Samplers, PerkinElmer, Supplies
-
0.25mm i.d. Carbon fiber support SC-autosampler probe for ST nebulizers, 100 µL/min uptake rate, 150 cm capillary.
-
TFM Pressure Seal for High Pressure 100 mL (100 Bar) Digestion Vessels for Titan MPS 16 Position Microwave Sample Preparation Systems. Made of TFM Quantity: set of 5
-
The PerkinElmer Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler with 60 locations for 15 mL solution containers.
-
SC Autosampler Probe 1.0mm ID - gray marker
PerkinElmerPFA FAST sample probe for high-flow SC-FAST valve, carbon fiber supported. 1.00 mm i.d. (gray), 100 cm
-
Forming tool for pressure seals used with High Pressure 100 mL (100 Bar) Digestion Vessels for Titan MPS 8 Position Microwave Sample Preparation Systems. Forms 1 seal.
-
Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.
-
FAST Upgrade Module
PerkinElmerThe PerkinElmer upgrade module is compatible to use with low flow valve. Application: For Apex High Flow Valve
-
PFA-100 Apex MicroFlow Nebulizer, 90-150 µL/min
PerkinElmerPFA-100 Apex MicroFlow Nebulizer with Ultem manual sampling probe, 90-150 µL/min, 80cm capillary.
-
16 Position turntable system with Standard 75 mL (40 Bar) Digestion Vessels (complete assembly) for Titan MPS™ 8 and 16 Position Microwave Sample Preparation Systems. 16 Standard 75 mL (40 Bar) Digestion Vessels made of TFM and lids Rupture Disc Vessel Cap (Without DPC) 16 Position…
-
Glass Chamber with 24 Positions
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…
-
Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These fittings grip the tubing in two locations for a more reliable connection. Rheodyne Sample Loops are made of natural PEEK. This means no dye leaching into your sample. Like metal loops, the size designations of PEEK loops…
-
Titan MPS™ Digestion Vessels Cap
PerkinElmerThe Titan MPS™ digestion vessels cap consists of a DPC pressure sensor and can be used with 16-position microwave sample preparations. TFM construction of the cap ensures durability.
-
Autosampler Stainless Steel Sample Probe
PerkinElmerThe stainless steel sample probe features a screen tip and is used in oils applications. The probe includes the capillary tube fitting, although doesn't include capillary tubing.
-
-
HF Sample Introduction Kit for NexION
PerkinElmerKit Includes: 02506516, Tygon Tubing PER FT/0.3M, quantity 8 09210011, O-Ring 0.239ID 0.070WD TEFLON, quantity 1 09210012, O-Ring 0.364ID 0.070WD TEFLON, quantity 1 09908265, Nebulizer Polypropylene Tubing 10 FT AA, quantity 1 09908587, Black/Black 0.76mm i.d. PVC Pump Tubing pk. 12, quantity…
-
New sampling probe for PerkinElmer AS-90/90A/90 Plus/91/93 Plus Autosampler, 0. 6mm Inner Diameter. This probe cannot be used withAS-90s, which still have older sampling probe holder. Optional corrosion-resistant probe, suitable for inorganic acids and most organic solvents, except for NMP.…
-
-
Consists of stainless steel sampling probe and screw fitting (P/N B3000152), and flame capillary tubing assembly (P/N B3000157). Replaces P/N B0196963.
-
81 Position Sample Tray for LC Autosampler
PerkinElmerSample Tray for PerkinElmer Series 200 Autosampler. Dilution with tank. Includes: PerkinElmer Part No. N2930044 81-Position Tray and PerkinElmer Part No. B0505677 Glass Diluent Tank.
-
30ml Polypropylene, 25mm x 95mm (500 PER KIT)
PerkinElmer30ml Polypropylene, 25mm x 95mm (500 PER KIT)
-
Fruit & Vegetables EN 15662 Clean-up Kit, 15 mL
PerkinElmerQuEChERS kit with clean-up materials packed in ready-to-use tubes supporting EN 15662 methodology. Volume: 15 mL Quantity: 50 MgSO4 1 : 900 mg PSA 2 : 150 mg 1 MgSO4 removes excess water 2 PSA removes sugars, fatty acids, organic acids, and anthocyanine pigments
-
SPB 50-24, 24 position 50 mL 115/230 V
PerkinElmerGraphite blocks are PTFE-coated to resist aggressive corrosive attack for guaranteed long life in harsh laboratory environments. Our sample blocks operate with either a SPB Digital Controller or SPB Touch Controller*. Please select a controller below and the appropriate Start Up Kit* which includes…
-
The size designations of stainless steel loops are nominal. Theactual volumes can differ from the theoretical designations becauseof the ± 0.025 mm (0.001") tolerance of the metal tubingbore. Accuracy of large metal loops (1.0 mm, 0.040" bore) is about±5%, intermediate loops (0.5 mm, 0.020" bore)…
-
-
Size: 0.50 mm i.d.(orange), 150 cm
-
-
There are two 6-foot pieces of tubing included in the kit. For use with oils applications.
-
Microtiter plate, 48 position, (7.5mL) (Qty 3)
PerkinElmer1 Pk (3 ea) 48 well, 7. 5 mL microtiter plate, square well, pyramid bottom. Microtiter plates are ideal for micro volume applications such as storage and sample transfer.
-
-
SPB Probe 6 for 50mL Tubes
PerkinElmerThe SPB Probe provides direct control and monitoring of actual sample temperature via a corrosion-resistant, PFA-coated temperature probe. Available with different holders in a 6"configuration for use with 50 and 100 mL DigiTUBE®s. Each probe is supplied with 5 Probe Watch Glasses and a probe holder.
-
225 Position Sample Tray LC Autosampler
PerkinElmerSample Tray for PerkinElmer Series 200 Autosampler. Microvials/high throughput. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase. Use of these parts will ensure that your sample operates with maximum precision and accuracy.
-
Internal Standard addition tee, used with ST nebulizer 0.15