Triple display Adjustable volume Adjustable alarm duration Memory recall NIST traceable certificate User-friendly timer displays three different times simultaneously, counts down and alarms. Three different tests may be run at the same time using three line display. Channels can be started…

Ideal for bench use LCD designed for viewing at any angle NIST Traceable® certificate supplied Easy to operate Extra-large keys Accurate to 0.01% Timer counts down from 24 hours to 1 second in second increments. Special memory allows programming an instant replay repeat time, which appears…

Set program in less than 5 seconds Two models Model 1 has an “on” interval setting of 0.01 to 99.99 seconds, 1 minute to 9999 minutes or 1 hour to 9999 hours. Model 2 has separate “on” and “off” interval settings of 1 second to 99 seconds, 1…

Large digits provide ease in reading Water-resistant NIST Traceable® Certificate supplied Accuracy of 0.001% Jumbo digit stopwatch times to 24 hours. It features single action, time-out, cumulative split and continuous timing. Timing resolution is 1/100 of a second for the first 30 minutes. It…

3-in-1 combination meter Combines the functions of a Humidity Meter, Type K Thermometer, and InfraRed Thermometer for non-contact surface Temperature measurement Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio Type K…

NIST Traceable® Certificate supplied 3/8” LCD digits for easy viewing Accurate to 0.01% Times two tests at once Two-Memory Timer delivers on-the-dot timing operations, whether counting up or down from 23 hours, 59 minutes, 59 seconds. Timer can be used as a time-of-day…

Single-action, time-out, cumulative split and continuous timing stopwatches Time to 24 hours Accuracy: 8 sec/day Resolution: 0.01 sec up to 30 min, 1 sec above 30 min Battery type: 1.5 V button cell Stopwatch is waterproof to three atmospheres. Stopwatches have a resolution of…

1 Channel plus memory Resolution is 1 second Accuracy is 0.01% Mini-Alarm Timer/Stopwatch can count up or down. Timing capacity is 99 hours, 59 minutes, 59 seconds. Device comes with easel stand and magnet. Timer/Stopwatch is provided with an individually serial numbered…

Waterproof (IP67) rugged design for heavy duty use CAT IV-600V safety rating for industrial applications 0.5% basic accuracy Over-sized high contrast 4000 count LCD backlit display 1000V input protection on all ranges Dual sensitivity frequency functions Relative Mode Data Hold and Auto…

Traceable® Digital Stopwatch ( 8788T52) Precise, Traceable® timing for enzyme tests, viscosity measurements, animal studies, and other timed lab tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on the finest instrumentation.…

Features three decibel ranges for greater precision Low decibel range: 35.0 to 80.0 dB; medium decibel range: 50.0 to 100.0 db; and high decibel range: 80.0 to 130.0 dB Resolution is 0.1 dB and accuracy is ±2 dB Unit provides weightings for both A and C frequencies to meet IEC 651 Type 2…

Used for blood cell and corpuscle counts or wherever double counting is required Two registers each registers to 9999 Large, rectangular pushbuttons and zero reset knob on both sides Pushbuttons for the two independent registers are color-coded, and both sides are reset simultaneously…

Ideal for measuring inside diameter, outside diameter and depth Stainless steel or carbon fiber models Zero at any point Switch between inches and millimeters NIST traceable Thomas Traceable digital calipers take length/diameter measurements three ways: outside, inside and…

NIST Traceable® Certificate supplied 6-digit 1/4” high LCD Convenient clip attaches timer to buttonhole, belt loop, notebook or keys Accurate to 0.01% The Traceable® Timer Plus is three timers in one: a countdown alarm timer, a stopwatch and a time-of-day clock. The…

Large, digital and easy-to-read from over twenty feet away One-inch high LCD digits help you monitor drying and incubation times Built-in alarm User can program two different activities from 24 hours to one second on portable countdown alarm timer Time-of-day and stopwatch (for counting up)…

Consistent, reliable stirrer speed Digital display Glass ceramic top Conserves lab space Easy-to-use stirrers with digital displays indicate stir speed settings. Microprocessor-controlled feedback maintains consistent repeatable stir speed. Control automatically adjusts motor strength to…

