Legal Information: MRQ30 CD Vial is a trademark of QIS, Inc.

Hole cap is black phenolic.Septum is blue PTFE on white silicone.

These vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…

Screw caps are available as solid caps with aluminum liner. Caps are made from phenolic resin. Solid phenolic caps can withstand a maximum temperature of 205 C.

The new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…

These vials are constructed of clear, borosilicate glass; closure not included.

•Compatible with robotic arm autosamplers •Replaces crimp top autosampler vials •Large target area for needle •Utilizes Step Vial design to center insertThe R.A.M.TM (robotic arm machine) vial is specifically designed to work with a robotic arm autosampler. This 12 x 32 mm vial has a shortened…

Application: Cap liner, PTFE may be used for Erlenmeyer flasks for COD determination.

Reliable Wheaton "180" brand low-potassium glass. White 22 mm caps have tops suitable for writing. Vials with caps attached are packed in individual cells in trays of 100.

Amber glass vials (volume 4 mL, with marking spot) are useful in preventing the sensitive analyte under investigation from exposure to UV light. Screw top vials are used on many autosamplers with a standard opening of 8 mm. The threads on the standard vials are 13-425. Legal Information: …

We recommend using LA Vials with the MSQ polypropylene cap with PTFE/silicone septa. This cap and septa combination was purposely designed for use with mass spectrometry. It shows little to no background contamination when compared to other cap and septa products in the marketplace. Legal…

Pre-assembled 9 mm polypropylene hole-cap, with septum.

The BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…

Storage bottles are generally used to store stock solutions and other chemicals. Amber bottles are used to avoid oxidative changes in photosensitive chemicals. Synonyms: SCREW-CAP AMBER SEPTUM BOTTLE 240ML PK12

Legal Information: ABC Vial is a trademark of Wheaton Industries, Inc. Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721 Glass…

Material PTFE/silicone septum (bonded to cap) Blue polypropylene cap Clear glass vial Feature Closure type blue polypropylene hole cap Closure type screw top vial Packaging Pkg of 100 ea O.D. × H × I.D. …

Crimp seals, 11 mm, with PTFE/rubber septa are for use with 20 mm crimp top vials. The PTFE/rubber septa are compatible with most organic solvents many organic solvents: acetic acid (

Application: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.

Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.

PTFE-fused septa are suitable to overcome the degradation, which happens due to prolonged high temperatures, commonly observed in silicone rubber septa. The degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE face towards the column packing. Synonyms: …

Reliable Wheaton "180" brand low-potassium glass. White 22 mm caps have tops suitable for writing. Vials with caps attached are packed in individual cells in trays of 100.

Vials are suitable basically to inject samples from an autosampler. They are varied in sizes, though 2 mL vials are more commonly used. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Application: Clear glass, screw top…

The new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…

Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

Short thread screw cap, 9 mm thread, with liner are suitable for use with short thread (11.6 X 32 mm) autosampler vials (9 mm thread). The PTFE/rubber septa are compatible with most organic solvents until pierced and are not recommended for aromatics, carbon disulfides, chlorinated solvents,…

Application: Assembled screw cap with hole and PTFE/silicone septum may be used to minimise the risk of explosion of diazomethane, during preparation of diazomethane for gas chromatographic analysis. It was also used to seal off the heat treated samples, during determination of sugar-amino acid…

Other Notes: The inside diameter of vials vary with the manufacture. Only the following insert part numbers are compatible with these large opening vials. •SU860067 PK100 0.1ML GLASS CONICAL INSERT, 6 X 31MM •854988 PK1000 0.1ML GLASS CONICAL INSERT, 6 X 31MM •SU860066 PK100 0.1ML GLASS CONICAL…

These vials are constructed of clear, borosilicate glass; closure not included. Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.

These vials have a 9mm thread that allows them to be used with robotic systems. Use with autosamplers that require 12 x 32 mm screw top or crimp top vials. •40% wider opeing than standard screw cap vials •Superior thread design ensures a secure seal •Compatible with most GC autosamplers that…