Centrifuge Tube Swing Buckets & Adapters
Centrifuge tube swing buckets or safety bucket lids are designed to prevent accidental sample spillages and ensure lab safety.
Other accessories also include rotor adapters, which are suitable for use in different types and sizes of sample tubes and containers.
Balance kits are available to ensure the balance and enhance the reproducibility and accuracy of separation results.
Identification accessories include barcode labels and systems to label and track samples throughout centrifugation, ensuring traceability and improving laboratory productivity.
Centrifuge accessories are incredibly compatible with different model styles, which allows customization of your centrifuge setup. Accessories include plate adapters with microplates, PCR plates, and other accessories suitable for high-throughput sample processing.
-
-
Accepts two 8-tube PCR strips or 16 0.2 mL tubes Snaps onto the standard 18-place rotor Max. speed: 14,000 rpm/9,400 x g Adapter is easily removed and replaced with one hand and is ideal for quick spins.
-
These Eppendorf A-4-62 rectangular replacement buckets for swing-bucket rotors are used with centrifuge models 5810 or 5810 R. Packaged in sets of four Autoclavable at 121 degrees C for up to 20 minutes Bucket Capacity: 250 mL This set of replacement buckets is an accessory…
-
Sprout® Portable Centrifugation Kit
Heathrow ScientificSpin Samples On-the-Go The Portable Centrifuge Kit by Heathrow Scientific offers a convenient way to spin down and prepare samples outside of a conventional laboratory environment. The centrifuge kit enables the processing of samples before deterioration can take place and can be used in…
-
M-20 Microplate Rotor Package
Thermo ScientificCentrifuge up to 6 microplates. Includes: Two buckets, two adapters Capacity: 2 x 3 Standard, 2 x 1 Deepwell plates Max. speed/RCF: 4000rpm/2272xG
-
-
-
-
Rotor 24 x 2 mL Without Lid (5702)
EppendorfFixed-angle Rotor F-45-24-11 for Centrifuges 5702 or 5702 R or 5702 RH Maximum rcf: 1,770 x g (4,400 rpm) Low-noise centrifugation without rotor lid Centrifugation of 1.5 mL and 2 mL Eppendorf Tubes® Adapter for: 0.2 mL PCR tubes, 0.4 mL centrifuge tubes, 0.5 mL micro test…
-
Swinging-Bucket Centrifuge Rotors
Beckman CoulterSwinging-bucket centrifuge rotors feature a full pathlength, slow run time, and excellent resolution. The swinging bucket rotor allows the tube to change angle during the run. The buckets are vertical when stopped and horizontal when running. The parallel geometry of the swinging buckets allow…
-
Centrifuges & Accessories
Thermo ScientificRacks of different colors, material compositions, and holding capacities designed to contain and organize various types of laboratory supplies for a wide variety of storage applications. Includes test tube racks, plate stackers, and freezer racks.
-
-
-
Fixed-Angle Rotors
Thermo Scientific1227M77: Thermo Scientific 8 x 50mL Fixed-Angle Rotor is ideal for high-risk applications.
-
The Slide Spinner is perfectly designed for drying microarray slides prior to scanning. Superior Scanning Results Prior to scanning a microarray slide, it is necessary to remove all wash buffer. This drying step is critical to obtain the best possible scanning results. Labnet's new…
-
Cytology Spin Slides
Azer ScientificDesigned for use in the Shandon® and Stat-Spin® cyto-centrifuges, and the Wescor Cyto-systems Feature defined markings for optimal operation Each circle is specifically marked to easily locate the centrifuged specimen
-
Rotor FA-6x250
EppendorfFixed-angle rotor for up to 6 x 250 mL bottles 1 Ideal for the pelleting of microorganisms and mammalian cells 12 different adapters for broad range of additional applications Max. speed 15,054xg (10,100 rpm) Eppendorf QuickLock rotor lid for fast lid locking Aerosol-tight 2 for…
-
Hettich Centrifuge Accessories
Hettich InstrumentsAccessories and replacement items for Hettich centrifuges.
-
Swing-Out Rotors
Thermo Scientific1227M96: The Thermo Scientific 4 x 180 swinging bucket rotor is used for Thermo Scientific Sorvall* Stratos rotors and adapters.
-
Fixed Angle Centrifuge Rotors
Beckman CoulterFixed-angle rotors feature a medium pathlength, a fast run time and excellent resolution. In fixed-angle rotors, tubes are held at a constant angle during the spinning operation, typically between 23°– 38° from vertical. They’re commonly used at higher speeds, for small to…
-
TX-400 Swinging Bucket Rotor
Thermo ScientificThe rotor accepts 32 to 76 blood tubes and up to 16 conical tubes in a single run. Flexible capacity with adapters ranging from 400 to 1.5mL. Capacity: 4 x 400mL (1.6L) Maximum Speed/RCF: 5000rpm/4696xG For Hereaus Megafuge 16/Multifuge X1, Sorvall ST 16, Legend X1 and SL16 …
-
Floating Microtube Racks
United Scientific SuppliesFloating microtube racks are ideal for thawing, cooling, or incubating samples in water or ice baths at a wide range of temperatures from -70C to 100C. Tubes are supported below the lip while conical ends are immersed in water. Racks feature a handle for easy removal from water bath as…
-
-
Adapter for Mini Plate Spinner C1000. The Mini Plate Spinner C1000 is 75% smaller than most plate centrifuges and accepts skirted, non-skirted and all standard PCR plates. Quickly spins down droplets and condensation. Use before and after thermal cycling to improve PCR yield. Support: 8 x…
-
-
Super High-Capacity Swing Bucket Rotor
EppendorfFor Eppendorf multi-purpose centrifuge models 5810 and 5810R Maximum capacity 4 x 400 mL Maximum speed 4,000 rpm Variety of adapters and capacities available Super high-capacity swing bucket rotor with wide speed range and choice of rotors provides maximum application versatility…
-
Labnet Tank Assembly
LabnetThe Labnet tank assembly is made of durable materials and meet all your laboratory requirements.
-
Aerosol Covers for 250mL Pk 2
EppendorfFor use with buckets supplied with swinging bucket rotor (2509D70). Covers fit over buckets individually to provide an aerosol-tight seal.
-
-
For use with Eppendorf rotor model A-4-81. Adapter designed for 1 x 400 mL centrifuge tubes Fits 1 tube per adapter; 4 tubes per rotor Adapter is autoclavable Pack of 2