Standards, T, Chemicals
-
1000 ppm Tin for ICP
Inorganic VenturesInorganic Ventures' 1000 ppm Tin for ICP is a certified reference material set in a water (tr. nitric acid / HF) matrix for stability. This tin standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
TEST Turbidity (on Turner C3 sensor) 3000 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
Trace Metals Standard I
PerkinElmerUse as a daily control standard. Check the accuracy and precision of your analysis. Trace Metals I, Groundwater And Wastewater Pollution Control Check Standards. Volume 125 mL. Elements Concentration Aluminum 500 mg/L Vanadium 250 mg/L Arsenic 100 mg/L Beryllium 100 mg/L Chromium 100 mg/L…
-
The Ricca Chemical turbidity standard with a composition of 94.55% water, 4.95% hexamethylenetetramine and 0.50% hydrazine sulfate, is suitable for use as a disinfectant in water treatment process. It can be stored at a temperature of 15 to 30 degree C.
-
TEST Turbidity (AQ4500) EPA mode Turbidity (AQ4500) ISO Neph. mode Turbidity (AQ4500) IR Ratio mode Thermo Electron AQ4500 serial number Instrument calibration date Formazin Concentrate (
-
1000 ppm Thallium for AA
Inorganic VenturesInorganic Ventures' 1000 ppm Thallium for AA is a certified reference material set in a nitric acid matrix for stability. This thallium standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
spex® Trimethylamine Single-Component Organic Standard
SPEX CertiPrepSingle-component standards are available as stock items. They are supplied in methanol, or in another solvent, where appropriate. Additional solvents include methylene chloride, acetone, benzene, hexane, acetonitrile, THF, and water. Please inquire about the matrix for a particular item when…
-
1000 ppm Thallium for ICP
Inorganic VenturesInorganic Ventures' 1000 ppm Thallium for ICP is a certified reference material set in a nitric acid matrix for stability. This thallium standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
TEST Turbidity (Hach 2100N/AN and IS meters) 1.0 NTU Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material
-
Assurance® Grade Thulium Single Element Inorganic Standards
SPEX CertiPrepThe Assurance® 1000 ppm thulium/2% HNO3 standard is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. This single element inorganic standard is suitable for use in atomic…
-
AMCO Clear® Turbidity Standard, 100 NTU for Horiba W-22
GFS ChemicalsTEST Turbidity (Horiba W-22) 100 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
AMCO Clear® Turbidity Standard, 3.0 NTU
GFS Chemicals1. Turbidity 3.0 NTU +/- 0.03 2. Absorbance at 455nm (100mm pathlength) 3. Lot Number of Baseline Material
-
TEST Turbidity (AQ4500) EPA mode Turbidity (AQ4500) IR Ratio mode Thermo Electron AQ4500 serial number Instrument calibration date Formazin Concentrate (4000 NTU) lot number Formazin chec
-
AMCO Clear® Turbidity Standard, 400 NTU
GFS ChemicalsTEST Turbidity 400 NTU +/- 4 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
AMCO Clear® Turbidity Standard, 10 NTU for Horiba W-22
GFS ChemicalsTEST Turbidity (on Horiba W-22) 10 NTU Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material
-
Organic Carbon Standard, 1 mL = 5 mg C, 5000 ppm C for Total Organic Carbon (TOC).
-
AGI ICP-MS Tuning Solution 1
Inorganic VenturesInorganic Ventures' AGI ICP-MS Tuning Solution 1 is a 125 mL certified reference material set in a nitric acid matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . To obtain COA…
-
10,000 ppm Tellurium for ICP
Inorganic VenturesInorganic Ventures' 10,000 ppm Tellurium for ICP is a certified reference material set in a hydrochloric acid matrix for stability. This tellurium standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
For Endress and Hauser, Reagecon Diagnostic and Hach 2100 AN IS turbidimeters. TEST Turbidity (on Hach 2100 AN/IS) 4000 NTU Absorbance at 455 nm (10mm pathlength) 3.26-3.50 Lot Number of Baseline Material
-
spex Assurance® Grade Trace Metals with Mercury
SPEX CertiPrepStandards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only…
-
10,000 ppm Tungsten for ICP
Inorganic VenturesInorganic Ventures' 10,000 ppm Tungsten for ICP is a certified reference material set in a nitric acid (tr. hydrofluoric acid) matrix for stability. This tungsten standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year …
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.02 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
1000 ppm Tin for ICP
Inorganic VenturesInorganic Ventures' 1000 ppm Tin for ICP is a certified reference material set in a hydrochloric acid matrix for stability. This tin standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
spex® Toluene Single-Component Organic Standard
SPEX CertiPrepSingle-component standards are available as stock items. They are supplied in methanol, or in another solvent, where appropriate. Additional solvents include methylene chloride, acetone, benzene, hexane, acetonitrile, THF, and water. Please inquire about the matrix for a particular item when…
-
AMCO Clear® Linear Calibration Kit, 0.0/0.1/0.2 NTU
GFS ChemicalsKit contains 0.0, 0.1, 0.2 NTU primary standards to be used to calibrate and verify instrument's linearity in the 0.0 to 0.2 NTU range.
-
TEST Turbidity (on HF Micro 1000) 10,000 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
UN No.: 1789 pH: (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.034 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
Other Notes: This certified reference material (CRM) is produced and certified in accordance with ISO Guide 34:2009 and ISO/IEC 17025:2005. All information regarding the use of this CRM can be found on the certificate of analysis. Legal Information: Trace CERT is a registered trademark of…
-
-
1000 ppm Tin for AA
Inorganic VenturesInorganic Ventures' 1000 ppm Tin for AA is a certified reference material set in a water (tr. nitric acid / HF) matrix for stability. This tin standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
1000 ug/mL Total Cyanide
Inorganic VenturesInorganic Ventures' 1000 ug/mL Total Cyanide is a 20 mL certified reference material set in a water matrix for stability. This cyanide standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
Matrix: H2O Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility