Solutions, C, Solutions
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
-
Orion™ Conductivity Standards
Thermo Scientific OrionPerform virtually any electrochemistry analysis with Thermo Scientific™ Orion™ Conductivity Standards and Solutions. Choose from a complete selection of conductivity accessories including conductivity standards and TDS (total dissolved solids) standards. All conductivity standards are…
-
Ricca 10, 000 ppm Cu Copper Standard
Ricca ChemicalThe Ricca Chemical copper standard is used to measure and detect the presence of sugar in chemical samples. It is also used in the process of water purification and as an agricultural poison.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Conductivity Standard, 1413 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Conductivity Standard KCl 1000 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 99.95%, Potassium Chloride 0.05% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient Packaging Type: Poly Natural…
-
Potassium Chloride Conductivity Standard, 50 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
SIGMA Citrate-phosphate-dextrose solution with adenine,
MilliporeSigmaSynonyms: CPD-A Storage Temperature: 2-8°C Biochem/physiol Actions: Useful anticoagulant for whole blood Recommended anticoagulant: whole blood ratio is 1:9
-
Copper Sulfate, 1.6% (v/v), Volumetric
Reagents®Concentration: 1.6% in 0.4% H2SO4 Composition: Water 97.72%, Copper Sulfate Pentahydrate 1.58%, Sulfuric Acid 0.70% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Blue liquid Physical State: Liquid pH Range: 1 Solubility Information: Miscible …
-
NIST Standard Solutions
Accent Control SystemsAll Myron L instruments are factory calibrated with Standard Solutions of known conductivity/TDS value and (when appropriate) with pH buffer values 4, 7 and 10. These solutions and buffers are traceable to the U.S. Government’s National Institute of Standards and Technology. Periodic…
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Ricca Calcium Hydroxide TS (Saturated Aqueous Solution)
Ricca ChemicalCalcium hydroxide saturated solution in water USP Test Solution (TS).
-
Ricca Potassium Chloride Reference Solution D
Ricca ChemicalThe Ricca Chemical 500 mL potassium chloride reference solution D with composition of 92.90% water and 7.10% potassium chloride is suitable for use in electrolytic conductivity measurements and laboratory routines. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca Potassium Chloride
Ricca ChemicalThe Ricca Chemical 10 Liter potassium chloride with composition of 99.93% water and
-
Pierce™ FlexMix™ Calibration Solution
Thermo ScientificThe Thermo Scientific Pierce FlexMix calibration solution is a mixture of 16 highly pure, ionizable components (mass ranges: 50 to 3000 m/z) designed for both positive and negative ionization calibration using Orbitrap Tribrid series 3.1 Instrument Control Software (or later) for Orbitrap Fusion,…
-
Conductivity Standard KCl 2000 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 99.89%, Potassium Chloride 0.11% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient Packaging Type: Poly Natural…
-
The LabChem 0.02 M copper sulfate is non-flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Conductivity Standard 10,000 µS/cm
Reagents®Composition: Water 99.42%, Potassium Chloride 0.58% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 18 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Conductivity Standard KCl 200 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 99.99%, Potassium Chloride 0.01% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient Packaging Type: Poly Natural…
-
LabChem 10% w/v Copper Sulfate
LabchemThe LabChem 10% w/v copper sulfate in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Conductivity Standard KCl 10,000 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 99.42%, Potassium Chloride 0.58% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient Packaging Type: Poly Natural…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 10 g/L Calcium Chloride
Ricca ChemicalThe Ricca Chemicals 10 g/L calcium chloride is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Determination of Salts in Crude Oil
-
Conductivity Standards
HamiltonHamilton offers conductivity standards whose stability of ±1% is guaranteed over a lifetime of up to 3 years. They can be used repeatedly under the condition that the bottle is not left open for more than 1 hour in total.
-
-
CON-TROL 500, 500 mOsm Reference Solution
Precision SystemsThe Precision Systems con-trol 500, 500 mosm reference solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Chlorotrimethylsilane solution, 1.0 M in THF
MilliporeSigmaSynonyms: Trimethylchlorosilane CAS Number: 75-77-4 Formula: C3H9ClSi Formula Weight: 108.64 Linear Formula: (CH3)3SiCl MDL No.: MFCD00000502 Density: 0.88 g/mL at 25 C Beilstein Registry Number: 1209232 UNSPSC Code: 12352000
-
-
Ready to use solution. Contains mercuric thiocyanate and ferric nitrate. Preserved with 20mg/L of BRIJ-35.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.