Flasks, Supplies, Chemglass
-
FLASKS, FERNBACH, 2800ML, WITH 6 BAFFLES, 2800mL flask with 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to help oxygen transfer to the culture medium. FLASKS, SHAKE, NO BAFFLES, DELONG NECK, WITH STAINLESS STEEL CLOSURES, Non-baffled flasks…
-
Flask, Trypsinizing
ChemglassManufactured from Type 1 Class A borosilicate glass with FOUR deep side baffles for optimum agitation during trypsinization. Flask comes with beaded, break-resistant lips and 50mm OD necks. Sold 1 per case.
-
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
-
Round bottom, HEAVY WALL two neck flask with standard taper outer joints on both the center neck and angled side neck. Flasks with 10/30 side neck are for use with CG-3506 thermometers. The 29/26 center neck flasks have a groove tooled just below the grind to aid in clamping of the flask.
-
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two angled sidearms…
-
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker.
-
Unbreakable Dewar flask is made entirely of Stainless Steel. Dewar flask has many flexible laboratory applications including cooling of small samples and as an insulating flask. Furthermore, it can be used for storage and transport of liquid nitrogen LN2, dry ice CO2, and…
-
Round bottom storage flask which can maintain dry, grease-free and deoxygenated solvent storage for long periods of time. Unique design permits filling of the flask using a 24/40 inlet off of a vacuum line and recovery of the solvent via a cannula or syringe through the valve body.
-
Flasks, PFA, Round Bottom, Three Neck
ChemglassAll PFA three neck round bottom flask with standard taper outer joint center neck and two additional 20° angled side necks. Allows assembly with a temperature probe, electrode or tube. Flask can withstand MAX temperature of 250°C and a MIN temperature of -200°C.
-
Manufactured from borosilicate glass these wine testing volumetric flasks have wide bases and a flat bottoms for stability. Flask neck is graduated in 1mL subdivisions from 680 to 780mL. The long neck is calibrated To Contain at 20°C and markings indicate the volume of liquid when filled to…
-
Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large permanent white letters make the capacity clearly visible. Flasks are calibrated "To Contain" at Class A tolerances, per ASTM E288…
-
Round bottom, HEAVY WALL flask with a standard taper outer joint and a side well to accept a thermometer. Top of thermowell is tooled to accept a #0 rubber stopper.
-
Glassblowers Flask Blanks, Erlenmeyer
ChemglassBlanks for fabrication of Erlenmeyer shaped flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Lower half of flask has a jacket permitting heating or cooling of the contents with fluid from a constant temperature bath. The unique design of the Chem-Drain valve incorporates a PTFE plunger that allows the contents of the flask to drain directly through the bore of the plunger. When closed,…
-
Storage Flasks, Cajon, Airfree®, Schlenk
ChemglassStorage flask sidearm has a 9mm OD tubulation for use with 3/8" Cajon® connections. Chem-Vac™ Chem-Cap® valve is used to control gas or liquid flow into the vessel.
-
Flasks, Heavy Wall, Pear-Shaped, 2-Necks
ChemglassPear shape, HEAVY WALL 2-neck flask with standard taper outer joints. Flasks with a 10/18 outer joint on the side neck are used with either jointed thermometers or CG-1079 inlet adapters.
-
Round bottom, HEAVY WALL single long neck flask with a standard taper outer joint.
-
Round bottom, HEAVY WALL, five-neck flask with standard taper outer joints on the center neck and vertical side necks.
-
Flasks, PFA, Round Bottom, Single Neck
ChemglassAll PFA single neck round bottom flask with standard taper outer joint. Flask can withstand MAX temperature of 250°C and a MIN temperature of -200C.
-
2800mL flask with 3 baffles on the lower outside edge of the flask to help oxygen transfer to the culture medium.
-
Shake Flasks, 6 Baffles, Delong Neck
ChemglassFlask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck…
-
Flasks, Micro Volumetric, Class A
ChemglassClass "A" micro volumetric flask calibrated to contain. With 14/20 top outer joint and supplied complete with a CG-3000 14/20 hollow stopper. Flasks have hex base for stability and a V shaped interior bottom for total sample retrieval.
-
Flask has a #15 o-ring joint on the sidearm and a Chem-Vac™; Chem-Cap®; valve to control gas or liquid flow into the vessel. All sizes are of heavy wall construction, and are used with AF-0060 and AF-0061 manifolds or any other Airfree® component with a #15 o-ring joint. Supplied…
-
Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. For Larger Flasks See CG-1524.
-
Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid.
-
Round bottom single neck flask having a standard taper outer joint with a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from flask while a purge of inert gas is maintained thru the sidearm. Valve size is as listed.
-
Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum.
-
Glassblowers Flask Blanks, Flat Bottom
ChemglassBlanks for fabrication of single or multi-neck flat bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Round bottom 2-neck flask having standard taper outer joints, both being of the same size. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve. Side neck can be fitted with a CG-3022 septum…
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.
-
Minum-Ware® Round Bottom 3-Neck Flasks
ChemglassMicro round bottom 3-neck flask with all 14/10 threaded outer joints. Supplied complete with open-top screw caps (MW-102-33) and Viton O-rings (MW-100-08).
-
Heavy wall, wide mouth flask with a GL80 glass thread and a 24/40 connecting adapter. Flasks have a heavy wall for vacuum applications and are balanced to prevent run-out during rotation. Unique design makes it easier to handle highly viscous liquids, powders, and solids. The large opening permits…