Hydroxide
Ricca ChemicalThe Ricca Chemical ammonium hydroxide with a composition of 95.75% water and 4.25% ammonium hydroxide, is commonly used as a detergent, stain remover, bleaching agent. This chemical is best suited for qualitative inorganic analysis. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 5% (w/v) Trichloroacetic Acid
Ricca ChemicalAcetic Acid is a weak acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using an indicator that changes color in the pH range 8.0 - 10. Thymol Blue…
-
Ricca 2% (w/v) Potassium Iodide
Ricca ChemicalPotassium iodide is a chemical compound, medication, and dietary supplement. It is a medication used for treating hyperthyroidism, in radiation emergencies, and for protecting the thyroid gland when certain types of radiopharmaceuticals are used.
-
Ricca 30% (w/v) Potassium Hydroxide
Ricca ChemicalPotassium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 10% (w/v) Ferric Chloride
Ricca ChemicalIron(III) chloride is the inorganic compound with the formula FeCl3. Also called ferric chloride, it is a common compound of iron in the +3 oxidation state. The anhydrous compound is a crystalline solid with a melting point of 307.6 °C. The color depends on the viewing angle: by reflected light the…
-
Ricca 10% (w/v) Ammonium Chloride
Ricca ChemicalThe Ricca Chemical ammonium chloride is formed as a by-product of sodium carbonate and is used as an electrolyte in dry cells. The daily uses of this compound involves galvanizing, tinning and soldering of fluxes to eke out oxide coatings from metallic surfaces.
-
Ricca 8% (w/v) Ferric Ammonium Sulfate TS
Ricca ChemicalThe Ricca Chemical ferric ammonium sulfate with a composition of 92.73% water and 7.27% ferric ammonium sulfate dodecahydrate, is suitable for use in medicine, chemical analysis and metallurgy. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 5% (w/v) Potassium Iodide
Ricca ChemicalPotassium iodide is a chemical compound, medication, and dietary supplement. It is a medication used for treating hyperthyroidism, in radiation emergencies, and for protecting the thyroid gland when certain types of radiopharmaceuticals are used.
-
Ricca Electrode Cleaning Solution
Ricca ChemicalElectrode cleaning solution for removal of membrane/junction protein deposits. Application: For Removal of Membrane/Junction Protein Deposits
-
Ricca 9% w/v Sodium Chloride
Ricca ChemicalSodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
-
-
-
-
Synthetic Fresh Water, Hard
Ricca Chemical415 ppm TDS as Fresh Water Ions, 160 - 180 mg/L Hardness as CaCO3
-
Ricca Copper Sulfate
Ricca ChemicalThe minimum requirement of the American Association of Blood Banks (AABB) and the Food and Drug Administration (FDA) for suitable blood donors is 12.5 g/dL hemoglobin level or 38% packed cell volume (hematocrit) for fingerstick or venipuncture sampling methods. Copper Sulfate Solution, Specific…
-
The Ricca Chemical phenolphthalein indicator with a composition of 61.91% ethyl alcohol, 33.82% water, 3.09% methyl alcohol, 1.18% phenolphthalein, is suitable for use in acid-base titrations. It can be stored at a temperature of 15 to 30 degree C.
-
Synthetic Fresh Water, Moderately Hard
Ricca Chemical207 ppm TDS as Fresh Water Ions, 80 - 100 mg/L Hardness as CaCO3
-
Ricca Analytical Reagent Grade 40% (w/w) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca Exton Qualitative Reagent
Ricca ChemicalThe Ricca Chemical exton qualitative reagent with a composition of 90.00% water, 5.00% sodium sulfate anhydrous and 5.00% 5-sulfosalicylic acid dihydrate, is suitable for testing albumin in urine. It can be stored at a temperature of 15 to 30 degree C. Application: For the Qualitative Detection of…
-
Ricca Doctor Solution (Sodium Plumbite)
Ricca ChemicalThe sodium plumbite solution used in the industry is commonly referred to as doctor solution and consists principally of a solution of lead oxide, caustic soda and water in varying proportions according to the result desired. In the process of sweetening petroleum prod ucts it is usually necessary…
-
Ricca 0.01 N Silver Nitrate
Ricca ChemicalSilver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.
-
Ricca Biuret Reagent TS
Ricca ChemicalBiuret Reagent TS, (U.S.P. Test Solution) is a solution, sometimes designated with "TS or Test Solution", that is prepared according to the specifications of the USP Pharmacopeial Convention, for the purpose of conducting USP and National Formulary tests and assays.
-
-
Ricca Iodine & Potassium Iodide TS 1
Ricca ChemicalThe Ricca Chemical iodine and potassium iodide TS 1 with a composition of 92.31% water, 5.77% potassium iodide and 1.92% iodine, is suitable for use in various laboratory tests. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 20% (w/w) Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Ricca 10% (w/v) Copper Sulfate
Ricca ChemicalThe Ricca Chemical copper sulfate with a composition of 90.60% water and 9.40% copper sulfate pentahydrate, is suitable for use in fertilizer, metal, leather, ink and paint industrial applications. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 10% (w/v) (100 g/L) Silver Nitrate
Ricca ChemicalThe Ricca Chemical silver nitrate with a composition of 90.78% water and 9.22% silver nitrate, is used to treat skin infections of wounds and burns. It can be stored at a temperature of 15 to 30 degree C.