Bottles, Tube
-
Snap-Together Conical Tube Rack
Heathrow ScientificFor 15- and 50mL tubes Easy-to-assemble polypropylene racks snap together securely. Designed for stable use in water baths. Features alphanumeric grid reference aids for tube identification. Shipped flat. Wells for 15 mL tubes measure 17 mm dia; wells for 50 mL tubes measure 28 mm dia.
-
-
Tube Racks
MTC BioMTC Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Wire Bijou Bottle/Tube Racks
Heathrow ScientificDurable racks for transport or sample handling. Rack suitable for Bijou bottles and low profile tubes up to 25 mm dia Available in a 2 x 6 or a 5 x 10 format Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable
-
Foam Tube Racks
Heathrow ScientificHigh storage, minimal footprint Lightweight microtube racks are ideal for long-term studies or tube storage. Two-piece racks are constructed of expanded polystyrene (EPS) foam Extra spacing between wells allows easy gripping with fingertips Racks stack securely with nesting…
-
-
PLASTIC TEST TUBE RACK, ROUND, 12-TUBE
United Scientific SuppliesThis circular 12 place Polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings. Pre-assembled.
-
PLASTIC TEST TUBE RACK, ROUND, 24-TUBE
United Scientific SuppliesGood quality round test tube rack will hold 24 tubes up to 20mm in diameter. Solid high-impact plastic construction. Rack is 145mm in diameter and 70mm high, and features a perforated bottom. Shipped preassembled.
-
SmoothRack Test Tube Racks
FTR EnterprisesThe next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent…
-
96-well rack is ideal for the storage and handling of Axygen 0.2mL and 0.5mL PCR tubes Fluorescent color: blue, green, violet, red, yellow Made of polypropylene Lids included Durable, chemically inert, and can withstand extended duration at sub-zero temperatures 5 Racks/Unit; 5 Units/Case
-
Sample Tube Rack
Precision SystemsThe Precision Systems sample tube rack is designed for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of high quality material which ensures long lasting usage. It is easy to handle and convenient to use., with a durable construction, is an…
-
Unique system for transporting blood tubes, urinalysis tubes and other routinely transported tubes. System consists of dense protective foam die cut. Each individual die cut hole can be torn apart to ship individual tubes. Shelf life: 24 months
-
Scienceware® Radioimmunoassay Tube Racks
SP Bel-ArtOrganize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…
-
Leighton Tube Rack
Bellco GlassFor leighton type tissue tubes. Hinged front of rack locks tubes into position. Specifications: Tube Lengths: 125mm-150mm Tubes Per Rack: 36
-
Test Tube Stands
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Three tiered design holds tubes securely Sturdy handles facilitate easy transport 4 Color options for organization of samples or benchtop
-
Rack Tube Conical 15mL 16mm 12 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 conical 15 mL tubes
-
Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter
-
TEST TUBE RACK SET, PLASTIC TUBES
United Scientific SuppliesThis set contains twelve 15ml screw top graduated plastic tubes and a brightly colored two tiered test tube stand.
-
Universal Tube Rack
DWK Life Sciences (Kimble)Universal Tube Rack will fit tubes from 10mm to 17mm OD. 25 position with patented inner clamps that keep tubes centered and vertical. This rack is dishwaher safe and can be used for temperatures up to 90°C.
-
Anti-Spin Tube Rack
ClickBio24 position tube rack for 2 mL FluidX Vials. Anti-spin features allow for easy robotic capping and de-capping. Thermally conductive for temperature control.
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
Rack Tube 6mL 13mm 12 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 12 each 6 ml microcentrifuge tubes, 13 mm in diameter
-
PCR Tube Racks
NEST Scientific USAFit for 0.2ml tubes and strip tubes and 96 well plates Easily stackable to save space Transparent Polycarbonate lid for easy well identification Polypropylene racks can be autoclaved
-
-
Foam Test Tube Racks
JaeceFoam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
Wire Universal Bottle/Tube Racks
Heathrow ScientificDurable racks for transport or sample handling Rack suitable for Universal, McCartney and Scintillation vials and low profile tubes up to 33 mm dia Available in a 2 x 6 or a 5 x 10 format Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable
-
Poxygrid® 500mL Centrifuge Tube Racks
SP Bel-ArtKeeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…
-
Microcentrifuge Tube Rack
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions: 210mm x 70mm x 35mm H (8 ¼" x 2 ¾" x 1 3/8"). Two-level polypropylene rack organized and stores twenty 1.5ml tubes in numbered wells. Tubes protrude 25mm (1") for easy removal.
-
Rack Tube 5mL 12mm 12 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 12 each 5 ml microcentrifuge tubes, 12 mm in diameter Overall dimensions…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)