Tubes, PerkinElmer, Supplies
-
PTFE connecting tube for connection to digestion vessels with 8 and 16 position Gas Containment Manifold.
-
These tubes are fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent/Varian part 63-100037-00. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the highest quality material guaranteed to…
-
The exceptionally uniform temperature distribution obtained with transverse heating significantly reduces or eliminates condensation of the sample matrix components and "memory" effects and improves the atomization efficiency for refractory elements. For improved characteristic mass with volatile…
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
GBC Standard Graphite Tube, Pyrolytically Coated
PerkinElmerThe GBC Standard Graphite Tube is pyrolytically coated, D7/3.7x24.2 mm and comes in a quantity of 10. This tube is fit to perform on a GBC atomic absorption (AA) instrument and is the equivelant of GBC part 99-0059-00.
-
The Plateau Graphite Tube for Agilent® is pyrolytically coated, D6.9/4.9x24.9 mm and comes in a quantity of 10. It is fit to perform on atomic absorption (AA) instruments for Agilent® and is equivalent to Agilent® part 63-100011-00.
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
The Shimadzu Uncoated Standard Graphite Tube is fit-to-perform on a Shimadzu atomic absorption instrument and is equivalent to Shimadzu part 206-50587.
-
For the lowest possible detection limits, residual contaminant levels may not be low enough to meet your requirements. UltraClean graphite tubes offer unmatched analytical advantages for special applications such as the determination of extremely low traces of Na, Ca, Fe, Cr and Ni in ultra-clean…
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
Capillary Sample Tubes
PerkinElmerHigh Capacity Hydrocarbon Trap contains: 750 cc of preconditioned activated charcoal, Stainless steel body, ¼” brass compression fittngs with ferrules for installation, Maximum pressure 200 psi, Recommended ow rate up to 2 L per minute, Will remove hydrocarbon impurities (50 ppm or less) from inert…
-
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
-
The exceptionally uniform temperature distribution obtained with transverse heating significantly reduces or eliminates condensation of the sample matrix components and "memory" effects and improves the atomization efficiency for refractory elements. For improved characteristic mass with volatile…
-
The pyrolytically coated GBC Standard Graphite Tube will perform on a GBC atomic absorption instrument.
-
Hitachi Standard Tube, Uncoated
PerkinElmerThe Hitachi® Standard Graphite Tube uncoated, D7.8/4.7x30 mm and comes in a quantity of 10. The Standard Graphite Tube is fit to perform on a Hitachi® atomic absorption (AA) instrument. It is equivalent to Hitachi® part 180-7400.
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
The graphite tube, the heart of the graphite furnace, plays a vital role in the overall stability of an analysis. In order to assure stable analytical conditions from one atomization cycle to the next, and from graphite tube to graphite tube, all graphite parts - contacts, tubes and platforms -…
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
Needle Port Tube for Rheodyne Injection Valves, Model 9725/8125/7125/7725
-
The partition graphite tube for Agilent is pyrolytically coated, D6. 9/3. 9x24. 9 mm and comes in a quantity of 10. It has an extended life and is fit to perform on atomic absorption (AA) instruments for Agilent. The extended life partition graphite tube is equivalent to Agilent part 63-100012-EL.
-
Exhaust Tube 1.5 m for Titan MPS
PerkinElmerUsed with optional accessory for exhausting Titan MPS oven cavity in laboratories that do not have exhaust systems. Exhaust Tube 1. 5 m (ID 76 mm, OD 82 mm) (one included with Titan MPS)
-
Standard HGA Graphite Tubes with Lvov Groove
PerkinElmerThese HGA graphite tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. They are slotted to accept L'vov platforms, PerkinElmer part number B3001256. PerkinElmer has over four decades of experience in the design/development of graphite furnace systems and…
-
To extend the range of samples that you can analyze, we offer a wide range of sample holders. The rectangular and cylindrical long-path cell holders are ideal for sensitive measurements on dilute samples where the extra pathlength is important. For the chemist, the test-tube holder provides a…
-
The graphite tube, the heart of the graphite furnace, plays a vital role in the overall stability of an analysis. In order to assure stable analytical conditions from one atomization cycle to the next, and from graphite tube to graphite tube, all graphite parts - contacts, tubes and platforms -…
-
Standard Graphite Tubes for Shimadzu
PerkinElmerThese tubes are fit to perform on atomic absorption (AA) instruments for Shimadzu, are pyrocoated, have a 90° contact cone and are equivalent to Shimadzu part 206-50588. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the…
-
Quartz Tube with Au/Pt Gauze for Amalgamation System
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
These tubes are fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent/Varian part 63-100012-00. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the highest quality material guaranteed to…
-
ESI Needle (Tube)
PerkinElmerThe innovative separation probes and holders facilitate chromatography directly at the ionization source. This minimizes dead volume effects in the system for superior signal-to-noise ratios, enhanced sensitivity and narrower peaks. Compatible with LC/MS systems using Flexar SQ300 or AxION 2 TOF MS.