The CoorsTek Buchner funnel is used for separation and filtration of solids from liquids. The fixed perforated plate at the bottom contains small pores that allow the liquid to pass through while retaining the solid particles. It has glazed inside and out except for rim. Ceramic Buchner funnel…

Cylindrical style addition funnel similar to CG-1716, but with PTFE stopcocks. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper. For replacement stoppers see CG-3000.

KIMAX funnel constructed with heavy uniform walls and molded rims and fire polished stems to give a long service life. Funnels have a high resistance to chemical attack and mechanical and thermal shock. The 58° funnel angle is a Kimble exclusive, formed to an exact angle for rapid filtration. The…

Durable, versatile, assorted sizes Sturdy, polypropylene funnels Ridges help prevent vapor lock Recommended highly for continuous labwork Steam autoclavable at 121°C (250°F)

Glass Long Stem Funnels, 60 degree angle, Stem length is 150mm.

These autoclavable, table-top Buchner funnels are ideal for vacuum filtration. Includes a tubulated side outlet and accepts standard filters. The 750ml size is 60mm tall, 147mm in diameter, requires 125mm filter paper and the side outlet is 5/8" (16mm).

Easy-to-clean two-piece, polypropylene plastic Buchner funnels include a molded in perforated plate. Lightweight; not top-heavy Steam autoclavable at 121°C (250°F) Use with Vac-Ring Filter Seal (1189N06) for quick filter setup

Sartolab® Vacuum filtration units are designed for the convenient clarification & sterile filtration of tissue culture media and components, biological fluids, and other aqueous solutions. Sartolab® RF BT vacuum filtration units are available as ready-to-use disposable 50 mL, 150 mL,…

Flast flowing with Fritware® Porous Plates HDPE with sealed-in, polyethylene filter plate of coarse porosity (90-130 microns) Offer good retention and fast flow under vacuum Can be used with or without filter paper Use below 52°C (125°F)

Designed for analyzing particulate contamination of hydraulic fluids and oils using gravimetric or particulate counting methods and can be used in exfoliative cytology applications. Complete set includes a borosilicate glass funnel and base, anodized aluminum spring clamp, stainless steel support…

Similar to CG-1402, but with the height above the disc increased by 33% for greater capacity. Not recommended for use where pressure would exceed 15 PSI.

Designed to help prevent contamination during use Recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents Replaceable supports available Filter size: 47 mm; 3/8” hose connection A ground joint connection eliminates…

For standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable

Buchner Funnel, Fritted Disc Capacity: Multiple capacities available ranging from 2-600mL Disc OD: 10-90mm available Porosity: Xtra Course, Coarse, Medium, and Fine available Not recommended for filtration where pressure will exceed 15 psi

These filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit.…

FILTER FUNNEL Filter funnel measuring 3" wide. Useful for separating solids from liquids, as well as for easier transfers of liquids to narrow mouthed containers INDUSTRIAL QUALITY Made of chemical resistant polyethylene plastic 3 INCH STEM Funnel stem measures 3" in length with an outer…

Useful in pouring powders or liquids into ground joint containers. Available with standard taper or spherical inner joint. Funnels without joints listed under 7242.

Cylindrical style addition funnel with a threaded, grease-free extended tip valve. Design of all PTFE plug permits semi-needle valve action. With a standard taper top outer joint and lower inner joint, both being the same size, and pressure equalizing arm. Funnels with 14/20 and 19/22 joints are…

Table-top Buchner funnels with coarse porosity (90-130 microns) with a removable punctured filter plate. The high density polyethylene rigid plate is 4.8mm (3/16") thick. Holes are 4.8mm (3/16") diameter on 11mm (7/16") centers. A removable filter plate allows easier cleaning and…

Funnels. High-density polyethylene. These funnels are ideal for many applications in the laboratory and industry. Upper portion of funnel is straight sided, helps prevent spill-over. Maximum temperature for high-density polyethylene is 110°C.

Useful for direct filtration applications of small volumes under vacuum. Complete apparatus consists of a Buchner funnel with 14/20 top outer and lower inner joints, and a 50mL Erlenmeyer flask having a 14/20 outer joint.

Long and short stem funnels are ideal for filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to…

Durable, break-resistant, non-toxic polysulfone exhibits low protein- binding and is easy to clean Same funnel design as glass funnels without breakage problems Upper reservoir is graduated in 25 mL increments from 100 to 250 mL Unique fit of upper and funnel sections ensures no…

Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base…

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

Buchner funnels available with medium porosity (45-90 microns) or coarse porosity (90-130 microns). Fixed and removable filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. Buchner funnels are also available…

Cylindrical with joint at top and bottom, drip stem, and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond the joint, thereby eliminating a possible source of breakage. PTFE or metering valve stopcock plug.

High-Density Polyethylene. Economically priced funnels with ribs which prevent air lock and speed filtration. The two smallest sizes are high-density polyethylene, the remainder are polypropylene. Funnel Set (1210B90) includes one each: 50mL (1210B85), 75mL (1210B86), 100mL (1210B87), and…

Unique gravity-sealing design Two-piece construction One-handed operation Large membrane access points for forceps Available in polysulfone or polypropylene No clamps or locking devices to manipulate. Less expensive than stainless steel, glass or magnetic funnels, yet compare favorably with…

Polysulfone Durable and non-toxic Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber…

Funnel has a sealed-in glass fritted disc of the listed porosity. Useful wherever filter paper or membranes cannot withstand the chemical attack of the filtrate. Constructed with heavy wall stems and the top of the funnel is beaded for additional strength. Not recommended for use where pressure…

Ready-to-use 100 mL filtration units with removable cellulose nitrate membrane and culturing devices. Saves up to 50% in time with no flaming and sterilization required Minimizes the risk of cross contamination Easy release of membrane