Reagent, Ricca Chemical, Chemicals
-
Ricca 0.300 Normal Hydrochloric Acid
Ricca ChemicalHydrochloric Acid is a strong acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using a pH indicator. The selection of the indicator used depends…
-
Ricca Brucine-Sulfanilic Acid Solution
Ricca ChemicalThe Ricca Chemical brucine-sulfanilic acid solution with a composition of 97.64% water, 1.28% hydrochloric acid, 0.98% brucine sulfate heptahydrate and 0.10% sulfanilic acid, is suitable for use in nitrate analysis. It can be stored at a temperature of 15 to 30 degree C. Application: For Nitrate Analysis
-
Ricca 5% (v/v) Hydrochloric Acid
Ricca ChemicalHydrochloric Acid is a strong acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using a pH indicator. The selection of the indicator used depends…
-
Ricca 1 Normal Nitric Acid
Ricca ChemicalNitric acid is the inorganic compound with the formula HNO3. It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water.
-
-
Ricca Surface Cleaning Solutions
Ricca ChemicalThis product is intended for laboratory cleaning and disinfection purposes and is typically used for disinfection of surfaces. All components of this product are filtered as part of the manufacturing process. The residue after evaporation is typically 0.001% (10 ppm) maximum at the time of…
-
Ricca 0.05 Normal (N/20) Hydrochloric Acid
Ricca ChemicalHydrochloric Acid is a strong acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using a pH indicator. The selection of the indicator used depends…
-
Ricca 0.282 Normal, 1 mL = 10 mg Cl? Mercuric Nitrate
Ricca ChemicalThe Ricca Chemical 0.282 normal mercuric nitrate with a composition of 93.47% water, 4.88% mercuric nitrate monohydrate and 1.65% nitric acid, is normally used in chloride determination. It acts as a oxidizing agent when reacted with other chemicals. It can be stored at a temperature of 15 to 30…
-
Ricca 6 Normal Acetic Acid
Ricca ChemicalAcetic Acid is a weak acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using an indicator that changes color in the pH range 8.0 - 10. Thymol Blue…
-
Ricca Phosphoric Acid
Ricca ChemicalThe Ricca Chemical 50% v/v phosphoric acid is a very useful chemical compound that is used for a variety of products including fertilizers, detergents and other household cleaning products. It can alsi be used as a food preservative in soft drinks and processed food.
-
Ricca 1 Normal Sodium Thiosulfate
Ricca ChemicalSodium thiosulfate is an inorganic compound with the formula Na2S2O3·xH2O. Typically it is available as the white or colorless pentahydrate, Na2S2O3·5H2O. The solid is an efflorescent crystalline substance that dissolves well in water.
-
Ricca Picric Acid
Ricca ChemicalThe Ricca Chemicals picric acid is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Safety in Transportation, Picric Acid Is Usually Mixed Witha Minimum…
-
Iodine, 0.025N
Ricca ChemicalFormula: I Formula Weight: 126.90 CAS Number: 7553-56-2 Synonym(s): N/A
-
Ricca Iodobromide TS
Ricca ChemicalThe Ricca Chemical iodobromide TS can be assayed with the help of a strong acid and can be used as a strong base for chemical ionization.
-
Ricca Barium Chloride
Ricca ChemicalThe Ricca Chemical barium chloride with a composition of 78.70% water and 21.30% barium chloride dihydrate, is suitable for use as a general laboratory reagent. It can be stored at a temperature of 15 to 30 degree C.
-
-
-
Ricca Orthophenanthroline TS
Ricca ChemicalThe Ricca Chemical orthophenanthroline TS acts as a chelating agent that is used on metals to avoid the entry of chromosomal aberrations in streptozotocin-treated cells.
-
Ricca Dibutylamine
Ricca ChemicalThe Ricca Chemical dibutylamine is flammable and toxic in nature and acts as a corrosion inhibitor and a floatation agent in the production of emulsifiers.
-
Ricca Cupric Citrate TS
Ricca ChemicalThe Ricca Chemical cupric citrate TS is mainly used in the conduction of USP, National Formulary and assay tests and is formulated according to the standards of USP pharmacopeial convention.
-
Ammonium Molybdate TS
Ricca ChemicalWe offer a broad range of USP (United States Pharmacopeia) and multicompendial (USP/EP) solutions and test reagents. Our product line - the most extensive available - makes it easy for you to select and order the products you need. Our FDA-registered and inspected facilities, cGMP compliant…
-
Ricca 200 ppm Fe Iron Standard
Ricca ChemicalThe Ricca Chemical iron standard is perfect for the analysis and detection of various liquids samples in chemical laboratories.
-
Ricca Potassium Arsenite
Ricca ChemicalThe Ricca Chemical potassium arsenite with composition of 99.01% water, 0.40% potassium bicarbonate, 0.37% arsenic trioxide and 0.23% potassium hydroxide is mainly used in treatment of various diseases. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 10% (w/v) (100 g/L) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 0.3125 Normal Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 0.05882 Normal (N/17) Hydrochloric Acid
Ricca ChemicalHydrochloric Acid is a strong acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using a pH indicator. The selection of the indicator used depends…
-
Boric Acid, 4%
Ricca Chemical(w/v) Aqueous Solution with Bromocresol Green-Methyl Red Indicator, for Kjeldahl Nitrogen Analysis Formula: H3BO3 Formula Weight: N/A CAS Number: 10043-35-3
-
The Ricca Chemical ferroin indicator with a composition of 97.84% water, 1.47% 1, 10-phenanthroline monohydrate and 0.69% ferrous sulfate heptahydrate, is suitable for use in analytical chemistry. It is also used in wastewater analysis. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 0.125 Normal (N/8) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 32% (w/v) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca Sodium Hypochlorite Solution
Ricca ChemicalThe Ricca Chemical sodium hypochlorite solution with a composition of 94% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca Acetate Buffer Solution
Ricca ChemicalThe Ricca Chemical acetate buffer solution with a composition of 65.80% water, 23.81% ammonium acetate and 10.40% hydrochloric acid, is suitable for use in biochemical and molecular biology laboratories. It can be stored at a temperature of 15 to 30 degree C.