The new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…

These vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…

VIALS TAKING 11mm SNAP TOP SEALSLARGE OPENING, 12 x 32mmUse with:Agilent / HP 7673 series I/II,7670A, 7671A, 1042, 1090,8042, 1050, 1082, 1080, 1084AIM CPS-200A.I. (42 vial tray)Alcott 738AltexAMS 42Antek 736ASCBeckman 501, 507Carlo Erba AS V42, AS 105Carnegie CMA 230/200ChrompackDani 39.80, ALS…

It is autoclavable, easy sterilization, is used as a closure type for the containers used to contain substances in order to prevent contamination. Synonyms: Crimp seals with PTFE/silicone septa

Reliable Wheaton "180" brand low-potassium glass. White 22 mm caps have tops suitable for writing. Vials with caps attached are packed in individual cells in trays of 100.

Supelco's new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial's glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes…

Screw caps are available as solid caps with aluminum liner. Caps are made from phenolic resin. Solid phenolic caps can withstand a maximum temperature of 205 C.

These vials provide the advantage of a sealed ampule with the flexibility of a screw cap bottle or a septum vial. These unique, screw-cap sample containers with a 1.2 x 28mm height capillary opening are designed for the storage of volatile samples and reference standards.       Advantages: •No…

This magnetic screw cap has been developed for the CTC instrument. The vial has a precision thread with numberous threads to force the septa against the vial to seal it to be gas tight. The center hole is designed to be used for SPME as well as standard Headspace analysis, but still offers enough…

Insert fits 12 x 32 mm vials with large opening (6.0 mm) Application: It may be used to contain albumin standard solution in an absolute quantification method like protein hydrolysis, o-phthalaldehyde derivatization, and reversed-phase high-performance liquid chromatography analysis in a…

Application: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.

Application: Cap liner, PTFE may be used for Erlenmeyer flasks for COD determination.

Caps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.

Vials (volume 22 mL, clear glass vial, thread 20-400) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.

Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

Application: It may be used to cut and store fresh plant material for collecting volatiles in solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining bisphenol A, 4-t-octylphenol and 4-nonylphenol in…

Autoclavable, easy to maintain. A vial is used to store or as a closure type,in order to prevent contamination.

Vial inserts basically permit the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.

Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.

Application: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum.

Vials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 4 mL, clear glass vial, O.D. x H 15 mm x 45 mm, thread 13-425) are used on many…

The QSertVial(TM) is the ultimate microsampling device. It contains a 300 muL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating…

Legal Information: QSertVial is a trademark of QIS, Inc.

These valves are very easy to use. 1. Push the green button to open the valve2. Insert the needle through the septum and take sample3. Remove the needle and push to close Benefits include: •PTFE construction for inertness. PTFE is useful when working when acids and organic solvents. •Good sealing…

•Compatible with robotic arm autosamplers •Replaces crimp top autosampler vials •Large target area for needle •Utilizes Step Vial design to center insertThe R.A.M.TM (robotic arm machine) vial is specifically designed to work with a robotic arm autosampler. This 12 x 32 mm vial has a shortened…

These vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…

Supelco's new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial's glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes…

Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

Other Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…

It is used as an air-tight seal, and prevents contamintion

Amber glass vials (volume 4 mL, with marking spot) are useful in preventing the sensitive analyte under investigation from exposure to UV light. Screw top vials are used on many autosamplers with a standard opening of 8 mm. The threads on the standard vials are 13-425. Legal Information: …

Synonyms: PK100 2ML AMBER VIAL,SCREW TOP, SOLID CAP W/PTFE LINER