Nebulizers, ICP-MS, Protein Purification Chromatography Media
-
The MEINHARD concentric glass nebulizers reflect exacting standards in design and manufacturing. They provide excellent sensitivity and precision for aqueous solutions and samples with few dissolved solids (less than 1%). MEINHARD nebulizers for Optima instruments include Standard Nebulizer…
-
SeaSpray U-Series Nebulizer 1mL/min
PerkinElmerMaterial: Borosilicate glass High physical reproducibility ~ 1%, TDS tolerance, typically up to 20%, High tolerance to particulates, typically up to 75um, Low RSD's due to highly accurate construction
-
Type C0.5 Glass Nebulizer for NexION
PerkinElmerThe MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…
-
The GemCone low-flow nebulizer permits lower nebulizer flow rates, useful for spectral lines with high excitation energies and for providing a more robust plasma. The nebulizer is optimized for low nebulizer gas flow for use with cyclonic spray chambers. It requires an end cap (N0680504) for use…
-
Nebulizers And Nebulizer Supplies
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
-
2 mm gas line with UpChurch fingertight fittings for Mira Mist and Ari Mist nebulizers.
-
This nebulizer self-aspirates at low-flow rates with any autosampler and provides the same benefits of the PFA MicroFlow nebulizer. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is…
-
The PEEK Mira Mist ® nebulizer produces excellent mist and can handle high level of particulates in sample. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features include standard pressure (45 psi), low sample flow and enhanced parallel path design.
-
The UniFit connector is a convenient drain connector for glass cyclonic spray chambers.
-
Replacement connector and sample tubing for glass concentric nebulizers with EzyFit sample inlet.
-
ICP-OES Nebulizers
Agilent TechnologiesAgilent offers a wide range of concentric and microconcentric glass nebulizers to facilitate sample introduction for a variety of ICP-OES measurements. Nebulizer styles can accommodate samples with up to 20% total dissolved solids (TDS) and slurry samples containing more than 20% total dissolved…
-
The Cross-Flow II Nebulizer is made completely from chemically inert non-metallic materials. With new GemTips optimized for ICP-MS(0. 009in and 0. 013in orifices), the new ICP-MS Cross-Flow II Nebulizer is specially manufactured and cleaned for ultra-trace analysis. Providing high sensitivity and…
-
Cyclonic spray chamber drain fitting
PerkinElmerCyclonic spray chamber drain fitting with ETFE capillary tubing - 24 length by 0.030 ID x 0.062 OD.
-
Gem tip Cross-Flow II Tip Kits for Optima 8x00
PerkinElmerThe PerkinElmer GemTip Cross-Flow II Tip Kit is for use with the Optima 8x00 ICP-OES. Excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids. The Tip Kit includes a clear sapphire sample tip and a red ruby argon…
-
PFA-200 Microflow Nebulizer 20 uL/min
PerkinElmerPFA-200 Microflow Nebulizer, 200 µL/min, with integrated autosampler probe [Ultem support] for ESI SC Autosampler. HF Resistant. Capillary length 150cm. Probe length 175 mm.
-
The PEEK Ari Mist ® nebulizer provides very low sample flow and is for samples that are particlate free. Operates on stand pressures of 40 - 50 psi. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features an enhanced parallel path design.
-
Type A0.5 Quartz Nebulizer for NexION
PerkinElmerThe MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…
-
Fused Silica Obstruction Removal Kit for ST type Nebulizers. Used to clear blockage from ST type nebulizers. Inc Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final…
-
Adapter Tubing GemTip Nebulizer
PerkinElmerUsed to connect capillary tubing (Product Number: 09908265) to Cross-flow nebulizers, and to larger i.d. peristaltic pump tubing.
-
PFA MicroFlow high solids large bore nebulizer with external 1/4-28 threaded connector. Ideal for strong acids, high solids, alkalis, organic solvents, soils and high salt solutions.
-
Capillary Tubing 18 0.043 x 0.017 for Mira Mist
PerkinElmer0. 5 meters of . 044 OD X . 018 ID. Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.
-
The UniFit sample tube connector is used with U-Series nebulizers.
-
Complete HF-resistant sample introduction system for NexION 300 and 350. All wetted surfaces are PTFE and Sapphire. Provides a chemically inert and clean introduction system. This kit includes: 47 mm PFA Barrel Spray Chamber with Endcap (N8142000) PFA-ST Nebulizer (N8122192) 1.8 mm I.D.…
-
Concentric PTFE Nebulizer - PFA-ST
PerkinElmerUltraclean PFA PTFE nebulizer with exchangeable capillaries to provide flow rates from 100-400 uL/min. For use with autosamplers. Requires union N8122355 to connect to autosampler probe.
-
One Sample Introduction Line for PFA-ST Nebulizer is included in the NexION 2000 ICP-MS Productivity Configuration's Consumable Kit (N8150056) and the Semi Configuration's Consumable Kit (N8150057).
-
GemTip Crossflow Nebulizer
PerkinElmerContains a PPS (carbon-filled polyphenyl sulfide) end cap with a Gem Tip clear sapphire sample tip and a Gem Tip red ruby argon tip.
-
-
The DuraMist concentric nebulizer is an economical nebulizer for high precision analyses involving samples digested in HF. The DuraMist nebulizer is recommended for samples containing up to 5% HF. For samples with higher concentrations of HF, the OpalMist PFA nebulizer is recommended.
-
Slurry Nebulizer 4mL/min for ELAN/NexION
PerkinElmerMaterial: Borosilicate glass High physical reproducibility ~ 1% TDS tolerance, typically ~ 1% High tolerance to particulates, typically up to 150um Low RSD's due to highly accurate construction Slurry nebulizers have a natural liquid uptake of 4mL/min but operate best between 1.5 - 2.5mL/min
-
-
The UniFit sample tube connector is used with U-Series nebulizers.