Vials, PerkinElmer, Supplies
-
4ml Glass Vials with Cap for NIRA
PerkinElmerOur Glass Vials for the Near Infrared Reflectance Accessory (NIRA) are directly used for measuring reflectance of solids and transreflectance of liquids.
-
2 mL, 11 mm Snap Top Vial
PerkinElmerOur vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-
These autosampler vials with fused inserts offers easy sampling for micro volumes.
-
These autosampler vials with fused inserts offers easy sampling for micro volumes.
-
2 mL, 9 mm Clear Glass Screw Top Vial
PerkinElmerPerkinElmer vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at…
-
Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Screw Top Vials and 100 preassembled Blue Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack. Guaranteed for fit and compatibility, our…
-
18 mm PTFE/Butyl Assembled Cap and Septa,
PerkinElmerUsing only the PerkinElmer lot-tested, certified, approved septa, gives the analyst the same excellent analytical results that the TurboMatrixHeadspace Crimp Vials have always provided.
-
Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a clean environment to ensure you receive contaminant free product every time. PerkinElmer…
-
Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Screw Top Vials and 100 preassembled Blue Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack. Guaranteed for fit and compatibility, our…
-
2 mL, 11 mm Crimp Top Vial
PerkinElmerOur vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-
Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-
Note: Due to the patent which PerkinElmer holdson the closures system of the Headspace vials, the caps, septa, andstar springs cannot be sold separately.(includes patented pressure-relief crimp cap and star springs)
-
Injection Port Septa
PerkinElmerThe PerkinElmer injection port septa with 3 mm thickness is made from solid silicone and the PTFE coating avoids corrosion. This septa is compatible to use with 20 mm headspace vials.
-
20 mm PTFE/Butyl Septa/Cap/Springs
PerkinElmerChoose the right septa for your analysis. Although a wide variety of septa is available, chemical compatibility and temperature are the most critical to the analysis. Temperature applies not only to the vial, but also to the temperature of the instrument’s needle used for pressurization and sample…
-
vial Diffuser
PerkinElmerThe conical shape of the PerkinElmer diffusers allow the needle to penetrate into solvent or waste. Reduces spillage and large losses through evaporation.
-
2 mL Clear Glass Vial, 8 mm Screw Top
PerkinElmerPerkinElmer vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at…
-
Our closures with septa are made in a wide variety of sizes and materials ensuring you have the right combination for your sample type and analysis temperature. Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be…
-
PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Snap Top Description: Amber glass
-
20 mm Crimp Top with PTFE/Silicone Septa - Ultra Bleed Pressure Release (1000/pack)
-
Vial inserts can be used with any of our 9, 10 or 11 mm vials for applications where you have a limited amount of sample.
-
-
18 mm Red PTFE/White Silicone metal Screw Cap/Septa 1.3 mm thickness 8 mm hor; Package: 100
-
9 mm Screw Top Blue Cap with PTFE/Silicone Septa
PerkinElmerEach product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a clean environment to ensure you receive contaminant free product every time. Our closures are…
-
Headspace CTC Vial
PerkinElmerThe PerkinElmer headspace CTC vial with an inside diameter of 20 mm offers a volume capacity of 20 mL and is made from solid glass. Screw-style top of the vial makes it smooth for installation.
-
These autosampler vials with fused inserts offers easy sampling for micro volumes.
-
Cap for waste and wash vial (single cap)
PerkinElmerBlack Phenolic Cap (no septa) for waste and wash function for GC. Use with wash vial, part number 09923031.
-
18 mm White PTFE/Transparent Blue Silicone metal Screw Cap/Septa 1.3 mm thickness 8 mm hole; Package: 100
-
Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Crimp Top Cap with Closure Kit Description: Clear glass PTFE/Silicone septa with aluminum cap
-
PerkinElmer offers a variety of caps and septa to fulfil your application needs. Our screw thread vial caps use the revolutionary Inter-Seal ® . Using a process that bonds silicone/PTFE and other elastomeric compounds directly into thermoplastic closures eliminates liner fallout, while still…
-
Caps p/n N9307019, N9307020, or N9307023. Autosampler vials,available for use with PerkinElmer Autosamplers, are guaranteed forfit and compatibility. Both the borosilicate glass andpolypropylene vials are totally inert to samples ordinarilyanalyzed by Liquid Chromatography.
-
22 mL Crimp Top Vial with P logo
PerkinElmerOur vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you…
-