Teflon ® PTFE tipped plungers Replaceable barrels, plungers and tips mL sizes For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel, achieving the seal required for…

Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…

Beakers offer ±5% accuracy All beakers are transparent for clear content visibility and graduated for easily estimating volumes Molded-in pouring spout and rolled-lip creates a dripless working environment Beakers are constructed of polypropylene and are resistant to most commonly used…

Diamond® Essentials™ Griffin Style Beakers meet the demands for mixing, pouring, stirring, and measuring solutions in many laboratory operations. Available in economic polypropylene (PP) or crystal clear Polymethylpentene (PMP), these beakers are the safe, shatterproof alternative to…

Our beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.

Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.

Calibrated "to contain" Red stripe, through which capacity mark is etched for legibility and permanence Barrel-shaped Standard Taper glass stoppers

These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…

Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…

Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions

With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.

Tri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.

Diamond® Essentials™ Griffin Style Beakers meet the demands for mixing, pouring, stirring, and measuring solutions in many laboratory operations. Available in economic polypropylene (PP) or crystal clear Polymethylpentene (PMP), these beakers are the safe, shatterproof alternative to…

Heavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass…

Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A

These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line…

Seamless stainless steel construction With turned rim and parallel sides Without spout Stainless steel lids offered separately Beaker dimensions are listed in inches by H x O.D. x I.D.

Our Berzelius (tall form) beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is…

Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. Griffen style beakers next without sticking together.

Designed from ASTM E 960 Type III 100 mL size graduated in 10 mL intervals; 200, 300 and 400 mL sizes in 25 mL intervals; 500, 600 and 1,000 mL sizes in 50 mL intervals.

Extra heavy wall Low form Molded of FDA Approved high density polyethylene resin. These heavy walled graduated beakers are slightly tapered to allow nesting. Each beaker features two properly formed spouts which assist in pouring and preventing dripping.

Nalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…

Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings.  Glass beads indicate full capacity line. Permanent white enamel…

Beakers, molded in polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New Style beakers feature oversized, tapered spouts for easier pouring of solutions.

These tri-pour plastic beakers range from 50mL to 1000mL. They are unbreakable and can be used with commonly used acids, solvents and alkalis. The laboratory beakers can be autoclaved and are reusable, yet are inexpensive enough to be disposable. All six sizes are graduated in mL. Polypropylene…

Lifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…

Round bottom and long neck 30 mL size has square-cut mouth for multiple micro digestions; mouths of larger sizes are tooled for uniform rubber stopper fit. 30 mL flask conforms with ASTM Standard E 147 for microchemical apparatus; 100 mL through 800 mL flasks can be used in ASTM E 258 procedure.

Polystyrene, disposable pipets for tissue culture, bacteriological, and research applications      Sterile      RNase-/DNase-free      Noncytotoxic, nonpyrogenicity tested to less than 0.1 EU/mL      BSE/TSE-free…

Breakage is minimized by the heavy wall construction The large hexagonal base, sealed to the cylinder body, increases stability and prevents the cylinder from rolling off lab bench tops

Calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 The double scale, numbered up and down, is in durable white enamel. Supplied with shock-absorbing polyethylene bumper guards.

Chemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…

Translucent beakers are resistant to strong acids and bases, organic solvents, and commonly used laboratory reagents. Autoclavable beakers have excellent temperature resistance (250oF). The beakers are molded with a special "dripless" lip.