High precision, universal fit for use with pipettes from other manufacturers Soft, flexible tip cone ensures better pipette tip sealing Fine graduations make it easy to visually check volume Ergonomically optimized cone geometry ensures perfect fit on Eppendorf pipettes New tip…

Enhance the performance of your Perkin-Elmer CCS workstation with BioRobotix tips. One group is designed for the PlateTrak, MiniTrak and Evolution P-3, these tips offer precision dispensing for multi-dispensing assays. Tips are available in 20, 50 and 235 µL volumes and in sterile,…

Access tips with one hand using Thermo Scientific™ ART™ Nonfiltered Hinged Rack Pipette Tips, which is designed for the way you work. No longer worry about your tips spilling on your bench or floor. Maximize your productivity and easily transition from hinged to lift-off in just three easy steps.…

Robotic tips and non-conductive tips are designed for use in Robotic pipetting systems and can be used in various liquid handing workstations, such as those produced by BECKMAN, Tecan and Agilent. They can also be applied to cytomics, genomics, proteomics, immunoassay, metabonomics and the R & D of…

Robotic tips and non-conductive tips are designed for use in Robotic pipetting systems and can be used in various liquid handing workstations, such as those produced by BECKMAN, Tecan and Agilent. They can also be applied to cytomics, genomics, proteomics, immunoassay, metabonomics and the R & D of…

Labcon Eclipse™ Pre-siliconized pipet tips for use with viscous samples. These tips offer very low surface tension. Every lot is lab tested and certified free of detectable Nuclease (Rnase/Dnase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for…

Axygen® offers a comprehensive line of tips for Agilent®/Velocity11 automation systems. The VT-384 Series tips are available in our proprietary low retention; Maxymum Recovery® technology in nonsterile, sterile and filtered and non-filtered formats. Clear polypropylene tips are…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

Configure Thermo Scientific™ ART™ Nonfiltered Lift Off Racks and Bulk Pipette Tips with Rainin™ LiteTouch™ Pipettes.

Hanging Rack, Certified RNase, DNase and Pyrogenic Free, Compatible with Tecan Genesis Freedom, Freedom EVO and Aurora Biomed Versa w/8 Channel Head.

Fits Perkin-Elmer/Packard Multiprobe II HT and Multiprobe II HT EX with Hanging Tips Multiprobe hanging tips are designed specifically for the Multiprobe II HT ensuring a superior fit. Offered in clear or liquid sensing versions.

Fits Beckman Biomek FX/NX With a Span-8 Head Liquid Sensing Span 8 for the Biomek FX Make the most of the FX’s liquid sensing capabilities with 20 and 250 µL tips

Disposable Polypropylene Reference Tips™ for Eppendorf®, Excalibur®, Finnipette® and Pipetman™ Made of translucent white polypropylene with graduations permitting visual confirmation of volume pipetted. 7740K15 and K50 tips have volume range 1-250 µL with graduation…

Tecan TEMO tips have been certified for use on the Tecan TEMO workstation. The TEMO can be a stand-alone workstation (Tecan Aquarius) or used as a second head on the Tecan Genesis. Tips fit Tecan Temo and Tecan Aquarius.

MBP is the exclusive manufacturer of the 96-well format Caliper Automation Certified Pipet Tips. Tips are manufactured to exacting specifications. Racks provide the sturdiness required by automation equipment and tips are designed with exceptional straightness. All tips are certified DNase and…

Advanced molding process prevents flash around tip and a perfectly centered opening Smooth uniform surface Convenient packaging Color-coded Fully autoclavable Optimal design with a smooth, clear, hydrophobic surface ensures complete sample dispensing and minimal liquid…

Fit all major brand pipettors Two sizes: 200 or 1000 µL Certified RNase-, DNase-free and non-pyrogenic Easy stacking racks Autoclavable Corning® Universal Fit Hinged Rack Pipet Tips are designed to assure a reliable fit with all major brand pipettors. Tips are available in two sizes: 200 µL…

Ensure a secure seal for every sample. Thermo Scientific™ ClipTip™ Pipette Tips provide a secure seal for every sample with a unique and innovative interlocking technology that ensures a complete seal on every channel with minimal tip attachment and ejection force. Achieve newfound…

Robotic tips and non-conductive tips are designed for use in Robotic pipetting systems and can be used in various liquid handing workstations, such as those produced by BECKMAN, Tecan and Agilent. They can also be applied to cytomics, genomics, proteomics, immunoassay, metabonomics and the R & D of…

Ensure a better seal with the pipetter module, for higher accuracy and precision. The Thermo Scientific™ Finntip™ Flex™ Pipette Tips reduce the amount of force needed to attach and eject tips, significantly lowering the risk of repetitive stress injury (RSI). Excellent for…

BioRobotix pipet tips help you get more out of your Tecan workstation. 20 µL and 50 µL liquid-sensing and clean Tecan tips increase the precision of low volume pipetting by minimizing dead air volume within the tip. All Tecan tips come in a hermetically sealed blister pack. These…

The Eppendorf Maxitip are tailored to different vessels. Select the right Eppendorf Maxitip which meets your needs. The Eppendorf Maxitip P is designed for aspirating 1 mL to 10 mL, for example from beakers. The Eppendorf Maxitip S for 2.5 mL to 10 mL forms a system with the Maxitip and is used for…

Corning® polypropylene microvolume pipet tips provide accurate, reliable performance in the 0.5-10µL range and are designed for use with Eppendorf® and other popular ultra-micropipettors. Please check our Technical Information Listing on our Pipet Tip Compatibility Guide for…

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lower the risk of RSI. It also ensures a…

Robotic tips and non-conductive tips are designed for use in Robotic pipetting systems and can be used in various liquid handing workstations, such as those produced by BECKMAN, Tecan and Agilent. They can also be applied to cytomics, genomics, proteomics, immunoassay, metabonomics and the R & D of…

Ensure a secure seal for every sample. Thermo Scientific™ ClipTip™ Pipette Tips provide a secure seal for every sample with a unique and innovative interlocking technology that ensures a complete seal on every channel with minimal tip attachment and ejection force. Achieve newfound…

Guaranteed tip purity for increased precision and accuracy Rigid rack design Precision MBP molding Certified RNase, DNase, DNA pyrogen-free Fits a variety of automated workstations 384-well tip design ensures precise pipetting for volumes of 30 µL or less. Manufactured using non-wettable…

Clear versions of Tecan tips are designed for researchers not using the conductive features of their platforms or requiring visual confirmation of their pipetting. These crystal clear tips are available in four sizes, sterile or non-sterile and with or without the ART barrier. Tips fit Tecan…

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Wide bore tips are for working with genomic DNA, fragile cell lines and other viscous materials. With a distal end orifice…

Proprietary manufacturing technology enables creation of a more hydrophobic tip that allows users to pipet viscous samples, load dyes, surfactants and solvents with greater accuracy. Less sample is retained within the tip which decreases the amount of reagent loss while significantly increasing the…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…