Purification & Additives, 1 L
-
Methylamine (40% solution in water) for synthesis
MilliporeSigmaMelting Point: -40 C Density: 0.90 g/cm3 at 20 C
-
Silicon tetrachloride for synthesis
MilliporeSigmaCAS Number: 10026-04-7 UN Number: UN1818 Solubility: (20°C) (decomposition) Melting Point: -70°C Molar Mass: 169.90 g/mol Boiling Point: 57°C (1013 hPa) Vapor Pressure: 260 hPa (20°C) Density: 1.48 g/cm3 (20°C) pH: 1 (5 g/l, H2O)
-
Giemsa's azur eosin methylene blue solution for microscopy
MilliporeSigmaUN Number: UN1230 Solubility: (20°C) soluble Boiling Point: >65°C Flash Point: 18°C Explosion Limit: 5.5 - 36.5 %(V) Methanol Density: 0.99 g/cm3 (20°C) Ignition Point: 455°C pH: 6.1 - 7.0 (H2O, 20°C) (undiluted)
-
Diethyl ether EMPLURA®
MilliporeSigmaCAS Number: 60-29-7 UN Number: UN1155 Solubility: 69 g/l (20°C) Melting Point: -116.3°C Molar Mass: 74.12 g/mol Boiling Point: 34.6°C (1013 hPa) Vapor Pressure: 587 hPa (20°C) Flash Point: -40°C Explosion Limit: 1.7 - 36 %(V) Density: 0.71 g/cm3 …
-
Propionic acid for synthesis
MilliporeSigmaSynonyms: Propionic acid; Methyl acetic acid Molecular Formula: C3H6O2 Molecular Weight: 74.08 Linear Structural Formula: C3H6O2 MDL Number: MFCD00002756 Purity: >=99.0% (GC) Melting Point: -20 C Density: 0.993 g/cm3 at 20 C
-
UN Number: UN1230 Solubility: (20°C) soluble Boiling Point: 65°C Vapor Pressure: 125 hPa (20°C) Flash Point: 12°C Explosion Limit: 5.5 - 36.5 %(V) Methanol Density: 0.79 g/cm3 (20°C) Ignition Point: 455°C
-
CAS Number: 64742-49-0 UN Number: UN1268 Solubility: (25°C) insoluble Boiling Point: 107 - 137°C (1013 hPa) Vapor Pressure: 30 - 40 hPa (20°C) Explosion Limit: 0.8 - 6.5 %(V) Density: 0.728 g/cm3 (15°C) Ignition Point: 250°C Viscosity Kinematic: …
-
Ethyl methyl ketone (2-butanone) EMPLURA®
MilliporeSigmaCAS Number: 78-93-3 UN Number: UN1193 Solubility: 292 g/l (20°C) Melting Point: -86°C Molar Mass: 72.11 g/mol Boiling Point: 79.6°C (1013 hPa) Vapor Pressure: 105 hPa (20°C) Flash Point: -4°C Refractive Index: 1.3814 (15°C) Explosion Limit: …
-
Methanol hypergrade for LC-MS LiChrosolv®
MilliporeSigmaLiChrosolv hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode). Thanks to their low level of ionic background and low ion suppression, LiChrosolv hypergrade solvents provide high…
-
1-Chloronaphthalene for synthesis
MilliporeSigmaCAS Number: 90-13-1 UN Number: UN3082 Solubility: 0.009 g/l (20°C) Melting Point: -6°C Molar Mass: 162.61 g/mol Boiling Point: 259°C (1013 hPa) Vapor Pressure: 0.05 hPa (20°C) Flash Point: 115°C Density: 1.19 g/cm3 (20°C) Ignition Point: …
-
Span® 80 for synthesis
MilliporeSigmaCAS Number: 1338-43-8 Solubility: (20°C) insoluble Molar Mass: 428.60 g/mol Boiling Point: >100°C Flash Point: Refractive Index: >149°C Density: 1.0 g/cm3 (20°C)
-
Ethyl salicylate for synthesis
MilliporeSigmaCAS Number: 118-61-6 Solubility: 0.25 g/l (20°C) Melting Point: 1.3°C Molar Mass: 166.17 g/mol Boiling Point: 232°C (1013 hPa) Vapor Pressure: 0.1 hPa (20°C) Flash Point: 100°C Explosion Limit: 1.1 %(V) Density: 1.13 g/cm3 (20°C)
-
Propiophenone for synthesis
MilliporeSigmaCAS Number: 93-55-0 Solubility: 2 g/l (20°C) Melting Point: 18°C Molar Mass: 134.17 g/mol Boiling Point: 214 - 218°C (1013 hPa) Vapor Pressure: 1.99 hPa (20°C) Flash Point: 85°C Refractive Index: 1.5258 (20°C, 589 nm) Density: 1.01 g/cm3 (20°C)
-
UN Number: UN3334 Solubility: 1880 g/l (20°C) Melting Point: -10°C Boiling Point: 100°C (1013 hPa) Vapor Pressure: 31 hPa (25°C) Flash Point: >93°C Density: 1.08 g/cm3 (20°C) pH: 6.0 - 7.0 (H2O, 20°C)