Solutions, UN3264
-
Ricca 8% (w/v) Aqueous Perchloric Acid
Ricca ChemicalThe Ricca Chemical perchloric acid with composition of 92.41% water and 7.59% perchloric acid is suitable for research and laboratory use. It is used in metal plating, making explosives and electro polishing. This acid also separates sodium and potassium by acting as an oxidizer. It can be stored…
-
Tri-Acid Solution, Volumetric
Reagents®Composition: Water 81.98%, Nitric Acid 8.40%, Hydrochloric Acid 5.22%, Sulfuric Acid 4.41% Density: 1.09 Color: Colorless to slightly yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 36 Months Storage: Ambient DOT: UN3264, CORROSIVE…
-
Manganous Sulfate, Solution
Reagents®Composition: Water 57.51%, Sulfuric Acid 23.04%, Phosphoric Acid 14.45%, Manganous Sulfate Monohydrate 5% Boiling Point: 850 °C Density: 1.27 Melting Point: 700 °C Color: Pink liquid Physical State: Liquid Solubility Information: Miscible Synonyms: Manganous Sulfate in Phosphoric and…
-
Ricca 10% (v/v) Nitric Acid
Ricca ChemicalThe Ricca Chemicals nitric acid can be used to increase the number of acid sites by altering the surface of activated carbon. It is a common laboratory reagent and an important industrial chemical for the manufacture of fertilizers and explosives.
-
-
Inconel GE Etch, Volumetric
Reagents®Composition: Water 49.21%, Ferric Chloride Hexahydrate 38.42%, Hydrochloric Acid 12.37% Density: 1.29 Color: Brown liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.…
-
Ricca Ferric Alum Indicator
Ricca ChemicalThe Ricca Chemical ferric alum indicator with a composition of 81.58% water, 9.26% ferric ammonium sulfate dodecahydrate and 9.16% nitric acid, is suitable for use in medicine, chemical analysis and metallurgy. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 5% v/v Nitric Acid
Ricca ChemicalNitric acid is the inorganic compound with the formula HNO3. It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water.
-
Copper Sulfate, 22.5% (w/v), Volumetric
Reagents®Concentration: 22.5% with 11.3% Hydrochloric Acid Composition: Water 76.07%, Copper Sulfate Pentahydrate 19.64%, Hydrochloric Acid 4.29% Boiling Point: Approximately 100°C Density: 1.15 Color: Blue/green liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf…
-
Copper Sulfate, 20% (w/w), Volumetric
Reagents®Concentration: 20% w/w with Hydrochloric Acid Composition: Water 76.35%, Copper Sulfate Pentahydrate 19.96%, Hydrochloric Acid 3.69% Boiling Point: 100°C Density: 1.1 Color: Blue/green liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
Ricca O-Tolidine Reagent
Ricca ChemicalThe Ricca Chemical o-tolidine reagent with a composition of 93.32% water, 6.55% hydrochloric acid and 0.14% o-tolidine dihydrochloride, is suitable for use in analytical, clinical and forensic chemistry applications. It can be stored at a temperature of 15 to 30 degree C.
-
Sodium molybdate, Na2MoO4, is useful as a source of molybdenum. This white, crystalline salt is often found as the dihydrate, Na2MoO4·2H2O. The molybdate(VI) anion is tetrahedral. Two sodium cations coordinate with every one anion.
-
Cerium(IV) sulfate solution, 0.1N in water
BeanTown ChemicalCAS: 13590-82-4 EC No: 237-029-5 MDL No: MFCD00148852 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid Linear Formula: Ce(SO4)2 MW: 332.24 Density (g/mL): 1.05
-
Stannous Chloride, 10% W/V Solution
GFS ChemicalsSnCl2•2H2O CAS#: 10025-69-1 F.W.: 225.63 For mercury determination
-
Ricca Copper Sulfate Solution
Ricca ChemicalThe Ricca Chemicals copper sulfate solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Aluminum Can Coating Test
-
Ricca 2% (w/w) Nitric Acid
Ricca ChemicalThe Ricca Chemicals 2% (w/w) nitric acid is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Chloroplatinate Solution
Reagents®Composition: Water 94.43%, Hydrochloric Acid 4.25%, Potassium Hexachloroplatinate (IV) 0.74%, Cobalt (II) Chloride Hexahydrate 0.58% Density: 1.03 Color: Orange liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient DOT: UN3264, CORROSIVE…
-
Mixed Acids
Reagents®Composition: Water 52.22%, Nitric Acid 20.29%, Phosphoric Acid 13.86%, Sulfuric Acid 13.63% Density: 1.3 Color: Colorless to yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: UN3264, CORROSIVE LIQUID, ACIDIC,…
-
Ammonium Molybdate TS
Ricca ChemicalWe offer a broad range of USP (United States Pharmacopeia) and multicompendial (USP/EP) solutions and test reagents. Our product line - the most extensive available - makes it easy for you to select and order the products you need. Our FDA-registered and inspected facilities, cGMP compliant…
-
Ceric Sulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 87.08%, Sulfuric Acid 8.06%, Ceric Sulfate 4.86% Boiling Point: Approximately 100°C Density: 1.09 Melting Point: Approximately 0°C Color: Orange liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
Ricca SPADNS Reference Solution
Ricca ChemicalThe Ricca Chemicals SPADNS reference solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Fluoride Determination
-
Titanium(III) chloride solution, 20 wt. % in 3% hydrochloric acid
BeanTown ChemicalCAS: 7705-07-9 EC No: 231-728-9 MDL No: MFCD00011266 UN No: UN3264; Haz Class: 8; Packing Group: II Liquid Linear Formula: TiCl3 MW: 154.23 Density (g/mL): 1.192
-
Ricca Matrix Modifier
Ricca ChemicalThe Ricca Chemical matrix modifier with a composition of 94.59% water, 4.91% nitric acid, 0.49% palladium and 0.01% hydrochloric acid, is suitable for use as a buffer for analyte stabilization or sample matrix volatilization. It can be stored at a temperature of 15 to 30 degree C.
-
Mixed Acid Solution
Reagents®Composition: Water 79.29%, Sulfuric Acid 16.32%, Hydrochloric Acid 4.39% Density: 1.11 Color: Colorless liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. …
-
Palladium Nitrate, Solution
GFS ChemicalsPd(NO3)2•2H2O CAS#: 10102-05-3 F.W.: 266.46 Matrix modifier for graphite furnace AA. Nominally 1% Pd solution in about 5% nitric acid.
-
-
-
Hydrogen tetrachloroaurate(III) solution, Au 40-44 wt. %
BeanTown ChemicalCAS: 16903-35-8 EC No: 240-948-4 MDL No: MFCD00011322 RTECS: CK6330000 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid Molecular Formula: HAuCl4 MW: 339.79
-
Perchloric Acid Solution, 0.1 N, Aqueous
GFS ChemicalsHClO4 CAS#: 7601-90-3 F.W.: 100.46 0.10 mol/L
-
-
Bismuth Nitrate, 0.01M, Standardized
Reagents®Concentration: 0.01M Composition: Water 93.03%, Nitric Acid 6.51%, Bismuth (III) Nitrate Pentahydrate 0.46% Boiling Point: Approximately 100°C Density: 1.1 Melting Point: Approximately 0°C Color: Colorless liquid. Physical State: Liquid pH Range: Solubility Information: Miscible …
-
Keller's Etch
Reagents®Composition: Water 96.22%, Nitric Acid 2.59%, Hydrochloric Acid 0.64%, Hydrofluoric Acid 0.55% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless to slightly yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible…