Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.

We offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…

The Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

Silver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.

The Ricca Chemical soap solution helps in minimizing the surface tension of water thus making it ideal to wet and clean dirty surfaces. Soap solution is derived from fatty acids and is used extensively for cleansing and lubricating products.

The Ricca Chemical synthetic fresh water with a composition of 100.00% water, 100.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. …

415 ppm TDS as Fresh Water Ions, 160 - 180 mg/L Hardness as CaCO3

Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

The Ricca Chemical saccomanno collection fluid is perfect to use for the fixation process of cytology specimens including fine needle aspirates, urine, sputum and bronchial washings and pleural and peritoneal fluids. Fixative and preservative for sputum samples

The Ricca Chemical sodium hydroxide dilution solution with a composition of 99.84% water and 0.16% sodium hydroxide, is suitable for use in manufacturing soaps and detergents. It is also used in rayon, paper, dye, pharmaceutical and petroleum industries. It can be stored at a temperature of 15 to…

The Ricca Chemical starch indicator with a composition of 99.63% water, 0.30% starch, soluble and 0.07% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical synthetic fresh water with a composition of 99.91% water, 0.04% sodium bicarbonate, 0.02% magnesium sulfate, 0.02% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. Very…

207 ppm TDS as Fresh Water Ions, 80 - 100 mg/L Hardness as CaCO3

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sodium phenate solution with a composition of 89.04% water, 8.05% phenol and 2.91% sodium hydroxide, is suitable for use as an antiseptic and as a disinfectant. It is also used in organic synthesis. It can be stored at a temperature of 15 to 30 degree C. Application: For Ammonia…

The Ricca Chemical synthetic sea water is composed of 95.87% water, 2.39% sodium chloride, 1.08% magnesium chloride hexahydrate, 0.15% calcium chloride dihydrate, 0.07% potassium chloride, 0.02% sodium bicarbonate, 0.01% potassium bromide, 0.00% strontium chloride hexahydrate, 0.00% boric acid,…

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sodium citrate with a composition of 96.29% water and 3.71% sodium citrate dihydrate, is mainly used in the treatment of upset stomach, kidney stones and acidic urine. It can be stored at a temperature of 15 to 30 degree C.

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium acetate, CH3COONa, also abbreviated NaOAc, is the sodium salt of acetic acid. This colorless deliquescent salt has a wide range of uses.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP). Application: Suitable for Orsat Gas Analysis

The Ricca Chemical 1 Liter Scott's bluing reagent is used for the preparation of nuclear hematoxylin stain in cytology and histology. Application: Bluing Agent For Nuclear Hematoxylin Stain

The Ricca Chemical sodium hypochlorite solution with a composition of 94.00% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C. 6% available chlorine

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).