Supplies, Bottle, Plastic
-
Oxalic Acid, Dihydrate, ACS Reagent
GFS ChemicalsOxalic acid is an organic compound with the formula C2H2O4. It is a white crystalline solid that forms a colorless solution in water. The Oxalic Acid Dihydrate formula is (COOH)2•2H20. Its acid strength is much greater than that of acetic acid. Oxalic Acid dihydrate has a molecular mass of 126.07…
-
Chloramine T Sodium Salt Trihydrate
MP BiomedicalsChloramine T Sodium Salt Trihydrate is a reagent for selective oxidation of methionine. It is used as an antibacterial agent; a topical antiseptic. Capable of oxidative cyclization to produce various heterocycles. Nitrene source for aziridinations and aminohydroxylations. Reactant for Preparation…
-
OmniTrace® Nitric Acid
MilliporeSigmaFormula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2 Synonym(s): Hydrogen Nitrate; Azotic Acid
-
Butterfield’s Phosphate Buffer (BPB)
Edge BiologicalsButterfield’s Phosphate Buffer (BPB) is used in many procedures for detection of pathogenic microorganisms from food and environmental sources. The BPB is routinely the initial diluent for the raw specimen to be tested. AOAC recommends BPB as the
-
Hach products are intended for sale/shipment within the US only. International customers should contact their local Hach distributor to place orders for Hach products.
-
Phosphoric acid solution, 85 wt. % in water
BeanTown ChemicalCAS: 7664-38-2 EC No: 231-633-2 MDL No: MFCD00011340 RTECS: TB6300000 UN No: UN1805; Haz Class: 8; Packing Group: III Liquid Linear Formula: H3PO4 MW: 98.00 Melting Point: 19-21° Density (g/mL): 1.685 Refractive Index: 1.431
-
MicroCare Acetone
MicroCare CorpAcetone; standard industrial-strength solvent. Highly effective on glues and inks, some fluxes, pastes, oils and grease. Pronounced aroma. Good toxicity ratings
-
Buffered Peptone Water
Edge BiologicalsBuffered Peptone Water is used for pre-enrichment of damaged Salmonella species from food specimens to increase recovery.
-
Suprapur® Hydrofluoric Acid 40%
MilliporeSigmaSynonyms: Hydrofluoric acid solution, Fluoric acid HS Code: 2811 11 00
-
Hydrochloric acid solution, volumetric, 0.1N in water
BeanTown ChemicalCAS: 7647-01-0 EC No: 231-595-7 MDL No: MFCD00011324 RTECS: MW4025000 Liquid Molecular Formula: HCl MW: 36.46 Density (g/mL): 1
-
Sterile, ready-to-use 70% isopropyl alcohol (IPA) solution designed especially for cleanroom use. Made with Water-For-Injection (WFI), filtered to 0.2 µm, individually double-bagged and gamma-irradiated to ensure sterility. Made according to USP specifications and packaged in a Class 100…
-
Sorbic acid, 99%
BeanTown ChemicalCAS: 110-44-1 EC No: 203-768-7 MDL No: MFCD00002703 RTECS: WG2100000 Crystalline Molecular Formula: C6H8O2 MW: 112.13 Melting Point: 132-135° Boiling Point: 170° (decomposes) Flash Point: 127°C (261°F) Density (g/mL): 1.2
-
Ammonium peroxydisulfate, 98%
BeanTown ChemicalCAS: 7727-54-0 EC No: 231-786-5 MDL No: MFCD00003390 RTECS: SE0350000 UN No: UN1444; Haz Class: 5.1; Packing Group: III Powder Linear Formula: (NH4)2S2O8 MW: 228.20
-
Obliterase
Innovating ScienceUse Innovating Science’s Obliterase to eliminate RNase, DNase, and DNA contamination. Use on glass, plastics, and stainless steel Decontaminate beakers, flasks, pipettes, and tubes Residue free Phosphate free/biodegradable Directions: Use full strength, do not dilute. Wet item…
-
Bath Fluid
labForce® (powered by Thomas Scientific)Silicone bath fluid Superior heat transfer medium in melting point baths, etc. High thermal and chemical stability This clear, colorless, oily liquid has a nominal viscosity of 50 centistokes at 25°C, with a viscosity/ temperature coefficient of 0.59. The boiling point is over 360°C with a…
