Legal Information: ABC Vial is a trademark of Wheaton Industries, Inc. Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721 Glass…

Synonyms: rubber stopper; stopper

Reliable Wheaton "180" brand low-potassium glass. White 22 mm caps have tops suitable for writing. Vials with caps attached are packed in individual cells in trays of 100.

Insert fits 12 x 32 mm vials with large opening (6.0 mm)

Storage bottles are generally used to store stock solutions and other chemicals. Amber bottles are used to avoid oxidative changes in photosensitive chemicals. Synonyms: SCREW-CAP AMBER SEPTUM BOTTLE 240ML PK12

Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

Wheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.

The BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…

Headspace vials are of different sizes. The style and diameter of headspace vials depends on the autosampler. The beveled finish vial reduces the amount of sealing surface between the crimp seal and the glass surface.

Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

Application Clear glass, screw top vials with hole-cap PTFE/silicone septa may be used, to contain plant tissue in an experimental study done in order to identify major volatiles emanating from chestnut reproductive plant tissue.

These vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…

Wheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.

Amber glass vials (volume 4 mL, with marking spot) are useful in preventing the sensitive analyte under investigation from exposure to UV light. Screw top vials are used on many autosamplers with a standard opening of 8 mm. The threads on the standard vials are 13-425. Legal Information: …

Vial septa are available in a variety of materials. Septa, tan PTFE/silicone (diam. x thickness 8 mm x 1.5 mm) are sized to fit screw top vials. They are suitable for use with most organics (until pierced) and are not recommended for use with chlorosilanes.

The BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…

Application: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.

Vials are used basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top glass vials are used on many autosamplers with a standard opening of 4.6 mm. Amber glass prevents the…

Septa, tan PTFE/silicone is a gas tight and inert nature septa, which is used for high temperature applications during pretreatment and sample oxidation.

Cap not included.

Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.

Vials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 7 mL, clear glass vial, O.D. x H 17 mm x 60 mm, thread 15-425) are used on many…

Economical and convenient storage for samples in your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120C. Each case contains 5 racks. Synonyms: VIAL RACK,40ML EPA VIAL, 5/CS Legal Information: WHEATON is a registered trademark of Wheaton Industries, Inc.

•Compatible with robotic arm autosamplers •Replaces crimp top autosampler vials •Large target area for needle •Utilizes Step Vial design to center insertThe R.A.M.TM (robotic arm machine) vial is specifically designed to work with a robotic arm autosampler. This 12 x 32 mm vial has a shortened…

Legal Information: R.A.M. is a trademark of J.G. Finneran Associates, Inc. Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721…

Amber storage bottles (volume 120 mL, O.D. x H 49 mm x 114 mm, thread 22-400, bottle only) are primarily used to protect the stored sample from sunlight. Oxidation of various oils is prevented when packaged in amber glass bottles. Synonyms: AMBER SCREW-CAP BOTTLE ONLY 120ML PK12

Vials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Amber glass protects sensitive samples from exposure to UV…

It is used as an air-tight seal, and prevents contamintion

This product is designed to work in the Waters WISP(TM) 96 Position Autosampler. Limited volume shell vials have a precisely designed conical bottom which permits maximum sample evacuation.Vials for waters® 96-position carousel, 8 x 40 mm is used for different life science applications. …

Short thread screw cap, 9 mm thread, with liner are suitable for use with short thread (11.6 X 32 mm) autosampler vials (9 mm thread). The PTFE/rubber septa are compatible with most organic solvents until pierced and are not recommended for aromatics, carbon disulfides, chlorinated solvents,…

Application: It may be used to cut and store fresh plant material for collecting volatiles in solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining bisphenol A, 4-t-octylphenol and 4-nonylphenol in…

Insert fits 12 x 32 mm vials with large opening (6.0 mm)