General Lab Products, Bellco Glass, Supplies
-
Digital IOB Insect System 3L 115v
Bellco GlassDesigned for growing insect cell cultures such as sf9 and sf21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression. Consist of: 7785-d2005 digital 5-position magnetic stirrer, 115v 1965-13000 micro-carrier spinner flask, 3l 1965-60030 iob…
-
Size: 1.5ml Material: homo-polymer polypropylene Color: natural Individually wrapped
-
1.7in. Probe Holder 45mm
Bellco GlassBellco stainless steel probe holder is designed to be used with our 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow ph and do monitoring via insertion of these probes into the sidearms of the vessels. Threaded probe adapters are…
-
Round Bottom Marine Impeller 36L
Bellco GlassDimensions: 1/2? od x 7 1/2? long Stainless steel 4? od right hand pitch marine prop & e-clip Material: 316l stainless steel with electropolish finish For round bottom omni vessel (1964-88405) Need l/f head plate, over head drive motor Size: 36l
-
Bellco Heating Blanket 230V-500mL 50 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 500ml Watts: 50 Dimension (in.): 1 x 10.5 1 latch 6ft…
-
Round Bottom Marine Impeller 15L
Bellco GlassDimensions: 1/2? od x 12 1/2? long Stainless steel 4? od right hand pitch marine prop & e-clip Material: 316l stainless steel with electropolish finish For round bottom omni vessel (1964-88405) Need l/f head plate, over head drive motor
-
Stainless Probe Capseal 3L w/ PTFE IOB 4Ports
Bellco GlassThe stainless steel 100mm iob probe cap seal is manufactured from 316l stainless steel and has a red-silicone sealing gasket with a 100mm blue polypropylene screw cap. The stainless steel probe cap seal has four accessory ports surrounding a centrally located internal impeller assembly. Two of…
-
Acrodisc filter tube assembly with hose fitting for use on large flange vessel stainless steel head plates that utilize 1/4" fittings. 50mm 0.2 micron filter 316l stainless steel fittings 1/4" od x .152" angled tube
-
IOB Impeller Assembly 8L
Bellco GlassStainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 8l Paddle: 6 3/4" x 5"
-
Large Flange Air Stone Sparger 15L
Bellco GlassLarge flange air stone sparger for large flange vessels. Fits through stainless steel head plate fitting. These spargers fit through a 5/16? fitting. 316 l stainless steel Ra 32 finish or better Acrodisc filter assembly, 0.2 micron
-
Bellco Heating Blanket 115V-3L 130 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Flask size: 3l bioreactor vessel (1964-88403) Dimensions: 15? x 2.5? tall with 1 latch Watts: 130 heating @ 5 watts per sq inale iec connector for use…
-
Valley Heating Blanket 115V-1L 75 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Watts: 75 Dimension (in.): 1.5" tall x 13 3/4" diameter 1 latch…
-
Stainless Steel 3-Port Assembly 6L
Bellco GlassSize: 6l Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4" x 5/32" Longest tube: 10 1/2" at curve
-
Stainless Steel 2-Port Assembly 3L
Bellco GlassAll port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene screw cap and white silicone gasket. Size:…
-
316l stainless steel bent harvesting tube for 36l flat bottom omni vessel. Use with large flange head-plate. Size: 1/2" x 22" Id: .430"
-
Compression Fitting 5/16in. For 1/2 Hole"
Bellco GlassBellco compression fittings are designed using our standard 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow ph and do monitoring via insertion of these probes into sidearms or vessels. Bellco probe adapters are designed to allow…
-
Large Flange Z/Z Paddle 8L
Bellco GlassManufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. Blade dimension: 5 3/4 x 2 1/2? Shaft oal: 12" Marine impeller includes 1/2? shaft and impeller blade Omni and z-z paddles…
-
Digital IOB Insect System 3L 230v
Bellco GlassDesigned for growing insect cell cultures such as sf9 and sf21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression. Consist of: 7785-d2015 digital 5-position magnetic stirrer, 230v 1965-13000 micro-carrier spinner flask, 3l 1965-60030 iob…
-
Air Stone Sparger 3L For MC Spinner Flasks
Bellco GlassGently introduces bubbles into vessels. Includes 45mm polypropylene cap and white silicone gasket. 316l stainless steel 20 ra finish Size: 3l 12mm od coarse glass frit 0.2um Acrodisc filter w/ hose fitting
-
-
Bellco Heating Blanket 230V-36L-Medium Watt 600 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 36l Watts: 600 (can be used with CellTrol) Dimension…
-
Large Flange Round Bottom Vessel 15L
Bellco GlassHeavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with CellTrol ii only single or dual systems, and speed control modules.
-
Large Flange Omni Paddle 8L
Bellco GlassBlades and impeller assemblies are use for cell culture. Reduces shear in delicate cell culture. Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Blade dimension: 5 3/4 x 2?. Shaft oal: 12 1/2?. Constructed of 316l electropolished stainless…
-
Stainless Steel 3-Port Assembly 36L
Bellco GlassSize: 36l Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4" x 5/32" Longest tube: 12 1/8" at bend
-
Silicone Headplate O-Ring 3L #254
Bellco GlassSilicone headplate o-ring for 3l bioreactor systems. Size: 254 Material: red silicone rubber Dimensions: od x id: 5.762?x 0.139? thick Size: #254
-
Stainless steel curved harvesting tube for 15l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 15l Dimensions: 1/4" x 5/32 x 22"
-
Straight Harvesting Tube 6L 1/4"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: odxid:1/4? x 5/32? x 6.0? long
-
Bellco Heating Blanket 230V-15L 750 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 1200 - not to be use with CellTrol Watts: 1200 Dimension…
-
Large Flange Round Bottom Vessel 8L
Bellco GlassHeavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with CellTrol ii only single or dual systems, and speed control modules.
-
Glass Micro-Carrier Impeller Shaft 15-36L
Bellco GlassManufactured from type 1 class a Borosilicate glass. For spinner flasks 3l to 36l Dimensions: 9mm x 500mm long
-
Compression Fitting 1/4in.
Bellco GlassBellco compression fittings are designed using our standard 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow ph and do monitoring via insertion of these probes into sidearms or vessels. Bellco probe adapters are designed to allow…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)