Chemicals, Buffers
-
1.0 M HEPES pH 7.2
Rockland Immunochemicals Inc1.0 M HEPES pH 7.2 is a concentrated stock solution and should be diluted appropriately with molecular biology grade water or equivalent to its final working concentration. This buffer consists of 1.0 M HEPES at a pH of 7.2 and was prepared using ultra pure reagents dissolved in DEPC treated…
-
FETAL BOVINE SERUM, Certified, Heat Inactivated Origin: United States triple 0.1…
Rockland Immunochemicals IncHeat inactivated fetal bovine serum is for in vitro diagnostic use, not for human or animal therapeutic use. Uses other than the labeled intended use may be a violation of local law. Certified Fetal Bovine Sera meets USDA requirements for abattoir-sourced animals, traceability and country of…
-
Synonyms: TE buffer solution Physical form: 10 mM Tris-HCl; 1 mM EDTA
-
QuickSilver™ TBS and TBST Powdered Buffer Packs
Accuris InstrumentsAccuris QuickSilver™ Powdered Buffer Packs … Fresh buffer, when you need it. Premeasured pouches make 1 liter of 1X buffer solution Just empty pouch into water and stir – no diluting of stock solutions No pH adjustment necessary Quality and consistency guaranteed…
-
EGTA (0.5 M, pH 8.0, Autoclaved)
Boston BioProductsComponents: EGTA(0.5 M), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and autoclaved at 15 psi (121°C) for 30 minutes on liquid cycle. pH: 8.0 ± 0.15 Storage: Room Temp.
-
Fluka Phosphoric acid for HPLC, 85-90%
Honeywell Research ChemicalsChemical name: ortho-Phosphoric acid Chemical synonyms: Orthophosphoric acid Product Brand: Analytical Material form: Liquid Density (g/cm3): 1.71 Molecular weight: 98 Molecular formula: H3O4P Chemical purity: 85-90% (T); 85-90% UN Number: UN 1805
-
Fluka Sodium phosphate monobasic for HPLC, =99.0%
Honeywell Research ChemicalsChemical name: Sodium dihydrogen phosphate Chemical synonyms: Monosodium dihydrogen orthophosphate; Monosodium phosphate; Sodium dihydrogen phosphate Product Brand: Analytical Material form: Solid Density (g/cm3): 2.36 Molecular weight: 119.98 Molecular formula: H2NaO4P …
-
Buffer Standard, pH 7.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Buffer Solution, pH 7.00 (Color Coded Yellow)
GFS ChemicalspH (@ 25°C) 7.00 +/- 0.02 NIST Traceable
-
Buffer Standard, pH 1.68
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
1M TRIS-HCl, pH 8.0
Quality BiologicalA hybridization buffer specifically formulated for use with nylon membranes. It does not contain Denhardt’s Reagent, which may interfere with the hybridization reaction of DNA immobilized on nylon. Formulated for Nylon membrane Filtered through a 0.22 µm membrane DNase, RNase, and Protease…
-
RPI Potassium Phosphate, Dibasic
RPI (Research Products International)The RPI potassium phosphate dibasic is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. The potassium phosphate is mainly used to enhance low blood levels of phosphorus. …
-
-
-
-
Tris Base, Ultra Pure
RPI (Research Products International)Highly purified for use in molecular biology applications. Moisture: <0.2% Color: <20 APHA (colorless) Heavy Metals (as Pb): <0.0001% Insoluble Matter: <0.005% Heavy Metals: 5 ppm pKa (20°C): 8.1 ± 0.1
-
Buffer Standard, pH 1.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
TBE-Urea Sample Buffer
G-BiosciencesLoading buffer to resolve single-stranded DNA oligos or RNA into sharp, distinct bands. For the analysis and purification of products ranging from 20-800 bases, making them an ideal choice for synthetic oligo analysis and purification, RNase Protection Assays (RPA), in vitro transcription studies,…
-
-
Kanamycin, 50mg/mL
Quality BiologicalKanamycin sulfate is a water soluble broad spectrum antibiotic obtained from soil bacterium Streptomyces kanamyceticus. It is an aminoglycoside antibiotic effective against Gram-negative and Gram-positive bacteria and mycoplasma. It binds to the 30S ribosomal subunit, inhibits translocation, and…
-
NIST/DIN pH Buffer Solutions
Mettler ToledoSingle use calibration standards - use one sachet per calibration. Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler distributor to place orders for Mettler products.
-
Fluka Wijs solution volumetric, 0.1 M ICl
Honeywell Research ChemicalsChemical name: Wijs solution Chemical synonyms: Iodine monochloride solution; Iodine according to Wijs for the iodine value determination; Chloroiodide solution; Wijs solution Product Brand: Analytical Density (g/cm3): 1.06 Flash Point (°C): 40 °C Molecular weight: 162.36 …
-
-
ACK Lysing Buffer
Quality BiologicalAmmonium-Chloride-Potassium (ACK) Lysing Buffer is used for the lysis of red blood cells in samples containing white blood cells, such as EDTA-treated whole blood, buffy coats, and bone marrow. Applications ACK Lysing Buffer is used to lyse red blood cells in samples, such as EDTA-treated…
-
Fluka Acetate buffer solution pH 4.6 sodium acetate / acetic acid, for…
Honeywell Research ChemicalsChemical name: Acetate buffer solution pH 4.6 Chemical synonyms: Sodium acetate buffer solution; Acetic acid-Sodium acetate buffer 1:1 pH 4.6 Chemical purity: =99.9% UN Number:
-
TBST [10X]; Tris buffered saline with Tween-20
G-BiosciencesA 10X Concentrated solution of Tris Buffered Saline with Tween® 20. The 10X Concentration is 100mM Tris.HCl, 150mM NaCl, 0.5% Tween® 20 at pH7.5. The 1X Concentration is 10mM Tris.HCl, 15mM NaCl, 0.05% Tween® 20 at pH7.5. TBST…
-
InLab Storage Solution
Mettler ToledoThe Mettler Toledo InLab storage solution finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal. Mettler products are intended for sale/shipment…
-
SDS-PAGE Running Buffer
G-BiosciencesFeatures SDS-PAGE Running Buffer (10X) Compatible with Tris-Glycine gels Separate proteins in the range 6-200 kDa under denaturing conditions 1 X concentration: 25mM Tris Base, 192 mM Glycine, 0.1% SDS Applications Tris-Glycine/SDS Running Buffer [10X] is compatible…
-
Tris Buffered Saline-Tween (20X, with 2% Tween-20, pH 7.4)
Boston BioProductsComponents: Tris Base / Tris-HCl(1 M), Sodium Chloride(3 M), Tween-20(2%) Method: Prepared in 18.2 megohms-cm ± 1 water and autoclaved at 15 psi (121°C) for 30 minutes on liquid cycle. pH: 7.4 ± 0.15 (1X) Storage: Room Temp.
-
Streptavidin Elution Buffer
G-BiosciencesFeatures 8M Guanidine.HCl, pH 1.5 Streptavidin resin also available
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)