Stopcocks, Supplies
-
-
J.Young high-vacuum PTFE valve
MilliporeSigmaThe J. Young high-vacuum PTFE valve helps in controlling the atmosphere when using air-sensitive materials.Features: •PTFE piston with unique PTFE-sheathed elastomer O-ring seals •Grease-free glass-to-PTFE seals •High-vacuum to 10-6 torr
-
High Vacuum Single Oblique Stopcocks
ChemglassHollow plug, oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated via a separate hole in the plug which is not in the line of flow.
-
SYNTHWARE PTFE Double Oblique Bore Stopcocks
Kemtech AmericaStopcock, Double Oblique, PTFE, Synthware, Bore: 2 or 4mm available, Plug Size: 12.9/44 or 14.4/44 available, Stem OD: 8 or 10mm available.
-
Stopcocks
ChemglassFor replacement or construction of burets having a 1:5 PTFE stopcock plug. One arm is pulled to a delivery tip.
-
SYNTHWARE PTFE Stopcock Plugs, Metering Valve
Kemtech AmericaStopcock Plug, Metering, PTFE, Synthware, Bore: 2 or 4mm available, Plug Size: 11/25 or 15.2/30 availabe, with threaded PTFE needle valve for the fine control of flow through the bore of the stopcock plug.
-
-
Stopcock adapter, inner joint bottom, #7 top, stopcock side arm with PTFE plug and hose connection end. Supplied bushing and FETFE o-ring allows compression seal with thermometers, bleed tubes, etc. Will accomodate thermometers or tubes up to 7mm OD. F
-
KIMBLE® HI-VAC® Straight Valve with PTFE Plug, without Tip O-Ring, Bore Range 0…
DWK Life Sciences (Duran)The straight high-vacuum valve without tip O-ring is for use in vacuum applications up to 5×10-7torr. Designed with a precision external thread for fine control Valve can be used as a bleed up to ¹/2 turn Full open is at…
-
SYNTHWARE High Vacuum Valves, Three-Way
Kemtech AmericaHigh Vacuum Valve, Three Way, Synthware, Size: 0-8 or 0-12mm available, Side Arm OD: 9mm.
-
Stopcock, Polyethylene Miniature
DynalonMiniature Stopcocks. The low friction properties of high density polyethylene allows for easy turning of key which requires no lubricant, thus eliminating blockage of the bores with grease.
-
High Vacuum T-Bore Stopcocks
ChemglassSolid glass high vacuum stopcock with the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all…
-
HI-VAC® Straight Valves with Tip O-Rings and CTFE Plug
DWK Life Sciences (Kimble)This straight high-vacuum valve is for use in vacuum applications up to 5 x 10-7 Torr. Designed with a precision external thread for fine control Can be used as a bleed up to 1/2 turn Full open position is at 1-1/2 turns Primary seal is made with a FKM o-ring on a tapered seat …
-
S-Type Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 180° angle to one another and on the same plane.
-
Chem-Vac™ Glass Portion Only Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has a single sidearm sealed at a 90º angle to the barrel. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed. PLEASE NOTE: THE 0-20mm BORE SIZE IS OUR PREVIOUS STYLE CG-500 SERIES VALVE WITH COARSE THREAD.
-
Straight Bore Glass Plug Stopcocks
ChemglassSTOPCOCKS, STRAIGHT BORE, GLASS PLUGS, CAPILLARY ARMS, Similar to CG-400, but with the sidearms being made of capillary tubing having the same bore as the plug. Supplied complete with metal retaining clip CG-423. STOPCOCKS, STRAIGHT BORE, SCHLENK, GLASS PLUGS, This stopcock is especially…
-
Stopcock, High Pressure, Straight Bore
Ace GlassHigh pressure straight bore stopcock with solid plug.
-
Organic Chemistry Labset Kit
ChemglassORGANIC CHEMISTRY LABSET KITS, 19/22, Chemglass organic chemistry kits contain the basic glassware required to perform basic experiments such as vacuum or atmospheric distillation, reflux or reflux with addition, extraction as well as other organic experiments. Each kit contains the 14 glass items…
-
SYNTHWARE Glass T-Bore Stopcock Plugs
Kemtech AmericaReplacement Stopcock Plug, T-Bore, Glass, Synthware, Multiple Bore and plug sizes available, solid glass plug.
-
Stopcock Rotaflo 6 mm Ra
CorningThese high performance Rotaflo® 90° angle stopcocks can be adjusted from a 0 to 6mm bore opening and have 10mm O. D. sidearms. They are designed so that only chemically resistant Polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. …
-
Three-Way Polypropylene Stopcocks with Teflon Plug
Thermo Scientific NalgeneSimilar to 8652N30 series, but with three arms Stopcock has T-shaped bore for connecting any two or all three arms Offered in 2 mm and 4 mm bore sizes Arms serrated to take 1/4 to 3/8 inch tubing
-
-
PTFE Tip Valves
ChemglassPTFE TIPHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.
-
High Vacuum Straight Bore Stopcocks
ChemglassSolid glass high vacuum stopcock with the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all…
-
T-Bore Glass Plug Pressure Stopcocks
ChemglassT-BORE, Similar to CG-458, but with three stems sealed 90º apart. Solid glass plug has a "T" shaped bore so that any two or all three arms can be connected at one time. Plug is precision ground and hand-lapped with corresponding numbers on the barrel and plug. DOUBLE OBLIQUE BORE,…
-
Adapter, Stopcock and syringe port
Ace GlassStandard taper adapter with 8-425 gpi threaded top and a 2mm bore stopcock with a ptfe plug. Syringe port is supplied with a cap and septum.
-
Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.
-
Chem-Vac™ Glass Portion Only 180° Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 180º angle to one another and on the same plane. Heavy duty rounded coarse thread and precision formed tapered seat.
-
High Vacuum Double Oblique Stopcocks
ChemglassSolid glass high vacuum stopcock with the Chemglass constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all times and is easily…
-
SYNTHWARE High Vacuum Valve Plugs
Kemtech AmericaHigh Vacuum Valve Plug, Synthware, Size: 0-4, 0-8, and 0-12mm available, Stem Material: PTFE,O-rings Material: Viton.
-
Nalgene Polypropylene Straight Bore Stopcocks
Thermo Scientific NalgenePolypropylene with Teflon® TFE plug No lubrication required Offered in 2 mm and 4 mm bore sizes Arms are five-mm bore, serrated to take 1/4 to 7/16 inch rubber tubing
-
A 1:5 taper PTFE plug having a threaded needle valve to allow the adjustment of flow through the bore of the plug.