Air velocity ranges /resolution (see chart below for details) Accuracy is ±(1% full scale plus 1 digit) Temperature accuracy is ±0.8°C or 1.5°F Probe expands from 9 1/2 inches to 3 feet in length Features include minimum/maximum memory, data hold and Serial…

Photo/Contact Tachometer includes a non-contact IR Thermometer For non-contact surface temperature measurements Built-in IR thermometer with laser measures remote surface temperature on motors and rotating parts Wide Temperature range of -4 to 600°F (-20 to 315°C) Fixed 0.95 emissivity, 6:1…

Quartz-crystal accuracy Large, 2 1/8" LCD digits NIST traceable Unit displays time in 12-hour AM/PM or 24-hour military time. Temperature can be displayed in °C or °F. Perpetual calendar shows month, date, day of week and automatically adjusts for leap year. Clock includes an individually…

3-5/8 inch high big digits for visibility from 25 feet Radio signal from NIST’s Colorado atomic clock automatically sets correct date/time; calendar displays month/date and day Temperature range: 32 to 113°F (0 to 45°C); resolution: 0.1° Relative Humidity range: 20 to…

Measures up to 1832ºF with 50 to 1 distance to target ratio Laser pointer to identify target area Highest 50 to 1 distance to target ratio measures smaller surface areas at greater distances Widest Temperature range from -58 to 1832ºF (-50 to 1000ºC) Adjustable high/low alarm alerts user…

Detachable clip Accuracy: 0.001% Resolution: 0.01 second Timing capacity: 9 hours Timing functions include single-action, time in/out, continuous timing, cumulative split, interval split, 300 memories and repetitive programmable. Stopwatch is 3” x 2 1/2” x 7/8” and weighs 2.5…

Waterproof pocket size with Air Velocity, Temperature and Windchill The 45118 is a Waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging…

Automatically stores up to 16,000 readings or manually store/recall up to 99 readings Wide range to 40,000Fc or 400,000 Lux Cosine and color corrected measurements Utilizes precision silicon photo diode and spectral response filter Peak mode (10µS) captures highest reading Relative mode…

Display 7/8" x 3/8" to 00.00 Press “min” and “set” together to reset Press “start/stop” to start and again to stop Press any key to stop alarm “Recall” feature returns automatically to preset time Displays up to 99 minutes…

Automatic timing option for simplified, accurate measurement of efflux times Microprocessor controls temperature between ambient and 240°C (464°F) Four-tube capacity Dual digital displays show setpoint and actual temperature °C/°F selectable Conforms to ASTM…

DC/AC Current True RMS Type K thermometer DC Zero Clamp-on multimeter with built-in non-contact InfraRed Thermometer Infared thermometer and rugged double molded housing Non-contact InfraRed Temperature measurements with laser pointer Peak hold captures inrush currents and Transients

2 channels, plus memory Timing capacity: 23 hours, 59 minutes, 59 seconds Resolution is 1 second Accuracy is 0.01% Clock is provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration laboratory accredited by A2LA. It indicates…

Large display Hold function Air current accuracy: ±3% Air current range: 0.4 to 30 meters/second; 80 to 5900 feet/minute; 1.4 to 108 km/hour; 0.8 to 58 knots, 0.9 to 68 miles/hours Temperature range: 10 to 50°C/14 to 122°F RS232 out Unit is ideal…

Time three tests simultaneously with ease 3-line display with easy-to-read 1/2 digits NIST Traceable® Certificate supplied Accuracy of 0.01% Channel buttons Adjustable bench stand Sleek and streamlined case Time may be set from 19 hours, 59 minutes, 59 seconds to 1…

Ideal for Lab use Timer signals drying and incubating times, helps catch all test results, and even alarms for appointments.Extremely simple operation makes it a joy to use. Friendly operation makes it the lab’s most desirable timer. Large 1/4-inch-high LCD digits are easy to read.…

Compact size Convenient portable size with wide temperature range measuring up to 1200°F (650°C) Adjustable High/Low setpoints with audible alarm alerts user when temperature exceeds the programmed setpoints Adjustable emissivity for better accuracy on different surfaces Built-in laser pointer…