Troemner Balance & Calibration Weights
-
To get all the accuracy your electronic balance and/or scale provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose. Weights are available in a…
-
Calibration Weight Sets Adjusted to Meet or Exceed ASTM Class 1-4 Tolerances Troemner ASTM Class 1-4 offer high accuracy with tight tolerances and uncertainties of less than 1/4 of the tolerance. Weight surfaces meet or exceed ASTM and have a highly polished finish. Available in high…
-
Class 4 For calibration of semi-analytical balances and for student use. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies that require traceability but do not need to meet any stringent regulatory requirements. The Traceable Weight…
-
Class 3 Appropriate for calibrating balances with moderate precision and with a readability as low as 0.1 g to 0.01 g. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies that require traceability but do not need to meet any stringent…
-
Analytical Precision Class 1 Weights
TroemnerClass 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. NVLAP Accredited Certificate Troemner's NVLAP Accredited Certificate provides compliance in…
-
Class 4 For calibration of semi-analytical balances and for student use. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies that require traceability but do not need to meet any stringent regulatory requirements. The Traceable Weight…
-
Class 3 Appropriate for calibrating balances with moderate precision and with a readability as low as 0.1 g to 0.01 g. Cylindrical with handling knob Supplied in high quality polycarbonate case with red insert Manufactured in the USA
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
OIML Precision Class E2 Weight Sets
TroemnerClass E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
For rough weighing operations in physical and chemical laboratories, such as force measuring apparatus.
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies…
-
Economical Stainless Steel Weights
TroemnerANSI/ASTM E617 Class 7 Weights 1 g and above are carefully manufactured of stainless Steel and are cylindrical in shape for easy gripping. Weights 1 g to 100 g are of one-piece construction and are adjusted during manufacture by removing material from the bottom of the weight. Weights 200 g…
-
Weight Analyt Ultra Cls w / WCC 5Kg
TroemnerUltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Weight Precision 500G Ultracls
TroemnerUltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Class 4 For calibration of semi-analytical balances and for student use. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical Stainless Steel and Cast Iron Weights, where a certificate is not ordered is supplied with a Statement of Accuracy. This…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical…
-
The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical…
-
Wt Analyt Ultra Cls w / TC 1Kg
TroemnerUltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Cylindrical with handling knob Supplied in high quality polycarbonate case with red insert …
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Precision Class E2 Weights
TroemnerClass E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Troemner Reference Weight Set
TroemnerTroemner Alloy 8 Stainless Steel Precision Metric Weights are available in Troemner UltraClass, and ANSI/ASTM E617 Classes 0, 1, 2, 3 and 4. Troemner Alloy 8 Stainless Steel Precision Avoirdupois Weights are available in ANSI/ASTM E617 Classes 1, 2, 3, and 4. ANSI/ASTM Class weights meet or exceed…
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Class 0 Used as a primary reference for calibrating other reference standards and weights. Class 0 weights are intended to be used in metrology laboratories where the stability of the environment and careful handling are assured. Although very stable, one-piece construction Class 0 weights have…
-
Weight 3Kg
TroemnerUltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Weight Analyt Ultra Cls w / WCC 1Kg
TroemnerUltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Class 4 For calibration of semi-analytical balances and for student use.