Variable speed control between 200 and 2500 rpm Intermittent or continuous mode Stable low profile body Robust die-cast construction Mixing speed can be selected from 200rpm for very gentle mixing to 2500rpm for vigorous agitation. Choose between `touch' on mode and continuous…

Compact vortex mixer suitable for different mixing requirements, with touch or continuous mode. Original Design • Compact in height and area • Stability is optimized with selection lever related to operating mode • 3 anti-slip rubber feet for staying in required position…

Best Value! The BenchMixer™ sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the BenchMixer provides smooth instant vortexing of even the largest sample sizes, including full 50ml tubes. The unique counter-balance system creates maximum vortexing action,…

The BenchMixer™ V2 utilizes a smooth and powerful mixing technology similar to the original BenchMixer, with the advantage of a uniquely designed reversible rubber head that can be attached to the mixer in two orientations. For the vortexing of single tubes, the cupped surface would generally…

Shaking, mixing, agitating or vortexing Heavy-duty construction Safe for cold room or incubator use Three interchangeable platforms (available separately) accommodate a variety of sample containers to make the Orbit 300 a truly multipurpose shaker. The flat platform,…

• Variable speed of 0 to 3,000rpm for gentle shaking to rapid mixing of samples • Touch or continuous operation mode • Includes a standard top head for mixing a single test tube or other small vessel up to 30mm in diameter • Electronic speed control maintains constant…

Best Value! The Mortexer™ is MORE than your standard vortex mixer. The unique design of the Multi-Head™ (included) features a traditional cup head for general purpose mixing, plus holds up to eight microcentrifuge tubes. The drive system is balanced with Q-Drive™…

Designed for Continuous Duty Applications Heavy-Duty Vortex Mixers feature a heavy-duty design and efficient motor to permit continuous duty operation, and the ability to handle accessory components over the entire speed range. Analog variable speed models or microprocessor-controlled digital…

Compact, with low profile and small footprint. Pressure sensitive cup Continuous or touch operation Rubber suction pads prevent walking, absorb vibration Low voltage supply for safe cold room use 2 Year warranty Power pack is UL, CSA and CE approved

The strong 5-mm vibration orbit yields the best results even with high viscosity media or solids out of solution and quickly gives a smooth and even dispersion Continuous mode: the unit performs a permanent vibration motion Automatic mode: the unit will start once a vessel is pressed to the…

Touch or continous variable speed mode, AgileMixer™ is useful for a variety of applications. With adaptor accessories accommodating tubes and plates and light weight, this unit is ideal from hands-free and touch gentle mixing to suspenending pellets as personaized lab tool. Shaking or…

suitable for touch or continuous operation Suitable for touch operation and continuous operation Wide speed range: 0-2500 rpm/min, stepless speed regulation of motor Adapters securely clicked onto appliance in any position Sturdy cast casing Specially designed…

Vortex Mixers are essential research lab instruments used for mixing & stirring in a variety of applications. Our strict quality control and manufacturing processes ensure every Silent Shaker® Vortex Mixer is precise, accurate and easy to use. These mixers conform to international design…

Shaking, mixing, agitating or vortexing Heavy-duty construction Safe for cold room or incubator use Three interchangeable platforms (available separately) accommodate a variety of sample containers to make the Orbit 300 a truly multipurpose shaker. The flat platform,…

Multi-purpose, maxium convenience.  This sleek and modern designed vortex mixer is capable of meeting the mixing requirements of the most popular test tubes used in todays lab without the need to swap out mixing head units.  The innovative design makes maximum use of the space available,…

Heavy duty platform-based vortexer The Corning Digital Vortexer is a multipurpose shaker dedicated to a variety of shaking and mixing applications. Three easily removable and interchangeable platforms accommodate many different sample containers such as flasks, bottles, tube racks, plates,…

Benchmark’s BenchMixer XLQ has been designed for use in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications. For use with…

Process up to 50 samples at a time Displays for speed and time Pulsing mode Ideal for applications requiring accuracy and repeatability. Operating Features: Microprocessor Control: The variable speed microprocessor control provides consistent uniform mixing action. LED…

OHAUS Multi-Tube Vortexers are ideal for hands-free, high-throughput sample processing. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter are available. Strong suction cup feet reduce motion and prevent sliding on the work surface for safe operation in the lab. Digital…

This kit contains the Bottom Closure with Feet and (4) Screws. The Bottom Closure can be easily installed using either a 1/4" nut driver or pliers. The length of this Bottom Closure is 6-inches.

Designed for Strong, Consistent Mixing of Microplates Microplate Vortex Mixers are designed specifically for continuous duty throughout the speed range. Analog variable speed models or microprocessor-controlled digital models offer exact speed control for applications that demand repeatable…

True pulsing action provides more collisions and random motion For applications requiring more aggressive action than standard vortexing Variable "RUN/STOP" time provides quick pulsing or interval mixing Fully programmable "ON" and "REST" function reduces heat buildup within the vessel,…

The Corning variable speed LSE Vortex Mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, continuous or "touch" mix modes. A range of accessories are available for all common sample tubes and containers. Features:…

Powerful is the best word to describe this mini vortexer. With a 4mm orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4x4 inches, allowing it to fit on…

Talboys Stainless Steel microtube holder holds up to (12) 1.5 -2mL microtubes or 5Ml tubes.

Powerful vortexing for tubes up to 50ml Insta-Touch pressure activated operation "Mini Sized", less than 4 in. wide Available in five color configurations Powerful is the best word to describe this mini vortexer. With a 4mm orbit and fixed speed of 2800rpm, the…

The Mini vortex mixer is the ideal vortex mixer for every lab with its compact size, ease of use, and its economic price point. The 3,000 rpm fixed speed ensures there is no sacrificing any mixing power. Extremely compact and easy operation. Powerful vortexing for tubes up to…

Extremely compact personal vortex mixer with a low profile and small footprint for gentle mixing through to vigorous re-suspension of cell or chemical pellets in up to 50 ml tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation …

Unique Multi-Head™ for general purpose vortexing PLUS holds up to eight microtubes Powerful motor for INSTANT vortexing Continuous or "touch" operation Q-Drive™ dynamic balancing system Variable speed from 200 to 3400 rpm The Advanced Vortexer V-32 is MORE…

Powerful motor for INSTANT vortexing Continuous or "touch" operation Q-Drive™ dynamic balancing system Variable speed from 200 to 3200 rpm The Vortexer V-32 sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the Vortexer V-32 provides…

Versatile multi vortex mixer for vigorous re-suspension of cell or chemical pellets in tubes up to 1.5 ml, with the facility to mix individual tubes up to 15 ml. Adjustable speed control: 500 to 3000 rpm ‘Continuous’ or ‘touch/quick’ operation Handles up to…