These test tube baskedts are made of polypropylene. These autoclavable, unbreakable, and non-corrosive baskets are ideal for rinsing and draining glassware. They are also useful for storage of test tubes or culture tubes during sterilization or incubation.

Organize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter

MTC Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is…

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

BioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…

Move tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

Fit most centrifuge tubes in the tightness-tested Thermo Scientific™ Nunc™ Conical Tube Rack. Hold 6 x 200mL tubes or 20 x 50mL tubes Epoxy/steel or expanded polystyrene foam Meets USP Class VI

Durable racks for transport or sample handling. Rack suitable for Bijou bottles and low profile tubes up to 25 mm dia Available in a 2 x 6 or a 5 x 10 format Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable

This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…

Unique system for transporting blood tubes, urinalysis tubes and other routinely transported tubes. System consists of dense protective foam die cut. Each individual die cut hole can be torn apart to ship individual tubes.   Shelf life: 24 months

A rack for every application Quickly change tube sizes with this adaptable polypropylene rack. Open the iris with a turn of the knob or directly insert a tube into the opening. Holds up to 12 similar size tubes. Imprinted references for easy identification. Generously-sized handles for easy…

96-well rack is ideal for the storage and handling of Axygen 0.2mL and 0.5mL PCR tubes Fluorescent color: blue, green, violet, red, yellow Made of polypropylene Lids included Durable, chemically inert, and can withstand extended duration at sub-zero temperatures 5 Racks/Unit; 5 Units/Case

Holds two sizes of conical bottom tubes Polystyrene foam racks are designed to hold Corning 15 and 50 mL conical bottom plastic centrifuge tubes in the same rack.

Keeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…

labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations.  Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.

Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 0.5 ml microcentrifuge tubes, 7.5 mm in diameter Overall…

Manual Tube Presenter It is not unknown, under the busy everyday conditions in the lab, for the wrong tube to be inadvertently removed from the tightly packed SBS / CRYO rack. D5 quickly turns into E6. Even if the error is detected during the scan, the process flow is interrupted. However,…

Compact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")

These Twisty Tube racks made of Polypropylene (PP) make dilution and concentration study easier as it can transfer samples between 0.2ml PCR tubes to 0.5, 1.5 and 2.0ml tubes. Can be rotated and customized according to end-user application. These racks have tapered wells that securely suspend tubes…

Open top racks manufactured from polypropylene Open top available for 8, 12 and 15mm diameter vials Colored vial box racks with lid made from high density polypropylene

Universal, three position acrylic stand with neoprene pad for supporting tube racks. Fixed angles at 25°, 35°, and 45° Size: Holds racks up to 5.50” high and 8.50” wide Ideal Uses: Holding tube-filled racks at a comfortable positing for easier pipetting

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 conical 15 mL tubes

Labcon 80-Place Rack Hinged Storage Box. For use with 80-place storage racks this box is autoclavable (122°C) and freezable (-80°C). Made of polypropylene. With hinged clear lid For use with 80 place tube racks Accepts one 80 place rack for freezer storage Freezable to…

Polypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…

Polystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top