High precision, universal fit for use with pipettes from other manufacturers Soft, flexible tip cone ensures better pipette tip sealing Fine graduations make it easy to visually check volume Ergonomically optimized cone geometry ensures perfect fit on Eppendorf pipettes New tip…

Labcon Eclipse™ Pre-siliconized pipet tips for use with viscous samples. These tips offer very low surface tension. Every lot is lab tested and certified free of detectable Nuclease (Rnase/Dnase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for…

The 10 µL Biomek FX tip does not have the large air gap found when trying to pipet 10 µL or less with the 20 µL tip. Tips fit Beckman Biomek FX/NX, Multimek AP 96 and Biomek 3000. Genomic (wide bore) tips are also available.

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

MBP is the exclusive manufacturer of the 96-well format Caliper Automation Certified Pipet Tips. Tips are manufactured to exacting specifications. Racks provide the sturdiness required by automation equipment and tips are designed with exceptional straightness. All tips are certified DNase and…

For both fixed- and variable-volume models Precision injection molding care for air-tight fit Made from high grade, virgin polypropylene Free from trace metals for excellent accuracy and reproducibility

Ensure a better seal with the pipetter module, for higher accuracy and precision. The Thermo Scientific™ Finntip™ Flex™ Pipette Tips reduce the amount of force needed to attach and eject tips, significantly lowering the risk of repetitive stress injury (RSI). Excellent for…

The ART 1000 with SoftFit shoulder provides a secure, universal fit. The ART 1000 is pre-sterilized and individually wrapped.

The ultimate protection of pipette and sample against unintentional and unnoticed contamination by aerosols, drops and splashes ep Dualfilter T.I.P.S. filter tips are filter tips with a two-phase filter for contamination protection. The two filter layers made of flexible, hydrophobic…

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. 1200 µL models fit Biohit Proline pipettors while 1250 and 1300 µL models fit Matrix pipettors.

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lowering the risk of RSI. It also ensures…

Reduces sample retention Sterile or non-sterile HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don't use additives or coatings that may affect sample integrity. Low retention tips are for applications requiring high accuracy and reproducibility.…

Guaranteed tip purity for increased precision and accuracy Rigid rack design Precision MBP molding Certified RNase, DNase, DNA pyrogen-free Fits a variety of automated workstations 384-well tip design ensures precise pipetting for volumes of 30 µL or less. Manufactured using non-wettable…

Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…

Racked Pre-sterilized

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lower the risk of RSI. It also ensures a…

Material: Polypropylene Volume Range: 1-200 µl Grad Lines: 5 µl Orifice Outside Diameter: 0.57 mm

Racked Pre-sterilized Certified Pure

Protect pipettes and the samples from contamination with Thermo Scientific™ Finntip™ Filtered Pipette Tips. These sterile, disposable pipette tips keep pipettes clean, and are perfect for PCR amplification applications and for pipetting radioactive, infectious, and aerosol-emitting…

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lowering the risk of RSI. It also ensures…

Enhance the performance of your Perkin-Elmer CCS workstation with BioRobotix tips. One group is designed for the PlateTrak, MiniTrak and Evolution P-3, these tips offer precision dispensing for multi-dispensing assays. Tips are available in 20, 50 and 235 µL volumes and in sterile,…

Finntip Flex filter tips combine the ergonomics of a standard Finntip Flex pipette tip with the safety of a filter tip. Finntip Flex Filter tips are free from DNA, DNase and RNase, making them essential where cross contamination is a major concern and ideal for use in research applications. …

Axygen® Gel Loading Tips are designed to fit a wide variety of single and multi-channel pipettors, compatible with most popular brand of pipettors. These polypropylene tips are nonpyrogenic and RNase-/DNase-free. Available in either flat and round versions, with different outer diameters for…

BioRobotix pipet tips help you get more out of your Tecan workstation. 20 µL and 50 µL liquid-sensing and clean Tecan tips increase the precision of low volume pipetting by minimizing dead air volume within the tip. All Tecan tips come in a hermetically sealed blister pack. These…

Fits Perkin-Elmer/Packard Multiprobe II HT and Multiprobe II HT EX with Hanging Tips Multiprobe hanging tips are designed specifically for the Multiprobe II HT ensuring a superior fit. Offered in clear or liquid sensing versions.

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Graduated versions are marked at 10, 50, 100 and 200 µL.

The Eppendorf Maxitip are tailored to different vessels. Select the right Eppendorf Maxitip which meets your needs. The Eppendorf Maxitip P is designed for aspirating 1 mL to 10 mL, for example from beakers. The Eppendorf Maxitip S for 2.5 mL to 10 mL forms a system with the Maxitip and is used for…

Configure Thermo Scientific™ ART™ Nonfiltered Lift Off Racks and Bulk Pipette Tips with Rainin™ LiteTouch™ Pipettes.

Advanced molding process prevents flash around tip and a perfectly centered opening Smooth uniform surface Convenient packaging Color-coded Fully autoclavable Optimal design with a smooth, clear, hydrophobic surface ensures complete sample dispensing and minimal liquid…

Fits Beckman Biomek FX/NX With a Span-8 Head Liquid Sensing Span 8 for the Biomek FX Make the most of the FX’s liquid sensing capabilities with 20 and 250 µL tips

Eliminate cell fragmentation caused by mechanical shearing with Thermo Scientific™ Finntip™ Wide Orifice Pipette Tips, ideal for pipetting macromolecules. Two different models cover volume range of 10-1000μL Wide orifice tip; inside diameter of orifice is 1.1mm/1.8mm …