Solutions, P, 1 L
-
"Poly(ethyleneimine) solution, 50 % (w/v) in H2O"
MilliporeSigmaSynonyms: Ethyleneimine polymer solution; PEI CAS No.: 9002-98-6 Application: PEI cellulose in small columns will separate cyclic nucleotides from related compounds at the same electrolyte concentration that is used for thin layer chromatography on PEI cellulose-coated plates. …
-
Potassium Iodide Iodate, 0.0125N
chemForce® (powered by Thomas Scientific)Harmonized #: 3822.00.0002 5090 Shelf Life (months): 18 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
The LabChem 7 pH phosphate buffer in liquid form, is miscible with water. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 0.0125 M phenylarsine oxide is completely non-flammable and dissolves easily in water. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Ricca 2 Normal Potassium Hydroxide
Ricca ChemicalPotassium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Potassium Hydroxide Solution, 0.01 N in Isopropanol
GFS ChemicalsKOH CAS#: 1310-58-3 F.W.: 56.11 0.01 mol/L
-
-
The Exaxol 0.1 N potassium hydroxide in IPA, is mainly used in preparing soaps. It is used in manufacturing insecticides, disinfectants and pesticides. Potassium hydroxide is suitable for use in electroplating and lithography processes. It is also used for paint and varnish removal. Application:…
-
Ricca Potassium Permanganate Standard
Ricca ChemicalThe Ricca Chemical potassium permanganate standard with a composition of 99.91% water and 0.09% potassium permanganate, is suitable for use as a antibacterial and antifungal agent. It can be used for research purposes in chemical laboratories. It can be stored at a temperature of 15 to 30 degree C.
-
Perchloric Acid, 0.055N, Standardized
Reagents®Concentration: 0.055N in N-Propanol Composition: 1-Propanol 99.03%, Perchloric Acid 0.68%, Water 0.29% Density: 1.05 Melting Point: -127°C Color: Colorless to light yellow liquid Physical State: Liquid Flash Point: 23°C pH Range: 1.3 Solubility Information: Miscible Shelf Life: 9…
-
The LabChem 10N potassium hydroxide in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Potassium ferricyanide is the chemical compound with the formula K3[Fe(CN)6]. This bright red salt contains the octahedrally coordinated [Fe(CN)6]³? ion. It is soluble in water and its solution shows some green-yellow fluorescence. It was discovered in 1822 by Leopold Gmelin. Potassium ferrocyanide…
-
The LabChem 0.00564N phenylarsine oxide in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 1.0N potassium permanganate in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Perchloric Acid, 0.10N
Reagents®Concentration: 0.1N in P-Dioxane Composition: Dioxane 98.64%, Perchloric Acid 0.95%, Water 0.41% Boiling Point: Approximately 103°C Density: 1.04 Melting Point: 12°C Color: Colorless to light yellow liquid Physical State: Liquid Flash Point: 12°C pH Range: 1 Solubility Information:…
-
The LabChem 0.0021 M potassium biiodate is completely non-flammable and dissolves easily in water. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
The Exaxol phenolphthalein is suitable for use in acid-base titrations as an indicator. It is also used in the treatment of constipation. Application: For Laboratory use only
-
The LabChem 0.1N in methanol potassium hydroxide in liquid form, is miscible with water and soluble in ethanol. It is highly flammable in liquid as well as vapor and has characteristic alcohol odor. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 0.5% In 50% ethanol phenolphthalein in liquid form, is soluble in water, methanol and acetone. It is flammable in liquid as well as vapor and has characteristic odor. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 30% w/v potassium hydroxide in liquid form, is non-flammable and has great shelf life. Application: For Laboratory and Manufacturing Use Only
-
The LabChem potassium persulfate for mercury and metals exhibits good solubility in most substances and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 0.01 M potassium permanganate is completely non-flammable and dissolves easily in water. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
TitriPUR® Potassium hydroxide solution in ethanol
MilliporeSigmaMelting Point: -114.5 C (ethanol) Density: 0.85 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
Ricca Potassium Chloride
Ricca ChemicalThe Ricca Chemical potassium chloride with a composition of 80.26% water, 19.74% potassium chloride and 0.00% silver nitrate, is suitable for use in medicine and scientific applications. It can be stored at a temperature of 15 to 30 degree C. Saturated with silver chloride, electrode filling solution
-
Ricca 50% (w/w) Potassium Fluoride
Ricca ChemicalThe Ricca Chemical potassium fluoride with a composition of 69.17% water and 30.83% potassium fluoride, is suitable for use as a fluoridating agent, preservative and insecticide. It can be stored at a temperature of 15 to 30 degree C.
-
Potassium Thiocyanate 0.100N
ExaxolThe Exaxol 0.100 N potassium thiocyanate is mainly used as a bleaching agent and as a disinfectant. It is used to resist corrosion at steel joints. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to within ±0.2% of stated value
-
Ricca Phosphate Buffer
Ricca ChemicalThe Ricca Chemical phosphate buffer with composition of 82.32% water, 10.45% potassium phosphate dibasic and 7.23% potassium dihydrogen phosphate is suitable for use in biological research and experiments. It can be stored at a temperature of 15 to 30 degree C. Application: For Phenols
-
Ricca 1% (w/v) Alcoholic Phenolphthalein TS/RS
Ricca ChemicalThe Ricca Chemical phenolphthalein TS/RS with a composition of 94.05% ethyl alcohol, 4.70% methyl alcohol and 1.25% phenolphthalein, is suitable for use in medical applications. It can be used as a reductometric standard in titrations. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca Saturated Potassium Chloride, Approximately 4 Molar
Ricca ChemicalPotassium chloride is a metal halide salt composed of potassium and chlorine. It is odorless and has a white or colorless vitreous crystal appearance. The solid dissolves readily in water, and its solutions have a salt-like taste. Potassium chloride can be obtained from ancient dried lake deposits.
-
LabChem 5% w/v Potassium Iodide
LabchemThe LabChem 5% w/v potassium iodide in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Ricca Phosphoric Acid
Ricca ChemicalThe Ricca Chemical 20% v/v phosphoric acid is a very useful chemical compound that is used for a variety of products including fertilizers, detergents and other household cleaning products. It can alsi be used as a food preservative in soft drinks and processed food.