Vials, Ready to Ship
-
11mm Snap Top Caps™
J.G. FinneranUse with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off…
-
-
Limited Volume Vial Inserts
J.G. FinneranLargest available variety Save reagents Requires less sample Limited volume inserts are available in a variety of designs to accommodate all size vials and all types of autosamplers. Polymer Top Springs™, bottom springs and metal springs act as shock absorbers that protect…
-
Seals For Headspace Vials
J.G. FinneranPreassembled aluminum seals reduce contamination during sample preparation and save valuable time in the lab.
-
Standard Aluminium Seals / Capped Vials
J.G. FinneranFor use with 12 x 32 mm crimp top vials Septa included Larger opening Variety of colors Increased target area for needles helps prevent breakage. Allows color coding for easy sample identification. Our 11mm aluminum seals and snap caps are available assembled with a…
-
CELLTREAT Freeze Cryogenic Vials
Celltreat ScientificCELLTREAT Freeze Cryogenic Vials are designed for storing biological material at temperatures as low as -196°C, in the gas phase of liquid nitrogen Internal thread design prevents contamination and uses O-ring silicone seal to ensure positive seal at any temperature External thread cap…
-
Limited Volume Snap Ring™ Crimp Top 12 x 32 Vials
J.G. FinneranGlass Insert/Plastic Outside Vials are a combination of Type I low extractable borosilicate glass inserts and clear or amber thermoplastic polymer outer vial shells. Only the glass contacts the sample and the seal. Item No. 302511CP-12 The new Finneran 4-Fin Polypropylene 11mm Crimp/Snap…
-
Thomas Screw Cap Septum Vials
Thomas®Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10…
-
Snap Plugs For Shell Vials
J.G. FinneranStarburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial while still providing a tight fit for good sealability.
-
VOA Vials - Solid Top Closures, PTFE Lined, Precleaned
J.G. FinneranAvailable in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…
-
Interlocked™ R.A.M.™ Large Opening Vials
J.G. FinneranInterlocked™ Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.
-
Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.
-
Big Mouth Autosampler Vials
J.G. Finneran12 x 32 Crimp Top Vials Type I Borosilicate Glass Clear or Amber 40% larger opening Increased target area helps prevent broken needles. Designed to work in Agilent (HP) and other autosamplers. Vial incorporates the unique StepVial design that precisely centers a limited…
-
Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.
-
Snap Seal™ Vials - 12 x 32mm
J.G. FinneranType I borosilicate glass Clear or amber Accept a variety of seals The Snap Seal™ Vial can be securely sealed with the Poly Crimp™ Seal, an aluminum crimp seal or a variety of Snap Top Cap™ designs. The unique design provides for a secure seal with any…
-
Top Hat Closures And Septa
J.G. Finneran8-425 mm The patented Top Hat™ septa and closure was designed to provide a positive physical lock to assure preassembled components arrive intact. Flat septas also available.
-
Standard Opening Crimp Top Vials
J.G. FinneranDesigned to work in Agilent (HP) and other autosamplers. Neck finish allows use of standard aluminum seals or Poly Crimp™ Seals. Choose from clear or amber Type I borosilicate glass. Available with graduated marking spots which can be written on with a #2 pencil. 2.0 mL volume, 11 mm seal, 12…
-
Economical, Sterile Cryogenic Vials for General Storage
Thermo Scientific NalgeneSame as 5150C12 series, except bulk-packed Conical bottom allows complete retrieval of sample Non-cytotoxic; non-pyrogenic When used with cryogenic holder, base of vial interlocks with holder to permit one-handed replacement of closure. Fill line, graduations and large marking area on vial.…
-
Microvolume Inserts For 2 mL , 8-425 Screw Top Vials
Agilent TechnologiesConical Inserts with Polymer Feet Microvolume inserts transform vials from full-capacity to limited volume with one simple step. The inserts featured here are compatible with 8-425 screw top vials. Conical Inserts with Polymer Feet (2714S18) Polymer feet act as the inserts' shock absorber to…
-
Seals For 15 X 45 mm Snap Seal Vials
J.G. FinneranSnap Seal vials can accept aluminum crimp seals or Snap Top Caps. 2701H01 through H22 are aluminum seals, 13 mm with Septa; 2701H25 through H58 are Snap Top Caps, 13 mm with Septa. 2701H61 through H82 fit Shimadzu autosamplers.
-
Vial Convenience Pack
Agilent TechnologiesThe Agilent vial convenience pack is made of high quality materials and ideal for laboratories and pharmaceutical industry. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Vial Sample S / TW / PTFE Cap 4ml Cs144
DWK Life Sciences (Kimble)Sample Vials Screw-Thread PTFE Closure Clear, KG-33 Borosilicate Glass The 16 mL size complies with EPA 600 Series Methods
-
Limited Volume Inserts with & without Bottom Springs
J.G. FinneranJ.G. Finneran Associates designed Limited Volume Inserts with and without Bottom Springs to ensure that autosamplers extract even the smallest sample volumes every time, without damaging injection needles or breaking sample containers. The inserts preassembled with polymer bottom springs act…
-
11 mm Poly Crimp Seals, PTFE/Red Rubber Septa
J.G. FinneranFor use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the…
-
Convenience Kits, 9mm Clear Vials
J.G. FinneranFinneran Convenience Packs - components are packaged in a clear lid tray with 100 vials and 100 preassembled closures and septa. Tray fits into bench drawer for easy access. Packaging keeps vials and closures visible and particle free. Convenience packs come ready to use. Available in many…
-
Crimp Caps With Septa
Agilent Technologies11 mm cap Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Autosampler Vials, Large Opening R.A.M.™
J.G. FinneranLarge opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…
-
0.9ml Dual-coded Tube, 96-format, External Thread
Azenta Life Sciences (formerly FluidX)Azenta Life Sciences dual-coded tubes feature a 2D code and human readable number on tube base, allowing compatibility with low throughput manual, semi-automated or fully automated workflows on integrated platforms Next Generation manufacturing techniques Code readable without removing tubes…
-
Polypropylene Limited Volume Vials
J.G. FinneranBlack polypropylene vials protects against light sensitive samples from having a chemical reaction during sampling, testing, storage or transporting. The polypropylene provides added safety by eliminating breakage.
-
Clear R.A.M.™ Vial with Ribbed Screw Thread Cap
J.G. FinneranLarge opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…
-
Limited Volume Inserts
labForce® (powered by Thomas Scientific)labForce® Brand Limited Volume Inserts are ideal for sampling small volumes using a labForce® 12x32mm vial for support. Inserts are pre-assembled with a polyethylene spring which aids in alignment. Manufactured from Type I borosilicate glass Conical design permits complete sample…
-
11 mm Poly Crimp Seals, PTFE Septa
J.G. FinneranFor use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the…