Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…

PFA-200 Microflow Nebulizer, 200 µL/min, with integrated autosampler probe [Ultem support] for ESI SC Autosampler. HF Resistant. Capillary length 150cm. Probe length 175 mm.

Agilent torches and accessories are fully compatible with your PerkinElmer ICP-MS. The high efficiency demountable quartz torch operates at 25% reduced argon gas flow compared to the demountable quartz torch. The standard Agilent guarantee applies to our chemistries and supplies for PerkinElmer…

This one-piece SilQ torch, marked white, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Semiconductor Configuration's Sample Intruduction Kit (N8150037).

Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…

Material: Borosilicate glass  High physical reproducibility ~ 1%, TDS tolerance, typically up to 20%, High tolerance to particulates, typically up to 75um, Low RSD's due to highly accurate construction

Spray chamber assembly, Mark 7, complete, for flame AA, for aqueous/acidic samples. Includes mixing paddle, fluorinated, p/n 110637000, spray chamber body, fluorinated, p/n 6210092090, pressure relief bung, fluorinated, p/n 1610118800, nebulizer block, p/n 9910093100, integrated nebulizer…

The Agilent Technologies 2 mm injector assembly with twisting capability is made from PFA-platinum material that ensures a smooth flow of liquid. Application: For ELAN DRC-e/9000/6x00/5000/500/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For…

The Agilent Technologies spray chamber retaining ring provides good resistance to corrosion and conforms well with Ryton Scott spray chamber and twist-type torch mounts. Application: For Scott spray chamber, for ELAN 9000/6x00/5x00/DRC-e/NexION, PerkinElmer ICP-MS Instruments This product is…

Agilent ICP-OES inert torches with alumina/ceramic injectors allow the analysis of samples containg hydrofluoric (HF) acid. HF resistant torches/injectors are suitable for handling HF digests unlike standard quartz injectors where the free HF attacks and degrades the quartz components. Inert…

The Agilent Technologies spray chamber O-ring is ideal for baffled quartz cyclonic spray chamber with ball joint. It is suitable for ELAN 9000/6xX00/DRC, NexION and PerkinElmer ICP-MS instruments. Application: For Baffled Quartz Cyclonic Spray Chamber (Ptfe O-Ring Type) with Ball Joint. Suitable…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies ultraclean concentric nebulizer with an uptake rating of 400 is self-aspirating in nature and is made from strong PFA for added strength. It works well with aqueous, HF acid, organic solvents and strong acids. Application: For PerkinElmer ICP-MS This product is only…

The Agilent Technologies HF-resistant chemically inert sample introduction kit includes two PFA MicroFlow nebulizers, PFA endcap with extra gas port, PFA spray chamber, PT injector and shield, quartz torch. This kit is suitable for use with PerkinElmer ICP-MS instruments. Application: For…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies seaspray nebulizer conforms well with aqueous as well as organic solvents and the EzyLok connection ensures a secure fit. Borosilicate glass construction provides added strength and impact resistance. This product is only available to U.S. Domestic Customers. For…

Agilent torches and accessories are fully compatible with your PerkinElmer ICP-MS. The high efficiency demountable quartz torch operates at 25% reduced argon gas flow compared to the demountable quartz torch. The standard Agilent guarantee applies to our chemistries and supplies for PerkinElmer…

The Agilent Technologies demountable 2 mm injector sapphire tube is ideal for HF-resistant sample introduction system. It is suitable for ELAN DRC-e/9000/6x00/5000/NexION and PerkinElmer ICP-MS instruments. Application: For Hf-Resistant Sample introduction System, . For ELAN…

The Agilent Technologies microflow nebulizer with an uptake rating of 400 is made from strong PFA for added strength and is self-aspirating in nature. It works well with aqueous, HF acid, organic solvents and strong acids. Application: For PerkinElmer ICP-MS. High Performance, Clog Resistant,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent nebulizers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision and reduced interferences, so you can use them with complete confidence. They come complete with the PE gas and liquid connectors for use right out of the box. Application:…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent torches and accessories are fully compatible with your PerkinElmer ICP-MS. The high efficiency demountable quartz torch operates at 25% reduced argon gas flow compared to the demountable quartz torch. The standard Agilent guarantee applies to our chemistries and supplies for PerkinElmer…

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

The Agilent Technologies spray chamber connector is made from EzyLok technology that helps in preventing any kind of penetration and is used with jacketed spray chamber. Application: For Jacketed Spray Chamber. Suitable for PerkinElmer ICP-MS This product is only available to U.S. Domestic…

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

Agilent nebulizers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision and reduced interferences, so you can use them with complete confidence. They come complete with the PE gas and liquid connectors for use right out of the box. Application: For…

The Agilent Technologies nebulizer sample inlet fitting measuring 0.02 Inch x 0.062 Inch OD x 4 Inch L helps in the smooth connection of CTFE female fitting with a male barb fitting. Application: For Type A/C/K Concentric Nebulizers, Flanged Onto Ctfe Female Fitting with Male Barb Fitting.…

The Agilent Technologies sample inlet fitting measuring 0.75 mm x 700 mm provides an efficient and secure connection to any U-series concentric glass nebulizer. Application: For U-series concentric Glass nebulizer. Suitable for ELAN 9000/6xX00/DRC & NexION This product is only available to U.S.…

Agilent nebulizers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision and reduced interferences, so you can use them with complete confidence. They come complete with the PE gas and liquid connectors for use right out of the box. Application: For…