-
-
Polyvinylpyrrolidone
MP BiomedicalsPolyvinylpyrrolidone is a water-soluble polymer made from the monomer N-vinylpyrrolidone. Typically used as thickeners, dispersing agents, detoxicant, complexing agent, lubricants and binders. Polyvinylpyrrolidone is used as an emulsifier and disintegrant for solution polymerization; also for…
-
Lactic acid solution, volumetric, 1.0N in water
BeanTown ChemicalCAS: 50-21-5 EC No: 200-018-0 MDL No: MFCD00004520 Liquid Molecular Formula: C3H6O3 MW: 90.08
-
Cholic acid, 98%
BeanTown ChemicalCAS: 81-25-4 EC No: 201-337-8 MDL No: MFCD00003672 RTECS: FZ9350000 Powder Molecular Formula: C24H40O5 MW: 408.57 Melting Point: 200-201°
-
Ammonium perchlorate
BeanTown ChemicalCAS: 7790-98-9 EC No: 232-235-1 MDL No: MFCD00011421 UN No: UN1442; Haz Class: 5.1; Packing Group: II Crystalline Linear Formula: NH4ClO4 MW: 117.49 Density (g/mL): 1.95
-
Propylene Glycol
MP BiomedicalsPropylene glycol is a clear, colorless and hygroscopic liquid. Propylene glycol contains an asymmetrical carbon atom, so it exists in two stereoisomers. The freezing point of water is depressed when mixed with propylene glycol due to increased opportunity for hydrogen bonding. Propylene glycol…
-
Hardness 1 Buffer for hardness titrations with a pH 10.1 ± 0.1 at 20°C. Contains a solution of 2-amino-2-methyl-1-propanol packaged in a medicine dropper bottle (MDB) Hach products are intended for sale/shipment within the US only. International customers should contact their local Hach…
-
Ammonium bromide, 99%
BeanTown ChemicalCAS: 12124-97-9 EC No: 235-183-8 MDL No: MFCD00011419 RTECS: BO9155000 Solid Linear Formula: NH4Br MW: 97.94 Melting Point: 452° Density (g/mL): 2.43
-
Titriplex® V
MilliporeSigmaHill Formula C14H23N3O10 HS Code 2922 49 85 EC number 200-652-8 Molar mass 393.34 g/mol CAS number 67-43-6
-
Ethylene glycol-O,O'-bis(2-aminoethyl)-N,N,N',N'-tetraacetic acid, 97%
BeanTown ChemicalCAS: 67-42-5 EC No: 200-651-2 MDL No: MFCD00004291 RTECS: AH3760000 Powder Molecular Formula: C14H24N2O10 MW: 380.35 Melting Point: 241° (decomposes)
-
Oxalic acid, anhydrous, 98%
BeanTown ChemicalCAS: 144-62-7 EC No: 205-634-3 MDL No: MFCD00002573 RTECS: RO2450000 UN No: UN3261; Haz Class: 8; Packing Group: III Crystalline Molecular Formula: C2H2O4 MW: 90.04 Melting Point: 190° (decomposes) Boiling Point: 157° (sublimes) …
-
Sterile 70% Isopropyl Alcohol Cleanroom Packaged
ITW TexwipeSterile 70% Isopropanol Alcohol contains 70% by volume USP-grade Isopropanol (isopropyl alcohol) and 30% USP-purified water. Features: Made with USP-grade Isopropanol Filtered through 0.22 micron filter Gamma-irradiated to a sterility level of 10-6 Double-bagged in solvent-safe…
-
Pyridine-2,6-dicarboxylic acid, 98%
BeanTown ChemicalCAS: 499-83-2 EC No: 207-894-3 MDL No: MFCD00006299 Crystalline Molecular Formula: C7H5NO4 MW: 167.12 Melting Point: 248-250° (decomposes) Flash Point: 188°C (370°F)
-
EMSURE® Potassium Hydroxide Pellets for Analysis
MilliporeSigmaCAS: 1310-58-3 EC Number: 215-181-3 KOH 56.11 g/mol
-
Tannic acid
BeanTown ChemicalCAS: 1401-55-4 EC No: 215-753-2 MDL No: MFCD00066397 RTECS: WW5075000 Solid Molecular Formula: C76H52O46 MW: 1701.20 Melting Point: 218° Flash Point: 199°C (390°F)
-
2-(4-Chloro-3-nitrobenzoyl)benzoic acid, 98%
BeanTown ChemicalCAS: 85-54-1 EC No: 201-613-8 MDL No: MFCD00007082 Powder Molecular Formula: C14H7ClNO5 MW: 305.67 Melting Point: 198-201°
-
PAN Indicator Solution 0.1% Colorimetric Reagent for low level Manganese Determinations Bottle/100 mL Hach products are intended for sale/shipment within the US only. International customers should contact their local Hach distributor to place orders for Hach products.