Reaction Vessels, Chemglass, Supplies
-
Jacketed Filter Vessel Body Only
ChemglassCylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with 1"; beaded pipe or 30mm Tool-Free™;…
-
Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…
-
Unique baffle system for benchtop process reactors from 300mL to 5L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. PTFE jacketed stainless steel provides excellent strength and chemical durability. Features: Adjustable Rectangular…
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space Perfluoro O-Rings on Tip and Plunger. …
-
1L ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space Perfluoro O-Rings on Tip and Plunger The…
-
Similar to CG-1924, but with a choice of our NEW CG-911-A 0-14mm sidearm valve, a straight through 0-12mm CG-510 valve or 0-20mm CG-511 sidearm valve. All valves are designed to seal flush with the bottom of the flask avoiding the dead space normally associated with stopcock drains. This feature…
-
This fluid driven spray ball gives nearly 360° spray coverage and is a convenient way to clean cylindrical reaction vessels from 300mL to 5L without dismantling the entire set-up. It can also be used as a wall-wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Two side necks are vertical and two necks have a 10°; degree angle. Angled side neck is designed for use with CG-1235/CG-1235-B series angled distillation adapters. Lid has a flat ground surface allowing it to be greased or used with…
-
Beaded pipe to sanitary fitting adapter connects to the 1" beaded pipe side arm of CG-1968-Q zero dead space drain valve. Approximate overall length of adapter is 2" (52mm). NOTE: Requires a CG-1968-66 beaded coupling.
-
Low profile five neck vessel lid to fit CG-1920 through CG-1936 vessels. This low profile lid reduces overall height and provides less surface area for condensation. Two side necks are vertical and Two necks have a 10 angle. Angled side neck is designed for use with CG-1235/CG-1235-B series angled…
-
Reaction Vessel Lid, S.S., 400mm, 7-Neck
ChemglassReaction vessel lid is constructed of 1/4"; thick #316 S.S. with a 1/8"; thick PTFE gasket underneath. The only material exposed to the reaction is PTFE. Lid has seven openings that accept 45/50 outer PTFE inserts. One neck is a bulk addition port is 80mm reaction flange with o-ring…
-
Similar to CG-1860, but with the addition of a Luer inner joint below the 2mm PTFE stopcock.
-
Stirrer Bearings, PTFE, 25.4mm
ChemglassGrease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having a 45/50 inner joint, a saddle o-ring, a bushing with compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE…
-
500mL ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
Unjacketed Filter Vessel Body Only
ChemglassCylindrical filter reaction vessel body constructed with a top flange having a groove formed in the sealing surface of the flange and a flat ground flange on the bottom. Bottom flange is for connection to a CG-1949-F/CG-1959-F style filter bases. Top flange is compatible with any of the lids…
-
100L Squatty Glass Reactor System
Chemglass100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More…
-
Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
Our unjacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
Cylindrical shaped tube useful for storage or simple reactions. Tube has a standard taper outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.
-
Features Auto-Stop When Opening The Valve Anodized Aluminum Control Knob Zero Dead Space Perfluoro O-Rings On Tip And Plunger “Zero Dead Space” flush bottom valve is designed to prevent solids from collecting in the bottom of the vessel. The PTFE® drain valve…
-
50L Squatty Glass Reactor System
Chemglass50L Squatty, Low Profile, glass reactor system with 400mm flange, on our innovative Kwik Mount support frame. Complete 50L Squatty Reactor System Features: More Clearance: 50L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The…
-
PTFE six blade turbine style agitator for use with reactor stirrer shafts. Shaft opening is drilled straight through to permit positioning at any height on the shaft.
-
Our unjacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
Bill-Board™ Solid-Phase Syntheses Sets
ChemglassThe Bill-Board™ set has been designed to simplify and expedite multiple, solid-phase syntheses. Up to 6 reactions can be conducted simultaneously in fritted glass reaction vessels. The Bill-Board™ equipment keeps the solid-phase reactions organized in a grid (for potential combinatorial…
-
Reaction Vessels, Cylindrical
ChemglassCylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T, for o-ring see CG-147.
-
Jacketed large scale process reaction vessels. The 50 and 100L vessels have a 400mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964 and CG-1969-A beaded pipe adapters. Reactors have a 3"; beaded pipe valve that is detachable. These flush…
-
Heavy wall pressure vessel is the same as CG-1880, but shaped similar to a round bottom flask with a #25 internal thread for use with a PTFE bushing as a pressure seal. Complete apparatus is supplied with vessel, back seal solid PTFE bushing and viton o-ring. Other vessel sizes and safety plastic…
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread. Auto-Stop When Opening the Valve. Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve. Zero Dead Space Perfluoro O-Rings on Tip and Plunger The CG-1968-GL…
-
5L ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
30L Process Reactor Sytems
ChemglassComplete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…
-
Adapters, Beaded Pipe, Aluminum
ChemglassAluminum transition adapter from beaded pipe on the inlet/outlet of the reactor to NPT. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.