Use with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off…

Empty racks for tubes (SBS-rack): SBS-standard format and stackable Compatible with 2D tubes with internal thread Linear barcode (1D) on long and narrow side Lid with stable closure mechanism Optional available as slide lock and push lock LVL Technologies products…

USEPA-approved Mercury-free COD kits CHEMetrics’ leakproof reagent vials contain premeasured solutions of sulfuric acids and potassium dichromate. To perform the COD determination, the analyst simply removes the Teflon® lined screw cap from the vial, adds sample to the vial,…

Easy to use No tools required Twist of the cap produces an evaporation-proof seal. Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Choose a septa best suited for your application. For customers…

Designed to work in Agilent (HP) and other autosamplers. Neck finish allows use of standard aluminum seals or Poly Crimp™ Seals. Choose from clear or amber Type I borosilicate glass. Available with graduated marking spots which can be written on with a #2 pencil. 2.0 mL volume, 11 mm seal, 12…

Largest opening Closures are ideal for autosamplers requiring closure to support or hang vial in tray such as Hitachi, Jasco, Shimadzu, etc. Larger opening provides increased target area for needle penetration. Available in a wide assortment of colors. The Top Seal™ closure…

Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make…

Available in clear or amber Type I borosilicate glass or polypropylene. Glass vials feature heavier walls for safer handling. Available with marking spots.

CELLTREAT Freeze Cryogenic Vials are designed for storing biological material at temperatures as low as -196°C, in the gas phase of liquid nitrogen Internal thread design prevents contamination and uses O-ring silicone seal to ensure positive seal at any temperature External thread cap…

Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

Transform Agilent vials from full-capacity to limited volume with one simple step. Inserts are compatible with Agilent wide opening screw top, crimp top and snap top vials. Conical Inserts with Polymer Feet (2714M52, N29, N42) With the correct default setting on an autosampler, these inserts…

labForce® Brand autosampler vials, 12x32mm with 9mm screw thread are designed to work in robotic arm autosamplers. Manufactured from Type I borosilicate glass Designed to work in robotic arm autosamplers Available with graduated marking spot Made in the USA

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

Benefits of Qorpak TOC Vials • Vials are certified and traceable; documentation is provided for GMP • High Level Quality Control and Process Control for lower TOC background • Consistently lower levels of background TOC for statistical studies • 80-pack slotted case can be used in clean room…

20 ml capacity vial designed for laboratory scintillation counting processes Clear glass scintillation vials are packaged in cellular trays of 100 pieces Trays are shrink wrapped to preserve cleanliness Closures are packed in polyethylene bags of 100 pieces in a separate tray …

Heat-Shrink Tubing Safely encapsulates tube Easy to apply and remove Recommended when CryoTube® vials are to be used to store all samples for liquid nitrogen or ultra-low temperature cabinets. Polyethylene sleeves 14 mm id x 500 mm long. Cut to fit individual tubes or for use…

Suitable for instruments where vials remain in the sample tray during injection Feature a nominal 5mm diameter opening and 12x32 profile Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass Glass vials feature a graduated, write-on patch for…

Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

Provides quick individual identification of cryogenic vials to simplify inventory maintenance Discs fit into top of closures for 5150C12, C34 and C55 series vials Remains firmly in place during storage in mechanical and liquid nitrogen freezers. Cut-out top, which facilitates handling of vials…

12 x 32 Crimp Top Vials Type I Borosilicate Glass Clear or Amber 40% larger opening Increased target area helps prevent broken needles. Designed to work in Agilent (HP) and other autosamplers. Vial incorporates the unique StepVial design that precisely centers a limited…

Non-sterile or sterile water test sample container Manufactured from pure, recyclable polypropylene One-piece container has attached lid to reduce chance of contamination; leak tight when sealed properly. Tie-down protects from accidental opening Contains sodium thiosulfate tablet to…

Pre-assembled Convenience Packs Components packaged in a tray that fits into bench drawer for easy access. Packaging keeps products visible and particle free. Pre-assembled. Packs come ready-to-use.

The Agilent vial convenience pack is made of high quality materials and ideal for laboratories and pharmaceutical industry. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass Capacity ranges from 2mL to 40mL Provide constant pH for duration of sample storage life Chemically inert caps suitable for most chromatography and storage applications Top grade…

The new Finneran SPME Vials with a thicker lip are ideal for most SPME applications. The thicker lip vial creates a tighter seal on the vial. The Finneran SPME vials are manufactured from high quality Type I borosilicate glass. This new thicker lip vial is available in 10mL and 20mL capacities. To…

Available in a wide assortment of colors. Designed for use with Waters, Shimadzu, Spectra-Physics, Varian and other autosamplers. The Top Seal™ closure with a 0.010" molded septa allows for easy needle penetration and is inert to most solvents. The one piece design saves time by…

Black polypropylene vials protects against light sensitive samples from having a chemical reaction during sampling, testing, storage or transporting. The polypropylene provides added safety by eliminating breakage.

The Finneran R.A.M.™ 350 uL threaded vial with flanged flat bottom insert, is suitable for use in chromatography autosamplers. It is mainly used in research laboratories or in chemical industries. This vial is made of sturdy glass material which ensures long lasting usage and durability.

F217 is a triple layer liner that consists of a foamed polyethylene core between two layers of virgin low-density polyethylene. The liner is faced with another layer of PTFE (polytetrafluoroethylene). The lined polypropylene closures have excellent chemical resistance, a low moisture transmission…

For use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the…

Our pre-barcoded kits allow efficient, accurate sample handling and tracking through advanced analytical chemistry procedures. We offer two prepared chromatography kits to promote accuracy and efficiency in your laboratory. Each kit includes 100 pre-barcoded glass vials and their accompanying…

Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10…