Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.

We offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

The Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations

Silver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.

The Ricca Chemical soap solution helps in minimizing the surface tension of water thus making it ideal to wet and clean dirty surfaces. Soap solution is derived from fatty acids and is used extensively for cleansing and lubricating products.

The Ricca Chemical synthetic fresh water with a composition of 100.00% water, 100.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. …

415 ppm TDS as Fresh Water Ions, 160 - 180 mg/L Hardness as CaCO3

The Ricca Chemical sodium azide with a composition of 95.13% water and 4.87% sodium azide, is suitable for use in clinical and research laboratories. It can be stored at a temperature of 15 to 30 degree C.

Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

The Ricca Chemical synthetic fresh water with a composition of 99.91% water, 0.04% sodium bicarbonate, 0.02% magnesium sulfate, 0.02% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. Very…

207 ppm TDS as Fresh Water Ions, 80 - 100 mg/L Hardness as CaCO3

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sodium phenate solution with a composition of 89.04% water, 8.05% phenol and 2.91% sodium hydroxide, is suitable for use as an antiseptic and as a disinfectant. It is also used in organic synthesis. It can be stored at a temperature of 15 to 30 degree C. Application: For Ammonia…

The Ricca Chemical silver nitrate with a composition of 90.78% water and 9.22% silver nitrate, is used to treat skin infections of wounds and burns. It can be stored at a temperature of 15 to 30 degree C.

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP). Application: Suitable for Orsat Gas Analysis

The Ricca Chemical sodium hypochlorite solution with a composition of 94.00% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C. 6% available chlorine

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl. Application: For use as Blood Bank Saline

The Ricca Chemical synthetic fresh water with a composition of 99.99% water, 0.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. Soft…

The Ricca Chemical sodium hypochlorite solution with a composition of 94% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical sodium hydroxide is widely used in biochemistry industry and is useful for neutralization of acids. It is a basic solution and has the ability to raise pH of chemical solutions. This neutralization agent is perfect for use in the chemical industry, paper making, petroleum…

The Ricca Chemical sodium chloride with a composition of 72.92% water and 27.08% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.

Sodium carbonate refers to a family of inorganic compounds with the formula Na2CO3?, where x can range from 0 to 10. All forms are white, odorless, water-soluble salts that yield alkaline solutions in water. Historically, it was extracted from the ashes of plants grown in sodium-rich soils.

The Ricca Chemical sodium standard with a composition of 100.00% water and 0.00% sodium chloride, acts as a reducing agent as well as a catalyst in ion analysis. It is used in atomic absorption spectrometry. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical sodium hydroxide with a composition of 99.73% water and 0.27% sodium hydroxide, is suitable for use in manufacturing soaps and detergents. It is also used in rayon, paper, dye, pharmaceutical and petroleum industries. It can be stored at a temperature of 15 to 30 degree C.

Sodium thiocyanate is the chemical compound with the formula NaSCN. This colorless deliquescent salt is one of the main sources of the thiocyanate anion. As such, it is used as a precursor for the synthesis of pharmaceuticals and other specialty chemicals.