Available in clear or amber borosilicate glass. Choice of closure and linter, including patented Top Hat™ liner system. Fixed (bonded) closures eliminate liner fallout.

Large opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…

Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial. Tight fit offers good sealability. The 15mm Snap Plug has a pre-scored starburst to…

Glass Insert/Plastic Outside Vials are a combination of Type I low extractable borosilicate glass inserts and clear or amber thermoplastic polymer outer vial shells. Only the glass contacts the sample and the seal. Item No. 302511CP-12 The new Finneran 4-Fin Polypropylene 11mm Crimp/Snap…

For Agilent 7673 and 1100 Series Autosamplers Wide cap profile for rotating or robotic arm autosampler trays 40% wider opening 33 expansion glass (Type I Class A) Borosilicate glass Convenience of a screw cap vial with the integrity of a crimp vial, I-D™ vials have…

Conical Inserts with Polymer Feet Microvolume inserts transform vials from full-capacity to limited volume with one simple step. The inserts featured here are compatible with 8-425 screw top vials. Conical Inserts with Polymer Feet (2714S18) Polymer feet act as the inserts' shock absorber to…

Designed to work in most standard autosamplers. Finneran polypropylene vials are lightweight, economical and have good chemical resistance. These limited volume vials provides maximum retrieval of contents. 12x32mm, 8-425mm Thread Choice of materials: Polypropylene is translucent,…

Narrow neck vial w/8-425 thread finish High quality 33 expansion borosilicate glass or amber 51A glass Uniformly flat bottom for security with inserts I-D™ vials feature write-on patch with graduations at 0.5, 1.0 and 1.5mL Glastic vial features a glass insert pre-inserted…

Large opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…

For wide opening vials For use with screw caps Also called “red rubber” Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent…

Provides a consistent seal independent of user, or the amount of torque applied when closing vial Provides optimal septum compression across the opening of the vial Design allows the positioning of the closure to be consistently “flat” producing a more cylindrical vial profile, which improves…

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

The Finneran snap cap and seal are used with vials to ensure tight sealing of the stored sample. They is mainly used in research laboratories or in chemical industries. They are made of sturdy material which ensures long lasting usage and durability.

Snap Seal vials can accept aluminum crimp seals or Snap Top Caps. 2701H01 through H22 are aluminum seals, 13 mm with Septa; 2701H25 through H58 are Snap Top Caps, 13 mm with Septa. 2701H61 through H82 fit Shimadzu autosamplers.

Standard opening screw thread vials - 12 x 32 Type I borosilicate glass Clear or amber With or without marking areas Narrow opening allows use of 8-425 mm closures and septa. Designed to work in a variety of autosamplers. Marking areas make labeling and identification fast…

For use with 12 x 32 mm crimp top vials Septa included Larger opening Variety of colors Increased target area for needles helps prevent breakage. Allows color coding for easy sample identification. Our 11mm aluminum seals and snap caps are available assembled with a…

Easy to use No tools required Twist of the cap produces an evaporation-proof seal. Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Choose a septa best suited for your application. For customers…

4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for…

F217 is a triple layer liner that consists of a foamed polyethylene core between two layers of virgin low-density polyethylene. The liner is faced with another layer of PTFE (polytetrafluoroethylene). The lined polypropylene closures have excellent chemical resistance, a low moisture transmission…

Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial while still providing a tight fit for good sealability.

J.G. Finneran Associates designed Limited Volume Inserts with and without Bottom Springs to ensure that autosamplers extract even the smallest sample volumes every time, without damaging injection needles or breaking sample containers. The inserts preassembled with polymer bottom springs act…

11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Pre-assembled Convenience Packs Components packaged in a tray that fits into bench drawer for easy access. Packaging keeps products visible and particle free. Pre-assembled. Packs come ready-to-use.

Transform Agilent vials from full-capacity to limited volume with one simple step. Inserts are compatible with Agilent wide opening screw top, crimp top and snap top vials. Conical Inserts with Polymer Feet (2714M52, N29, N42) With the correct default setting on an autosampler, these inserts…

Black polypropylene vials protects against light sensitive samples from having a chemical reaction during sampling, testing, storage or transporting. The polypropylene provides added safety by eliminating breakage.

Available in clear or amber Type I borosilicate glass or polypropylene. Glass vials feature heavier walls for safer handling. Available with marking spots.

Open-top closure

Agilent provides a wide variety of micro and 2 ml vials and caps compatible with the Combi Pal and GC Pal listed in the Vials and Caps section. Below are the most popular vials and caps. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

Clear and amber dram sample vials are made of Type I borosilicate glass, providing excellent resistance to heat shock and chemical leaching. Finneran dram vials are available assembled with screw thread closures PTFE/F217 lined or PTFE/Silicone lined.

12 x 32 Crimp Top Vials Type I Borosilicate Glass Clear or Amber 40% larger opening Increased target area helps prevent broken needles. Designed to work in Agilent (HP) and other autosamplers. Vial incorporates the unique StepVial design that precisely centers a limited…

Preassembled aluminum seals reduce contamination during sample preparation and save valuable time in the lab.