Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…

The Agilent Technologies O-ring is mainly used in chemical laboratories and clinics. This O-ring is useful for sealing any manifolds and valves for the purpose of preventing any leakages of liquid chemical samples. This product is only available to U.S. Domestic Customers. For research use…

Agilent TOP-DNA removes interfering salts, incomplete synthesis products, and other impurities from synthetic DNA oligonucleotides in a few simple steps. TOP-DNA purifies oligonucleotides of up to 150-mer in length and from 200 nmol to 1 µmol. It can also be used for sample preparation before HPLC…

Agilent Full Flow Filters are made of either ultrahigh molecular weight polyethylene (UHMWPE) or the polyvinylidene fluoride (PVDF). These dissolution cannula filters are relatively inert and can be used for different sample matrices. PVDF cannula filters are available in those instances where…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Sample Introduction Pump System (SIPS) is an innovative sample introduction and dilution system for flame AA. SIPS eliminates the task of manual preparation of multiple calibration standards, providing fast, accurate online dilution of over-range samples. Application: For Agilent SIPS 10/20 …

Graphite shrouds for graphite furnace Atomic Absorption. Regular replacement of the shroud is recommended. A shroud in good condition will help ensure optimum performance and maximize tube life. Application: For Agilent GTA 95/96/97/100/110 This product is only available to U.S. Domestic…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The paddle over disk assembly is used for the dissolution testing of transdermal patches, is offered in a variety of sizes, and is used with a standard dissolution apparatus. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid, or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or…

Sampling and manifold replacement tubing and tubing kits are available to connect an Agilent dissolution tester to a sampling instrument such as the 850-DS dissolution sampling station. These tubings should be replaced on a regular basis. Application: For Bio-Dis & 8000 Sampling Station Female…

Several reciprocating vessel screens are available for the Agilent BIO-DIS reciprocating cylinder apparatus, which is ideal for automatic dissolution testing of dosage forms that require different types of media. This product is only available to U.S. Domestic Customers. For research use…

For 6120 VL+, 6130 SL, 6140 SL-HT. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

UltrAA lamps are high-intensity, boosted discharge hollow cathode lamps. They use the standard lamp current, but apply an additional boost discharge within the lamp. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their…

Agilent provides a range of supplies for the PSD 100/120 programmable sample Dispenser used with Agilent GFAAS systems, including sample vials, beakers, adapters, dispensing capillary assemblies, dispensing syringe and replacement plungers. This product is only available to U.S. Domestic…

Cannula filters are a type of dissolution filters that fit on the end of dissolution cannulas and provide filtration when sampling occurs. Agilent Full Flow Filters, where the whole construction of the dissolution cannula filter is made from filter material, offer an increased surface area for…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Sampling and manifold replacement tubing and tubing kits are available to connect an Agilent dissolution tester to a sampling instrument such as the 850-DS dissolution sampling station. These tubings should be replaced on a regular basis. Application: For 708-DS Sample and Return Cannulas …

The Sample Introduction Pump System (SIPS) is an innovative sample introduction and dilution system for flame AA. SIPS eliminates the task of manual preparation of multiple calibration standards, providing fast, accurate online dilution of over-range samples. Application: For SIPS 10/20, to Seal…

In paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies modified contact cylinder is a perfect accessory for any THGA graphite furnace systems. Application: For THGA Graphite Furnace Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other…

The Agilent Technologies 20-port collection rack offers good storage options to keep test tubes organized.is compatible to use with 10 x 75 mm test tubes and VacElut 20 cartridge manifolds. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

The Agilent Technologies replacement lid gasket provides a leak-proof seal to neatly store the liquid chemical samples thus preventing evaporation. It also helps in keeping the samples stable for a long period of time. This product is only available to U.S. Domestic Customers. For research…

The Agilent sampling probe is equivalent to the PerkinElmer AA version and is suitable for use with PerkinElmer AS-90/90A/90plus/91/93plus/S10 Autosamplers. Application: For AS-90/90A/90Plus/91/93Plus/S10 Autosamplers This product is only available to U.S. Domestic Customers. For research…

Agilent produce a variety of inlet and outlet valves designed to ensure the ongoing stability and performance of pump systems in LC applications. Manufactured to Agilent's high levels of quality, security and integrity; LC inlet and outlet valves can be provided for a range of LC pumps. Active…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…

Dissolution vessels are used to hold dissolution media during drug release. Agilent provides a variety of dissolution vessels for use with Agilent dissolution apparatus. Selected verified vessels are available containing a Certificate of Conformance (COC). Dissolution peak vessels (Apex vessels)…