Stir samples for better accuracy without the difficulty of a separate stir plate and stir bar. Orion stirrer probe with paddle, for benchtop Orion Dual Star and VERSA STAR series meters Provides automatic solution stirring with direct control from Thermo Scientific™ Orion…

Thermo Scientific Orion Star A211 pH benchtop meters are easy to use, dependable laboratory meters with advanced features and functions. Selectable read modes and stability indicator give you flexibility and control over your testing. All critical data is shown with your measurements including…

Built-in Smart chip offers advanced functions and features to a stick style pH meter not found anywhere else RENEW feature that tells you when it's time to replace your pH electrode CAL feature that tells you when it's time to recalibrate your meter Flat Surface pH electrode that is…

In addition to pH, voltage and temperature measurement, the 780 pH Meter also offers an automatic stirrer control, a multi-point calibration with up to nine buffers, a method memory and various monitoring functions. The automatic pH electrode test in conformance with GLP permits objective…

Best value for an IP67-rated waterproof meter Intuitive, user-friendly icons--electrode status displays pH slope Grip-Clip holder quickly and easily secures the electrode to your beaker Expanded data logging for up to 150 data sets mV offset for calibration of ORP standards,…

Backlit, rugged waterproof meter is ideal for any environment Intuitive, user-friendly icons--electrode status displays pH slope Grip-Clip™ electrode holder quickly and easily secures electrode to side of beaker or container USB or RS-232 output for up to 500 data sets …

Add pH measurement to your meter with the Thermo Scientific™ Orion™ Versa Star™ pH/ISE Multiparameter Module. Select from five measurement modules to customize your meter’s four channels as you need it. The module allows you to design the exact meter you need now, with the…

An Advanced, Research-Grade Benchtop pH Meter with Electrode Offering Accurate, Repeatable Results with selectable resolution from 0.1 to 0.001 and an intelligent i-Steward system, AB41PH has high resolution and consistent accuracy. Equipped with a 6.5-inch large LCD display and a touch keypad,…

Refillable, combination pH electrode for general laboratory purposes as well as beer testing. Reference: single, Ag/AgCl Junction/Flow Rate: ceramic, single / 15-20 µL/h Electrolyte: KCl 3.5M + AgCl Max Pressure: 0.1 bar Range: pH: 0 to 13 Recommended Operating Temp.:…

pH/Conductivity/TDS/Salinity/Temperature The Eutech™ Elite pH and CTS pocket tester simultaneously displays pH, conductivity/TDS/salinity with temperature. This offers a suitable method to measuring multiple parameters with just one meter. This tester can be used with the following…

Highly Reliable and User-Friendly pH Benchtop Meter with Electrode (ST310) for Standard Laboratory Applications with multifunctional touch keypads, AB33PH makes measurement simple and fast within 3 steps. The intelligent i-Steward monitors the condition of electrodes for accurate results. Auto…

Get better testing through better design with the Thermo Scientific™ Orion™ Star A and Versa Star™  Electrode Holder. The Orion Star A and Versa Star electrode holder head has identifiable slots and offers the following benefits: Adjustable probe heights reduce…

Automatically recognizes pH buffer standards Large LCD dual-line display shows pH and temperature readings simultaneously Rugged IP67-rated housing is waterproof, dustproof, and floats in water Leakproof cap with fill line functions as a sample/calibration and hydrating cup …

The Mettler Toledo technical buffer is mainly used for easy sensor insertion. It is used to make quick calibration. Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler distributor to place orders for Mettler products. …

Large display allows you to see measurement values at a glance Custom 3-1/4" x 2-7/16" LCD display Small size conserves valuable benchspace Store and recall up to 100 data sets Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement…

Thermo Scientific Orion Star A121 pH Portable Meters combine simplicity with accuracy. A large LCD displays pH or mV readings along with temperature. Icons provide quick updates on battery life, electrode status and calibration information. Simple button layout and onscreen messages help with…

Fast and accurate readings for the cost of a few rolls of litmus paper 3,000 hours of continuous use Large, easy-to-read LCD Range: 0-14 pH; resolution: 0.1 pH; accuracy: ±0.2 pH Manual, two-point calibration Checker 1 testers have a replaceable screw-type combination pH electrode.

1228Q43 is a waterproof pH, ORP and temperature meter. The housing has been completely sealed against humidity and designed to float. All pH readings are automatically temperature compensated and temperature values can be displayed in °C or °F. The meter can be calibrated at one or two…

The Thermo Scientific™ Expert CTS Pocket Tester is designed for on-the-go measurements such as – Conductivity, TDS, Salinity, Temperature and other related electrochemistry measurements. The Expert CTS Pocket Tester is best used in applications such as environmental monitoring,…

For pHtestr 30 purchased before Oct. 2019 Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers. …

Inkjet printer and accessories are for the Orion 3-, 4-, and 5-Star series meters.

The labForce® TS-MB200 portable meat pH meter is a perfect combination of the most advanced digital processing technology, software design, and electrochemical sensor technology, specially designed for the pH measurement of meat, meat products, fish, and beef. Its blade spear electrode uses a…

Extremely versatile—the meter automatically recognizes which sensors you plug in so you can easily switch parameters whenever you want Select a meter with the number of channels you need (1, 2, or 3) and the sensors for the parameters you are measuring (pH, conductivity, or DO) Eliminate…

Easy user-replaceble sensor allows for quick sensor replacements if needed.  No tools necessary.  Measure pH quickly and easily with the 1001 sensor Use with the Professional Plus instrument Cables must be ordered separately One-year manufacturer’s sensor warranty

Select meter with combination pH/CON probe or separate pH and conductivity probes Intuitive, user-friendly icons—electrode status displays pH slope Grip-Clip electrode holder quickly and easily secures electrode to side of beaker or container USB or RS-232 output for up to 500…

The pH/Ion Meter SevenDirect SD50 provides accurate pH and ion concentration measurements for almost any sample across a wide range of applications. The EasyPlace electrode arm and protective cover are included with the instrument. The benchtop meter's ease of use, data handling…

Measure pH, conductivity, and temperature at the same time! Measured parameter and temperature shown on display at same time Convenient, compact design with large display Stability, calibration, and low-battery indicators Waterproof and dust-resistant IP57 rating – great for use…

The labForce® M1000 Benchtop pH/mV/ISE/Conductivity/DO Meter features automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose. It has three measuring modes for your specific measuring needs:…

Simple-to-Use Benchtop Meter Designed to Easily Measure Conductivity, TDS and Salinity. With six instructional menu buttons and auto temperature compensation, it is an easy and straightforward meter for measurement. A large 5-inch backlit LCD display with complete measurement information simplifies…

WATERPROOF THERMO/PH-METER (IP 57) With interchangeable electrodes (see Code No: 92200-006) Resolution : 0.01 pH / 0.1°C Accuracy : ± 0.02 pH / ±1°C Self calibration : pH 4.00-pH 7.00-pH 10.01 ATC (Automatic temperature compensation) Delivered in box with:…

A waterproof ORP and temperature meter, the housing has been completely sealed against humidity and designed to float. The temperature values can be displayed in °C or °F units. The meter is factory calibrated and measurements are highly accurate with a stability indicator right on the…

Rugged housing with large LCD displaying the parameter being measured together with time, date and temperature (in ºC or ºF). Automatic or manual temperature compensation Automatic or manual ranging Automatic buffer recognition Digital and analog outputs Min/Max and 99 data points …