Standards, S, UN3264, 100 mL
-
Arsenic 10,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 10,000 +/- 100 ug/ml Matrix: <5% HNO3 NIST Traceable
-
Strontium, plasma standard solution, Sr 1,000µg/ml
BeanTown ChemicalEC No: 231-714-2 MDL No: MFCD00134060 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid, Sr(NO3)2 in 5% HNO3 Density (g/mL): 1.01
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
Chromium 10,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 10,000 +/- 100 ug/ml Matrix: <5% HCl NIST Traceable
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.02 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
VeriSpec™ Multi-Element Calibration Standard 2A
Ricca Chemical10 ppm: Ag, Al, As, Ba, Be Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, Hg, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Se, Sr, Tl, U, V, Zn Matrix: 5% HNO3 Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
VeriSpec™ Terbium Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Silicon, plasma standard solution, Si 1,000µg/ml
BeanTown ChemicalMDL No: MFCD00085311 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid, Si in 5% HNO3
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
VeriSpec™ Nickel Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
Common and Transition Elements Multielement Standard
GFS ChemicalsMatrix: 5% nitric acid with trace tartaric acid. Ag 100 ug/ml Al 100 ug/ml As 100 ug/ml Ba 100 ug/ml Be 100 ug/ml Bi 100 ug/ml Ca 1000 ug/ml Cd 100 ug/ml Cr
-
Ricca Zirconium ICP Standard
Ricca ChemicalThe Ricca Chemical zirconium ICP standard with a composition of 94.30% water, 3.56% zirconyl chloride octahydrate and 2.14% hydrochloric acid, is suitable for use in wide range of industrial applications. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 10, 000 ppm Ag in 5% HNO3 Silver ICP Standard
Ricca ChemicalThe Ricca Chemical silver ICP standard with a composition of 93.43% water, 5.06% nitric acid and 1.51% silver nitrate, is suitable for research and laboratory use. It can be stored at a temperature of 15 to 30 degree C.
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
VeriSpec™ ICP Internal Standard 6
Ricca Chemical100 ppm: Bi, In, Li 6+ , Sc, Tb, Y Matrix: 5% HNO3 Min: >= 99.5 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Nexion ICP-MS Calibration Standard for Set Up 8
Ricca Chemical1 ppb: Be, Ce, Fe, In, Li, Mg, Pb, U Matrix: 2% HNO3/ 5% HCl Min: >= .000995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Aluminum 1000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 5% nitric acid NIST Traceable
-
VeriSpec™ Mercury Standard for ICP, 1000 ppm in 10% HNO3
Ricca ChemicalMatrix: 10% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Copper Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
VeriSpec™ Manganese Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Potassium 1,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 5% Nitric acid NIST Traceable
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
VeriSpec™ Multi-Element Standard 30
Ricca Chemical1000 ppm Ca; 100 ppm As, B, Be, Fe, Se, Zn; 10 ppm Ag, Al, Ba, Bi, Cd, Co, Cr, Cu, Ga, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Rb, Sr, Te, Tl, U, V Matrix: 5% HNO3 Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34
-
Ricca Selenium ICP Standard
Ricca ChemicalThe Ricca Chemical selenium ICP standard with a composition of 93.98% water, 5.06% nitric acid and 0.96% selenium, is suitable for use in wide range of industries and in research laboratories. It can be stored at a temperature of 15 to 30 degree C.