Solutions, S, Cubitainer®, Solutions
-
Sulfuric Acid 0.01N
ExaxolThe Exaxol 0.01N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Silver Nitrate, 0.10N
chemForce® (powered by Thomas Scientific)Harmonized #: 2843.21.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.01 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Concentration: 1.2% w/v Composition: Water 98.77%, Sodium Tetraphenylboron 1.19%, Sodium Hydroxide 0.04% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: >7 Solubility Information: Miscible …
-
Ricca Simulated Gastric Fluid (without Pepsin)
Ricca ChemicalThis medium contains hydrochloric acid and sodium chloride, without Pepsin, and has a pH of 1.2. Although the medium addresses many of the qualities of gastric juice, there are some aspects that could be optimized.
-
Ricca 25% v/v Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Ricca 25% (w/v) (250 g/L) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Sodium Thiosulfate 0.0394 N
ExaxolThe Exaxol 0.0394N sodium thiosulfate features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25…
-
Ricca 1% (w/v) Starch Indicator
Ricca ChemicalStarch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…
-
TitriPUR® Silver nitrate solution
MilliporeSigmac(AgNO₃) = 0.1 mol/l (0.1 N) Titripur(R) Reag. Ph Eur,Reag. USP Molecular Formula: AgNO3 Molecular Weight: 169.87 Linear Structural Formula: AgNO3 MDL Number: MFCD00003414 Density: 1.01 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck…
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
Ricca 5% (w/v) (50 g/L) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Sulfuric Acid 0.250N
ExaxolThe Exaxol 0.25N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Sodium Hydroxide 0.500N
ExaxolThe Exaxol 0.5N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Ricca 0.04% (w/v) Sulfo Orange Indicator
Ricca ChemicalThe Ricca Chemical sulfo orange indicator with a composition of 99.96% water and 0.04% sulfo orange, is suitable for use in titrations. It can be stored at a temperature of 15 to 30 degree C.
-
Starch Indicator 0.5% w/v
ExaxolThe Exaxol 0.5% w/v starch indicator is mainly used for redox titrations, which involves iodine solutions. It turns to blue or violet color when iodine is present in the solution. It is mercury free and is preserved with salicylic acid. Application: For Laboratory use only Preserved with…
-
Sulfuric Acid 0.1N
ExaxolThe Exaxol 0.1N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Scrubber Solution, Volumetric
Reagents®Composition: Water 71.41%, Sodium Citrate Dihydrate 24.98%, Citric Acid Monohydrate 3.61% Density: 1.14 Color: Colorless to faint yellow liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 3 Months Storage: Ambient DOT: NOT REGULATED.
-
Titripur® Sodium Thiosulfate Solution
MilliporeSigmaSynonyms: Antichlor Density: 1.01 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
Ricca Saturated 32.5% (w/v) Sodium Chloride
Ricca ChemicalThe Ricca Chemical sodium chloride with a composition of 72.92% water and 27.08% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 9% w/v Sodium Chloride
Ricca ChemicalSodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
-
Sulfuric Acid 0.5N
ExaxolThe Exaxol 0.5N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca 1% (w/v) (10 g/L) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 20% (v/v) Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Ricca 2% w/v Starch Indicator
Ricca ChemicalStarch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…
-
Ricca Analytical Reagent Grade 40% (w/w) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Sulfuric Acid 4.0N
ExaxolThe Exaxol 4N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca 30% (w/v) Sodium Chloride
Ricca ChemicalSodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
-
The Ricca Chemicals Sorensen's sodium phosphate buffer is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy cubitainer that endures heavy and rigorous usage.
-
Sodium Chloride 0.9% w/v
ExaxolThe Exaxol 0.9% sodium chloride features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Aqueous isotonic normal saline solution
-
Ricca 20% (w/w) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Sodium Hydroxide 1.00N
ExaxolThe Exaxol 1N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Sodium Thiosulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 97.40%, Sodium Thiosulfate Pentahydrate 2.46%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 …